Jump to content


  • Content Count

  • Joined

  • Last visited

Everything posted by mawz

  1. Combination of both of those, Testor's completely missing the birth of the Miniatures market (where Vallejo for example is a major player) and the desire for acrylic paints that spray well (MM Acryl is not competitive in terms of its spraying & adhesive qualities) as well as the relatively recent boom in Laquer paints as an alternative to both enamel and acrylic paints. Testors also tried to get out of the Model RR market, and shot themselves in the foot doing so (yeah, the paint market for MRR crashed with the move to mostly RTR models, but Floquil & Polyscale owned what was left
  2. Model Railroader Magazine reported the following this morning: Seeking information about the status of the status of several of Testors long-standing paint lines, we have received the following from Vince Pierri, Senior Manager, PR & Corporate Communications for Rust-Oleum: “With a long history of producing quality hobby kits and supplies, we are evolving our strategy to focus more keenly on Testors, our flagship brand. To that end, we are discontinuing our PACTRA, AZTEK, and Model Master brands as demand for these products continues to decline. We will continue to support th
  3. The Demo birds are typically rotated through the higher-time single-seat airframes in RCAF inventory. Considering that the Aussie aircraft will be 1/4 of the operational single seat fleet, it's a given that they will end up as demo birds at some point.
  4. None of which applies to the ex-Australian RCAF birds, which will assuredly get used for a yearly demo scheme and were what Colin and I were discussing.
  5. And at some point no doubt one or more of them will get an annual demo scheme, which is what I was referring to.
  6. One of the two variants worked. The other one, arguably the more important of the two, was a dismal failure and only the ability of Grumman to deliver an entirely new airframe wrapped around the same engines and weapons system in fairly short measure offset that failure.
  7. The standard pods are normally carried in place of one of the two fuselage-mounted AIM-120C's, by going with the tank mount the aircraft can carry a full set of air to air missiles. The IRST is normally used for BVR air target acquisition.
  8. No, they currently operate Hawks, Alpha Jets, MiG-29's and L-59's
  9. The company provides Aggressors to the USAF.
  10. If you want some cool paint schemes on ex-Aussie Hornets just wait, the RCAF bought 25 of them and no doubt will do some sort of heritage theme around that.
  11. I'll freely admit that as a modeler, I'd rather build F-4's than F-22's. Boring grey jets are not my thing. But the F-22 as an aircraft is a real beast. Note that some F-4's were PGM capable since 1969, modern US PGM's are developments of the PAVE KNIFE program on the F-4 and A-6 which pioneered the use of LGB's in combat.
  12. Very nice build. As to the decals, the key to getting Airfix decals to bed down in my experience is liberal applications of Walther's Solvaset. It's a LOT hotter than Microsol and will bed down the most stubborn of decals (even old Tamiya ones). But it will also craze paint/glosscote if not careful, so be sure to test your paint/gloss combo before use on a real model. Solvaset is available from most model railroad sources, as Walther's is a big US model railroad supply.
  13. If you want to understand how Eduard got so big so quick, look at what the primary business of each of the big manufacturers is: Academy: Plastic Mold production Tamiya: RC Cars Hasegawa: Anime-related models (Gundam, etc) Airfix: Model Trains (Hornby) Eduard: Model Airplanes Revell: RC planes (under Hobbico until 2018) Revell of Germany: RC toys Trumpeter/HobbyBoss: Plastic models As is readily apparent, only 3 of the big names are doing plastic scale models as their primary business, and of those 3 only Eduard concentrates on airplanes. Not surprising that the c
  14. Payload is lower on the F-4 (F-22 is capable of a little over 22,000lbs max payload if all 4 external pylons are used, vs 18,650 for an F-4E) although the operational loads on an F-4 for strike are definitely higher as the F-22 has limited internal storage and rarely, if ever, operates with weapons externally. That's only in the strike role of course, air to air loads are basically identical (up to 8 AAM's normally, with 4+4 AIM-7+AIM9 for the F-4 and any mix of AIM-9X and AIM-120C for the F-22, although 6 AIM-120C's and 2 AIM-9X's would be typical) Range is also lower for the F-4, in pre
  15. In terms of structure, I'd bet on the F-22's being significantly stronger in fact. They're very similarly sized aircraft (the F-22 is ~1' shorter but has 6' more span) and the F-22 weighs around 12,000lbs more when empty. Some of that is the much larger engines and larger internal volume, but some is structure as well. And the F-22 is also stealthed from an IR perspective, one major reason for the design of its exhausts is reducing IR signature, and the leading edge design is also around that (it's actively cooled on the F-22), there's also a layer of undercoat on the paint which reduces
  16. Pretty sure that's not true, in terms of the official specs, the F-22 is listed as marginally faster, capable of Mach 2.25 vs the F-4's listed top speed of Mach 2.23. Now actual measured is hard to compare, as while we have good numbers for the F-4 from its career setting records (with a proven max speed on a closed course of 1604mph), no equivalent activity has been done with the F-22. The reality is that both aircraft share the same basic speed limits, which are airframe heating from air friction and air intake geometry limits, otherwise the F-22 in particular would be much faster on sh
  17. And Pic's! Theater markings going on the Fujimi. Needs a second coat and then it's gloss + decals. And I just need to finish up the tail (which needs a bit of RLM81) and paint the inner crosses on the fuselage & upper wings as Hasegawa was cheap and expects you to paint the inside section and trim the decals.
  18. Some of their reboxes are mediocre kits with really nice bits added. The Kinetic F-16 reboxes come to mind there. Eduard is limited in what molds are available to rebox.
  19. No idea what the boxing is, but what the Finn's actually flew were a Type 18 (VH-201, recoded to VH-21) that actually ended up in Germany, and a Type 6 (IR-101) They also had a few UTI's but only one was flown, which was coded VH-22 and later UT-1
  20. Probably the RS Models F or G is your best bet. The F & G differ only internally.
  21. Pics to come tomorrow, fixed the Fujimi scheme today, it had accidentally got hit with some overspray from a P-39 I'm also working on. Then work on the Hasegawa. MMP's interpretation of RLM81 is a fairly olive dark green, and their 83 is a lighter and greener colour. Originally followed the callouts by RLM number from Hasegawa, backtracked because I was unsure of the split (mostly 83/75, a bit of 81 on the tail) and decided I wanted to stick with the callout, so I need to reshoot the 81. Then for the Hasegawa it's painting the inner crosses, as they are 83 and white rather than just
  22. Yeah, the Italeri Hornet does bring back some memories. Did one a few years back with leftover decals and armaments from an Academy CF-18 boxing (the Academy got one of the neat 433sq demo schemes)
  23. It's worth noting that Voodoo's only carried single drop tanks on operational sorties, the second tank was only used when ferrying. The reason is a little odd, at the speeds used on operational sorties, the extra tank didn't add any range, because it added as much fuel burn from drag as it did fuel. Ferry operations involved cruising at lower speed and the drag is speed-related, so the tank added a lot of range when ferrying. I've heard the related F3H Demon had the same issue.
  24. I wouldn't call it an ordeal, just a case of 'never trust a Vallejo official colour match', which I should have remembered because it's bit me before in the past (For example their Medium Sea Grey is US Neutral Grey, the paint is a good match for the latter colour, but MSG is a completely different colour and far lighter)
  • Create New...