Dimitri

:)/> :)/>

Sir, you still did not bring up any examples of your statements. Do it now, please. As for your products, - do not try to deceive a community please. There are no statements in a story on the link above that items you produce are copies of my past works. This is a completely different story about who you are how you came to the business. And this story is very kindred with the dirty libel you published here above.

Sir, please bring up examples to support your statements. My products speak for themselves. I have created a great number of complete kits that were produced by Collect-Aire, Classic Airframes and others. I have created a myriad of accessories under my Dmold brand and under such brands as Meteor Productions and others. It is very nice that you too have created a couple of little parts. Congratulations! Do not forget to mention that the A-6E intake you have is a cheap knock-off of my product made by a scalemodels.ru admin. Dmitri

del

There are new details about a floating of this person on ebay. Just about a month ago this person was presented on ebay as rhino_models http://myworld.ebay.com/rhino_models&ssPageName=STRK:MEFSX:SELLERID&_trksid=p3984.m1543.l2533 Can you find him under this name now? In fact, after I sent him a couple of emails via ebay board he has never replied anything as usually and he has prefered simply to change his account on ebay again. This is a regular practice of this person. But the worst that he continues to get some advertisement of the products stolen and pirated by him even on the

One more addition in our assortment of Ventura correction sets. These are corrected engine cowlings by DMold. This set will be offered separately or as a bundle with our other set for the Ventura kit. More info can be found on the DMold Modelworks website. Dmitri

I would like to draw an attention on such details as well. Despite he has never shared by any his comments here (it was expected) he has continued to make his way by shifts on the ebay. In particular, NO photo of these F-18 intake parts, as they look in the whole, were presented there all the time before. There were only few pictures of the intake mouth there and a couple of pictures showing these parts frontally. But such photo of the parts as they are has suddenly appeared there just after Dave Williams had published his photo of these parts here coming along his comment that '...this is n

I appreciate your effort to evaluate and compare F-4 intake sets. But all I can say is your approach to this question as above is not quite correct and incomplete at least. You should see and know more about these products in order to completely clarify a question on this particular set which came from ebay. There were three 1/48 F-4E intake sets on the market: by Seamless Suckers (owner passed away one year ago or so), by Cutting Edge and by DMold. Remember, Rhino Modelworks does have NO one truly original product or part! If this an 'original product' then this is just the kit parts glued t

All over again. Becouse of some reasons nobody of us, small producers, Sierra Models or AMS resin, Zactoman or TwoMikes do not have any pretensions one to another. But as it has turned out to be many of small producers have pretensions to Mr.Paul Miller from Mansfield, TX (and he is Rhino Modelworks) without any collusion. You still have not seen why?? There were not any clear comments from you or anyone else on the 1/32 F-18 set yet. Copied, not copied? Just a rumor, or guess? But we have already jumped to an another question.

But why 'mudslinging'? About S-3 intake set which stolen from Sierra Models is mudslinging?? About A-7 wheel well from Aires is mudslinging? About item which was stolen from Harold is mudslinging? And how about F-8 intake set which was my work as well and has been stolen from CE assortment? About a line of 1/48 F-4 intake sets by DMold? And how about 1/32 F-18 intake set from DMold as well? And why not budging an inch from their own arguments? Take a close look at the picture as above again, here is one more proof if someone wanted it (Maker and another his defenders). Lower curve of the

Dave, first of all thanks much for publishing these photos but don't be in a hurry with your conclusion, please. Having your picture I have got a possibility to make first pictures for initial comparison. First of all, there are few comments on the original set by DMold. Since I did not use any public graphic materials for creating this set and used my personal sketches with a pencil only the original parts by DMold do have the unique curvature which may be repeated by NO means by someone else. Now compare curves of these parts. Very and very similar, isn't it? Only difference between

Terry, you were not quite attentive at first reading a correspondence between me and this person (we know who he is now). Read this correspondence again and you will see there such lines I addressed to this person: "Thanks for notice! But why do you refuse to send me another sets for review which I asked about? In fact, I'm concerned to see 1/32 F-18 and 1/48 F-4J/RF-4 intake sets even more than 1/32 F-4 set". So, I have always drawn my attention more on F-18 and 1/48 F-04 intakes through my personal correspondence with him and on this board.

