Jump to content

seiran01

Members
  • Content Count

    451
  • Joined

  • Last visited

Everything posted by seiran01

  1. Hi all, I have the following that I'd like to sell (prices do not include postage, from Washington DC area). Paypal is preferred but not required. Please message me or email me (mikeswinburne@gmail.com) if interested. Thanks for looking! Mike 1/24 Airfix Hawker Typhoon: $100 1/32 Wingnut Wings Roland C.IIa Wahlfisch (late) $95 1/32 Wingnut Wings Albatros D.Va (discontinued) $115 1/32 Wingnut Wings Fokker D.VII(fok) (discontinued) $140 1/48 Trumpeter Wellington Mk.I $50 1/48 Hobby Boss Hellcat Mk.I (RN/FAA schemes) $10 1/48 Special Hobby Airspeed Oxford Mk.I/II 'commonwealth servic
  2. As much as I want to build this plane, it's just not going to happen in the foreseeable future so up for sale is my Tigger Models (Ex-ID Models) P-3 Orion with the rather nice Lone Star engine cowls/spinner/prop set. Note that the tail is cut off the fuselage halves, this is how it was shipped to me - if you have the skill to build a vac, this won't be an issue! For those wondering about the size, the fuselage is roughly the same length as an Italeri C-130 Asking $120 + postage from the DC area for the combo. Paypal is preferred. Please email me at mikeswinburne at gmail dot com if interest
  3. Hi all, I have a few kits for sale from the DC area. Will ship worldwide at cost. Paypal preferred, check/MO also ok, cash is strictly at your risk. Sorry, no trades at this time. Please email me if interested at mikeswinburne@gmail.com. Thanks for looking! Mike 1/32: Roden Nieuport 24bis, sealed box $25 Wingnut Albatros D.Va, 2 kits, $120 each Wingnut Fokker D.VII (fok), 8 kits, $140 each Wingnut Fokker D.VII (alb), 2 kits, $75 each Wingnut Fokker D.VII F, 3 kits, $75 each 1/48: Trumpeter Wellington Mk.Ic $50 Special Hobby Fairey Firefly Mk.I "Postwar Foreign" $35 Special Hobby
  4. Hi all, I have a number of 1/32 Roden kits for sale/trade, and also a large list of Wingnut Wings kits that I'd like to get my hands on. Because of the size of the list, I've made a google spreadsheet that I can update in real time. Please take a look and email me if interested in buying/selling/trading anything, I'm in the Washington DC area (Burke, VA). The spreadsheet can be viewed online here My email address is mikeswinburne (At) gmail dot com Thank you for looking! Mike Swinburne
  5. Hi all, I have the following kits that I'm looking to sell, or trade for Wingnut Wings kits. These will be shipping from the Washington DC area to anywhere on the planet. Please have a look at the list below and email me at mikeswinburne at gmail.com if you are interested in any of these. Paypal is preferred, postage is not included (postage to the West coast US will be approximately $10 for 1-2 kits). Thanks for looking! Mike Swinburne mikeswinburne@gmail.com Roden 1/32 scale for sale: Albatros D.I - 3 kits, $43 each Albatros D.II (Encore kit - Roden plastic + extras) - 3 kits, $43
  6. Hi ARCers! I have the following items for sale from the Washington DC area, or to trade Wingnut Wings kits from the wants list at the end of the post. Paypal preferred, postage is additional. Please email me if interested at mikeswinburne at gmail dot com or message me through the board here. Thank you for looking! Mike 1/35 Kits: Tamiya Mk.IV Male tank $90 MRC AH-1T+ Super Cobra $10 1/32 Decals: Rocketeer me163 - about 20 options including prototypes and a red/white French 163 in civilian markings (!) $15 Ventura RNZAF P-51D (one option) $5 Ventura RNZAF F4U (one option) $5 Ventur
  7. Hi Dmitri, are you able to send any pics, or direct me to info online, for the japanese catapult? I recall seeing something years ago but I can't find any info at all now. Thanks! Mike Mikeswinburne at gmail dot com
  8. Hi all, it's "spring" cleaning time again and I have the following for sale so that I will be able to afford the upcoming Wingnut Felixstowe kit. Please email me if interested at mikeswinbutne (at) gmail.com. Worldwide shipping at cost from the US, paypal preferred. Thanks for looking! 1/48 Airfix Spitfire kits and combos: Spitfire 19 combo: kit sealed in open box, plus 3x barracuda vac canopy, 1 each barracuda cockpit, propeller, and exhause sets, and Model Alliance Photo Recon Spitfires pt.3 decal set which includes 3 RAF, 1 Thai, and 1 Swedish pr.19's plus decals for 2 postwar FR mk.18s
  9. Hi all, I have a few Wingnut kits for sale, in addition to the new Revell Luftwaffe Phantom with the orange and black retirement scheme - bought this at the local hobby shop and then realized that Syhart had released decals in 1/48 for it, which is my preferred scale now. Please email (mikeswinburne@gmail.com) or PM if interested. Paypal preferred, worldwide shipping at cost. Thank you for looking! Mike Revell F-4F Phantom II WTD 61 Flight Test (kit 04895) - open box, everything minty fresh inside. $50 Wingnut Wings: Roland C.iia Early: $90 Albatros D.Va OAW $60 Fokker I.IV $60 Sopwi
  10. Thanks to everyone who helped me reduce the WNW sale pile. There are a few remaining kits of those as listed below, additional to new items for sale in 1/32 and 1/48. Please email me if interested at mikeswinburne@gmail.com Paypal preferred, worldwide shipping at cost from Washington DC area. Thanks! Mike 1/32 Wingnut Wings: Pfalz D.IIIa $64 Decal Set - Pfalz D.III Flying Circus part 2 (#30020) $15 Sopwith Pup (RNAS) $64 Fokker E.IV $64 1/32 Other Grey Matter Spitfire XIX conversion - This one will need a PCM spitfire 14, as it does not include the resin griffon cowl. Will need to s
