Don923

Thanks Guys for all the great ideas.

Thanks Guys for the Good idea...

I made 2 different models that were from local Airmen, gave them to our local military museum. they wer egiven to the diretors grandson was what I was told.

I have many WWII models I built through out my lifetime, right markings paint, and I think pretty nice looking. I just found out I have stomach, and liver cancer, I am thinking ahead what will happen to my displays. Any ideas on where one could donate , or what to do with them?

My Dad was the engineer gunner aboard "Ladies Delight" when he was with the 394BG 584BS. Eli did decals for me in 1/72 many years ago, now I will have to follow up my 1/72 with this beautiful kit.

I used a large size moving cardboard box since the late 70's to store my models. I use the foam/plastic peanut shipping material, lay a layer down place my larges model shake the box until the peanuts swallow it up then place more peanuts and models until I fill the box, I have had as many as 17 models in the boxes, moved them all over the country stored them in a metal building outside in Louisiana for over 15 years at the longest time without opening the box. then when ready to open I lay an old shower curtain down and pour out the peanuts taking time to easy the models out when they appe

I think I too the engine from an old 1/72 curtiss hawk, or goshawk kit and placed on mine, but that was years ago anyway, one of the Navy's yellow wings.....

Why are you not using a P-40C since you are building a Flying tiger paint scheme, or is what you building a 23FG aircraft?

I have used DOT 3 brake fluid, it worked geat, since then They have changed US cars over to another type brake fluid, not sure about the new stuff, that was over 30 years ago I used DOT 3.

Yes it is mentioned in the heading 1/32 scale, but thanks for the information... Will be looking forward to the new release.

I have stopped on my build of my AT6/SNJ because I can not find a set of decals for the all yellow SNJ. I did the modification in front of the cockpit to change it to a SNJ. but not finding decals for a yellow Navy trainer, only the yellow wings, blue/gray, and or the Blue Angle Beetle Bomber.

sort of on the same subject what about the Kitty Hawk T6/SNJ I am having trouble finding Navy training squadron SNJ decals

I want be buying another Kitty Hawk, 1/32 after I get this one put together... Broke 3 of the 4 engine mount tubes trying to ether remove from the tree and or getting the mold injector remains off the tubes. Almost tossed the kit in the trash at that point. Now the enine mounts are very weak. hoping the cowl and the cowl ring will hold the engine in place, want be able to open the panels behine the engine. Will go back to my Tamiya 1/48 scales

What a great build!!!!! love the kit others should check it out..... I built mine up as a early 50's spray plane my rigging just did not look as good as with my old Lindy Stearman. Wish Monogram had included the fine stainless wires as the lindy kit did

LOL I must be the same vintage Gary...My Dad built the old Aurora kit esci he bult, then the 1/72 scale Revells came out I thought I had gone to heaven. The 1/48 scale Monoram was ok not anything special. I had more fun building the ERCI ESCL kit finding some good looking aftermarket R-2800 to replace the 14 cyl. engines ESCL had included in the kit. Will be 67 next month, been building since a teenager so like you I have seen it all.

Confused are those brass wheel covers, or mask to keep from getting paint on the wheels while you paint the tires. I am looking for wheels with wheel covers, never seen a T-s or SNJ without the covers, and I've seen plenty

Don't forget the Martin B-26 Marauder!!!!

Yep that second set has the wheel cover that is what I want. Now to find them here State side. Not sure I can order from the source you sent to me.

Yes great John, I do think those would be a better match I will go look for a set of them, I hope I don't have to buy a 1/32nd P-40 kit. but sometimes like in my R-1340 the kit is cheaper than the after market engine to buy

I thought of those too Tony, (thinking P-51C) and might just use those, but I was looking for a set with wheel covers.... Thinking maybe a set of P-47's might work. I really purchased the kit for the R-1340 and engine mounts to use on my Silver Wings 1/32nd scale Stearman kit that I wanted to build into a Bull Stearman crop-duster sprayer,But the kit looked so good I thought I would build it up to give to a friend who has a SNJ that has let me fly it cross country for him. I have already built a Bull Stearman in 1/48 using both the new Revell Stearman, and using the wheel set from the Revel

Does anybody know what after market tires and wheels are out there for the Kitty Hawk AT-6 I want something with wheel covers, and other than smooth tires that came with the kit..... Thanks

I too use the 3M Acryl blue,, there are times I delute it with lacquer thinner from thehardware store for jobs where I need it to flow into thin gaps. Don

before you buy look at the foredom power tools.

here is a list of known B-26's from the 322ndBG/394thBS. Not sure where this name fits in. I never heard my Dad mention it. Nor do I see it listed in any of the mission reports: 449 Bomb Squadron 322 Bomb Group No markings on tail PN- 41-17620 HANGAR QUEEN 41-17600 41-17669 41-18008 PN- VEE PACK IT 41-18210 PN-? TOBACCO ROAD/ PIECE-MAKER 41-18272 PN-Q/PN-D MURDER INC 41-18289 PN-W COLONEL REBEL 41-31591 41-31644 41-31655 PN- 41-31689 41-31693 41 31711 PN-W MYSTIC CREWE OF GASPARILLA 41-31729 PN- 41-31741 PN-N WINNIE DEE 1st Lt. Francis H

I usually buy a store brand of charco lighter at the local super market. It's a refined mineral spirit and is much cheaper. It will thin MM enamals also.