I see your position but we are not at a judicial sitting at this board and you are free for making any conclusion. After all, if you think that 1/48 F-4E, F-4J, 1/32 F-18 intake sets are original products on ebay you are free to buy them. If a photo and comments on F-8 intake set do not confirm anything for you then you can buy this stuff. If a photo of the A-7 nose wheel well is presented above does not confirm anything for you you may continue to buy it there. If comments on S-3 intake set from ebay is nothing for you you may go ahead with your purchases there as well. If a refusal of this

Maker, I see you don't want to leave me. OK. Then your line of conduct is at least strange here. At first, you were confirming facts that were already obvious. "If you go back and look, my first post in this thread was pointing out where Rhino was still selling on Ebay and that he had changed his name". This statement does not add anything and appeared to be just one more advertisement for these sales. "I also posted Mike V's quote talking about sanding scratches on the parts and questioned why people were defending Rhino". Becouse it was not proved. 'I assumed that you had at least studi

Hmmm..., to report where a country are you from is sharing by a 'personal' information? And how about IP address behind you? Anyway, your Mom was a smart woman! And what does mean your phrase 'prove..if you can'? And finally. Did your Mom not tell you that 'to thieve' is a very bad business?... I compelled to leave this thread since a complete information about Rhino and his products has been already presented here.

I liked your comment! Can you tell us about you a little here, by the way? You take an active participation in this conversation and it would be interesting to hear something about you. Where are you from? I mean a country, at least.

Trying to order these items I got a notice in red: "Seller not accepting your bid". How it may be considered? No proofs??

OK. I will put my order just now.

Thanks for the link, Tricose! This person whote to me that he used the kit molded parts for creating this 1/32 F-4 intake set and this is possible 'in principle' (a correspondence between me and this person is on the previous page here (highlighted link). Thus, since the intake set by DMold is originally molded and does not have any commonity with the kit parts he could be sure that there will be an obvious difference between these sets. That's why he had agreed to send this 1/32 F-4 set ONLY. But a completely different situation is with 1/48 F-4E or F-4J Hasegawa kits which do not have a

To exclude any misinterpretation. I continued my correspondence with this person and just sent a notice to him via the same ebay messaging system. Text of this message: "I would like to make you aware about this thread on ARC forum http://s362974870.onlinehome.us/forums/air/index.php?showtopic=228880&st=60 You wrote below that these comments 'insult you and your company'. Now this has been done publicly. Would you like to share some of your own comments at this board?"

My ethics does allow me to pay a thief NO one cent. A sence of this thread is to explain that the things which are being sold on ebay under Rhino Modelworks trademark are nothing else than just stolen articles from another producers. If you are ready to pay such persons, OK. I'm not.

Yes, this is not a direct copy, indeed :)

If this person has never copied anyone's stuff and he is clear with his business why he has never provided the products he was asked for review? Why he has never appeared on this board despite of so obvious and public pretensions to him? What's answer? Correspondence with him is reloaded here

Yes, it becomes obvious that this Rhino is a source of stolen articles from various producers on ebay. F-8 intake sets there, - yes, this is a direct copy of the original Cutting Edge release as well. Only difference is the nose wheel well which was given seperately in the original release but firmly glued to the intake trunk now. I know it very well becouse I was working on the master for this set and can recognize this set without any problems. It is possible to compare original master and castings from ebay at this picture I do also have already molded plastic shells for creating a new m

Yes, actually, strange strange takes place on ebay. I looked over this page earlier this day and nothing was presented there with the exception of 1/48 F-18 intake sets. Also, obviously this person does not intend to provide any of this stuff for review and completely ignores all pretensions to him on this board. It seems similar persons feel themself very well there, on ebay, - exactly as I described above. Sorry to see it.