flanker76

Have a look here http://reddogmodels.blogspot.it/2012/11/132-ef-2000-revelltrumpeter-comparison.html

Hello to all of you!!!!to the link below http://s1342.beta.photobucket.com/user/starfighters/library/F-104%20nuclear%20strike You can have a look to mine F-104 in an asimmetrical nuclear strike,of the Italian Air force,of the early 60..it's a G model,and represent the faboulous 4-5 ,based at Grosseto Air base,in 1964. The plane non need presentation,everybody of you,more or less know the plane,for having built it,or simply because being aeronautical addict...YOU HAD TO KNOW the ONE-O_FOUR ;)/>/> This in particular was the first and only one,who entered service,and immatriculated,wi

Hi... There are zacto correction set for the intake and exuast part,regarding the cockpit,if i'm not wrong,there is only for the single seat,and not for the twin,not from aires,maybe black box.... There are eduard photo etched part,for the internal and external,i guess the external could be used for the twin seat too. Regarding the bang seat,you can take an aires seat....wich is very good,i used it for my flanker and i'm going to use it for the MIG 29 UB/GT too.... Have a nice day

Ciao!!!!grande come sempre... But what about your 104 twin seater?did you stop your building? Complimenti!!!!!

Ciao e complimenti.....bellissimi lavori e bel blog!!!!! Hello....many compliments and very nice jobs and beautiful blog!!!!!Added to favourite!!!

Hi to all of you.... I'm doing an italian IDS/ECR version...anyway,i din't find any useful information about it.... I guess with my handling skill,buckle and harness they will result as an insult to the whole model....better the sculpted one... By the way thank you...

Than you so much!!!!!

Hi to all of you.... I'm almost finishing an 1/32 Revell tornado,with an aires cockpit inside(very beautiful)... The problem is that,being the model almost finished,i had to deal with bang seat,especially the harness,belt buckle and so on . It's seems to me,they are quite complicated,to get completed,or the instructions are not too clear...they are a real pain in the *** for me... I halways dealt with harnesses already "casted in the resin seat",this is the first time i had to assemble photo etched parts like this... Does anyone of you, who already completed the model, and maybe took an

APPROVED!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Hi...o meglio ciao!!! Regarding decals you can check this one...begemot...i used begemot stencil for mine SU-27 1/32 and are superb in quality.. below the link for the 1/48 9-51 as you want http://begemotdecals.ru/showpos.php?lang=2&id=66 Have a look at the begemot page,unfortunately stenciling for the mig 29,are on design stage..

Thank you Zac!!!What a kind of enciclopedia!!!!!The world knowh how over russian planes... Thank's again!!!

Hi... Unfortunately i still haven't got the pics of the cockpit...for this version....but i'm trying to got it... Ask and it will be given, knock and it will be open...as someone told... If i got some pics i will give you an advice. Bye

HI... Found it...thanks to a fellow italian modeler.... For all of you who are doing/intended to do it in the future, below there is the link...with the exactly plane... http://walkarounds.airforce.ru/avia/rus/mig/mig-29ub/index.htm

Hi to all of you... I recently bought a Revell Mig-29 UB/GT 1/32 scale,decal inside are for 2 model,one german and one Russian,i would like to build the russian one,but i didn't find any pics of the real model,i found a lot mig-29 images over the net,but no one regarding this one in particular... If some of you already built it,and found interesting pics of this ,please will be so kind to give me some information where to pic up the same picture... Thank you in advance...

Hi... It's not a Piaggio...it's a G222,now updated as a C-27 Spartan.. COngratulation for your masterpiece....!!!!!!

Hi and congratulation for your beautiful plane,and me as italian,i appreciate a lot,an italian plane,overall because tornado is one of my fav.plane. I'm doing the same ,but with the camo scheme of the 80,in green gray camo,but i had a problem with the front windshield,wich is too narrow compared to the fuselage... Didi you encountered the same problem?And in case how did you solve it? Thanks in advance!!!!!

Hi....i had a problem with the canopy of their F-86 sabre 1/32,when opening the boxi found the canopy broken,i contacted pamatrade,wich distribute the italeri product and they sent me back a copy of it,pay-less and quickly. Below the address....there is the contact of italeri firm,that probably they will remind to pamatrade. I attached also the distributor fo italeri product in USA and Canada. Pama Trade s.r.l. Via Pradazzo 6/B 40012 Calderara di Reno (BO) tel +39 051 6466253 fax +39 051 6466272 http://www.pamatrade.com info@pamatrade.com Italeri Italeri S.p.A. via Pradazzo 6/b

Hi all I'm currently building an 1/32 Revell tornado,it will be,an ECR version,depicting an Italian 50 Stormo(wings)Tornado. The box is for a German ECR for the tigermeet,with special livery. Due to the fact the German ECR use only one BOZ pod,and the box contain only one of it,i casted in resin. The final product it's very nice,the only things to do,it's to cut a few millimeter of the tail,and glue in the opposite side..reversing,because the BOZ contained in the box is for the right wing pilon,so the flare dispenser are orientated to the external right side of the plane. This is not to h

Ciao Maurizio. Che fine ha fatto il 104 biposto? Bello il tornado...puoi postare qualche foto del soggetto?Io ne ho cominciato uno in 32 della revell...sono ai seggiolini eiettabili.... Complimenti anche per i variegati titoli e i soggetti che trattano i tuoi libri, che spaziano dall'aeronautica a teorie complottistiche..vedi D.Icke.. ;) ;) A presto!!!!!

hi... I don't know wheter it will come out,early or after that rather than those.... Sorry!!!the "insider" wich told me that, doesn't told me anything more nor les than what i wrote. That's all,at least fot the moment. But he is a realble person,and if he state that,i can believe it. Let's see.!!!!!!!!!!!!! bye

Ho to all of you. I well informated person of my model club,wich is deep inside "model world",told that italeri sold to trumpeter the mold they did,in fact,seems the job was not completely finished,and tehy prefer to drop it,seems for a matter of raisisng cost. So it will be trumpeter to release a new F-104 in the early future ,based on the italeri mold.

Ciao Maurizio. Me too i'm an italian modeler from Milano,and i'm doing the "spillone",in 1/32, Hasegawa. Regarding theTrue detail tub,i encountered a lot of problem in find out the right fitting position between the 2 halves. Did you encountered the same? I didn't have a good opinion of these aftermarket part,the C2 lockeed seat was nice,and all the rest of the part of the kit were nicely done....but the fitting!!!!! Let me know!!!

Good morning.. Than you for your info. But if i had be sincere,it was this topics that i've read about 1 year ago,wich gave me the inspiration to do it,but i didn't liked the final result.... I was hoping that someone else could give me something better tecnique. Thank you all the way.

If you'll find this article it will be really appreciated.... Thank you!!!!!

Good idea to use a kleenex,but it's in 1/32 scale... the para braker of sukhoy are something like a kinfd of a "cross section"and putting 2 kleenex or whatever,the 2 layer would form a thicker part that would be clearly visible in the intersection. Any way thank you for your ideas..!!!!!!!!!