  11. Hi folks, My patio project is working out more expensive than I estimated and feel I should probably help offset some of the costs by removing a few more kits not considered "must own" subjects. In large scale, this means WNW kits and a decal set. Please contact me on item(s) below if interested at mikeswinburne@gmail.com. Postage not included, from 22015 (Burke, VA) to anywhere on the planet. Paypal or Square Cash preferred. Thanks for looking, Mike Decal Set - Pfalz D.III Flying Circus part 2 (#30020) $15 Kits: Gotha G.IV: $130 AMC DH.9 $95 Pfalz D.IIIa $65 Sopwith Snipe (Early) -
  12. Hi all, I'd like to sell more of my kits and aftermarket off. This time it's 1/32 display bases, 1/48 airfield/soft armor vehicles, and 1/48 aircraft kits and aftermarket. Please see photos below, prices are marked above each photo. Yes I am open to reasonable offers! Please email me if interested in anything - mikeswinburne@gmail.com Paypal is preferred, postage is additional, shipping worldwide from the Washington DC area. Thanks for looking! Mike 1/32 bases True Details PSP Marsden Matting (unpainted square base, about 16x16" (40x40cm) $20 Zoukei Mura PSP Marsden Matting (prepainted
  13. Hi Russ, I must have missed that sorry - I'm all set on the otter kit but am still looking for the others. cheers, mike
  14. Has anyone heard any credible rumors or announcements for an AW 109 or nh90 heli in 1/48 scale? These two birds are large gaps missing in my collection of Royal New Zealand Air force/Navy aircraft. Thanks!
  15. Bump and edit - I've found the conversion sets (thanks, guys!) and have a few more rarities listed above that I "need" to track down. Cheers!
  16. JWest - I think I probably have the decal sheet (Gekko Graphics, most likely) however I'd love to snag that conversion from you. Please drop me a line, I don't have much I could offer in trade but I'm sure we can work something out. Thanks!
  17. Thanks guys, I have the Frems kit already, just need to add the conversion set. I've talked with Dave Locheed quite a bit, he sold these molds to Black Robin Resinz in New Zealand. Unfortunately the gentleman who was Black Robin passed away and his family has since thrown out the molds and masters. I know Dave wants to get hold of a CT-4 kit so that he can re-master the kit from his original parts and offer the kit for sale again
  18. Thank you all for the assistance in finding the Kiwi Models aermacchi and skyhawk conversions! I'm also seeking the following kits and I'm hoping someone has one they'd be willing to part with. All are in 1/48 scale: Red Bear Resins King Air 200 Kiwi Models CT-4 Airtrainer (any variant) Tigger Models P-3 Orion I'm in the Washington DC area, can pay with paypal, and will buy internationally (except possibly the P-3, postage costs on that would be outrageous) Thanks! Mike mikeswinburne@gmail.com
  19. Thanks Jeff, will consider that./ I've contacted revell about ordering the parts i need and if they decline the request then I'll go find that turret somewhere else!
  20. More sold stuff removed, plus a ton of new additions and price drops. Thanks folks!
  21. Hi all, does anyone have all of the turret parts for a Revell PV-1 Ventura that they'd be willing to part with? I need all turret parts including glazing and the fuselage insert. I can offer up a complete (unstarted, of course) turret assembly from the RAF Ventura boxing in trade if needed. Please PM or email me if you can help - mikeswinburne@gmail.com Thanks!
  22. Thanks to everyone who has claimed some of this stuff so far! List is updated with sold items removed
  23. Hi all, I've got a few items i want to part with and a few items i want to get my hands on. Some of the wants are rare so any and all leads on where I may find them are greatly appreciated! Update Sept 23: Any price adjustments on older listings are in red text If buying - paypal preferred, postage not included in these costs. Shipping from Washington DC area, worldwide. Please message me on here or email me at mikeswinburne (at) gmail.com. Thanks for looking! Wants list (all is 1/48 scale) Kiwi Models Aermacchi 339CB conversion Kiwi Models A-4K conversion Kiwi Models CT-4 Airtrainer k
  24. Hi all, I'm in need of some specific parts from any release of the revel/monogram PBY-5A Catalina: the "Bug Eye" nose turret parts and the radome that sits above the cockpit. Does anyone have these parts they may be willing to part with (priority to the bugeye turret pieces) or available in a parts kit? I'd prefer not to buy a full PBY-5A kit just for these pieces. Please drop me a line if you can help, mikeswinburne@gmail.com Thanks! Mike
  25. Subject says it all, I'm selling my 1/32 meteor "stuff" as I found a few classic airframes ones at good prices recently in 1/48 scale. Please email me if interested at mikeswinburne (at) gmail.com. Paypal preferred, postage (worldwide) is additional and is at cost, no markups for packing/handling. Thanks for looking! Mike Combined, this equals $265 (combined retail = approx $310). Buy the whole lot for $250 + postage 1: HK Meteor F.4, unopened, includes the 1/144 meteor f.4 kit/decals as well. Asking $75 (retail at $84.99) 2: HK Meteor F.4, no 1/144 kit in this box, box is a bit scrunche
×
×
  • Create New...