Jump to content

le_boz

Members
  • Content Count

    533
  • Joined

  • Last visited

Everything posted by le_boz

  1. Hi Fellow modellers, I just released the video of my last SAS MD80 from Minicraft with decals from Liveries unlimited. Beautiful kit and decals to work with. Enjoy the show.
  2. Hi Fellow, Modellers, I just finished this A320 from Revell. Just out of the box. I used some aftermarket decals from Brazdecal for the "Raptor Livery of Air Canada. Due to the size of those decals I was unable to remove some of the wrinkles. Enjoy the show and modeling,
  3. Good Idea, I will give it a try next time, Cheers
  4. Hi fellow modellers, Here is the last video of my rescued Revell A310. I initially tried an Air Djibouti, but the decals were so old that they broke apart. I then used the 26 decals with the Sata Azores livery. I also had to change the engines set with a Braz model one. I hope you will enjoy the show, Cheers,
  5. Honestly, it is a bit time consuming to get the the wings at the correct size, but it is more affordable than the Eastern Express which is almost 100 USD... and I was quite happy with the result ;-)) It was an enjoyable build. Cheers
  6. Hi fellow modellers, Here is the video of my last build. A welsh model 747SP with some 26 decals of Air Mauritius livery. Enjoy the show, and happy modelling,
  7. Hi Fellow modellers, Here is my new build. I used the Airfix kit with some improvement for the cockpit made by Pavla resin kit, and some after market decals from MatterhornCircle. The video has complete kit review with resin kit and decals. Enjoy the video
  8. indeed, I will also build the Tomcat from the same batch in while. Glad you enjoyed it 😉
  9. Hi Fellow modellers, Here is my last build from an old kit of the F-111 from Hasegawa, I hope you will enjoy the build.
  10. Sure, and put some pic of your progress, we will be monitoring, and will try to coach you 😉
  11. Sure, but the issue is that you may have some paint remain where you have to put glue, so this will melt and do more mess on you model. To get the best result (for me ) is start the build fuselage, wings and engines, then when gap are filled, I paint the model, then do the finition gear, gear door, etc...
  12. OK, so what you can do is not putting the windows on you kit build the fuselage, paint it, then fill the window with micro Cristal clear. It look like a white glue, but it will become transparent when dry.
  13. If you want a suggestion, sand the paint down and build you kit, then apply the paint with the spray, you will avoid to show the separation between the half of the fuselage, but to fill the gap you will need some putty as well, do you have some ? Cheers
  14. Hi and welcome to our site. For the paint ideally you should sand it down and restart it. I recently experienced a similar the same issues when relocating some of my model were barely damaged. You can follow some of my building video but they are on fast mode but you should be able to learn a few tricks from other modellers. We will help you in any case. One more question for your paint, will you use a paint brush or a air brush ? this will make a significant difference in the final result of your model. Here is the link on the the restauration 😉
  15. And here is finally part 2 of the video, Enjoy the show...
  16. Hi fellow modellers, I just finished my last beast. A Dragon 747-4 cutaway, and I used the decals provided by Revell for the Iron Maiden World tour. The part 1 is mainly about the kit review and interior build. I hope you will enjoy the show.
  17. Hi Fellow modellers, Here is my last build. A 1/144 DC-7 from Roden. I used F-Dcal after market decals for a Panagra livery. I hope you enjoy the kit review and build. Happy modelling
  18. Impressive work Tom, Thanks for sharing. I also really like this Delta scheme Look forward to see the progress
  19. Hi all, Here is a small video where I did improve the Minicraft kit, by carving the APU door, and adding some details to the landing gear. I hope you will enjoy this.
  20. Impressive work there ! Thanks for sharing those hard line with us, some inexperienced modeller would have some trouble here 😉 Keep posting, I really enjoy your build
  21. Hi fellow modellers, I recently moved again, and most of my models, were taken such a good care that most of them were damaged... Few years back I mod a 777-200 from Minicraft to a 777-3 from Emirates. This plane was barely damaged during the relocate, so I decided to rebuild it with some more details on the kit and a new colourful livery from 8a decal. I did 2 video, this one is about the all rebuild, the next ones will be on detailing some of the modification. I hope you will enjoy the show,
×
×
  • Create New...