ajcmac

I finished the interiors. I glued the two halves of the fuselage. Wells and doors of the landing gear. And, that's all. Regards ajcmac

F4DPhantomII Yes, I fill in panel lines. Regards ajcmac

I started painting. Interiors painted with Tamiya's XF-5. Doors and wells from the landing gear painted with the Tamiya XF-4. Regards ajcmac

I have this model of Tamiya since 2012. With changes in the area of my bench I lost at least two pieces. The propeller hub and the pitot tube. I decided to start building the model and go try to find the missing pieces. The model. The chosen scheme will be of an airplane "A4" the 1º scheme of the sheet of the FAB (Brazilian Air Force) using a sheet of decals of the FCM. I started by gluing vertical drift to the fuselage. Best regards ajcmac

I have this model of Tamiya since 2012. With changes in the area of my bench I lost at least two pieces. The propeller hub and the pitot tube. I decided to start building the model and go try to find the missing pieces. The model. The chosen scheme will be of an airplane "A4" the 1º scheme of the sheet of the FAB (Brazilian Air Force) using a sheet of decals of the FCM. I started by gluing vertical drift to the fuselage. Best regards ajcmac

Thanks Joel :thumbsup:/> And after a long journey in the desert :angry:/> finally I finished putting the stencils. Regards ajcmac

Applied the clear gloss (Acqua Gloss Alclad). Before. Later. Regards ajcmac

Joel Thanks :thumbsup:/> . To paint the model follow the information of Eduard instruction sheet. Apparently is not correct and that I was informed. I found a photo and correct the error. Regards ajcmac

Thanks nicholassagan. Yes Exhhausted, all free hand. batana I always more two mixtures applied for each color. RLM 79 RLM 78 Regards ajcmac

And what I had more fear is already done :yahoo:/> . I think I can finally complete the UHU I have here at home still afraid of painting. Regards ajcmac

Thanks :thumbsup:/> :thumbsup:/> . Spad The joints are accurate. Everything fits perfectly. I only used putty at the bottom of the engine cowling at the entrance of the radiator. The fuselage did not use anything. Some care with the glue and did not need to use sandpaper. I painted the white stripe. All set for the last color RLM 80 Olive Green. Regards ajcmac

Joel No apologies and thanks for your comments :cheers:/> . RLM 79 ready. Regards ajcmac

Joel I do not use pre-shading but post shading. Paint the color and then apply lights and shadows. In RLM 79 the lights and shadows have not yet been applied. RLM 78 Lights and shadows. Where apply a color, in this case the RLM 78, make two mixtures. One for lights and one for the shadows. The two with about 80% of thinner. Now I will do the same for the RLM 79. Regards ajcmac

Thanks all! Painted RLM 79. I used the RLM 79 of Gunze. Regards ajcmac

I will not be the best person to talk mainly of German aircraft colors :blush:/>. As I know nothing of colors and, as a rule, follow the colors displayed on the instruction sheets. I used very blends made with Tamiya paints. Currently and for models of German airplanes use the Gunze colors. For the British continue with the Tamiya using the XF-81, 82 and 83. In this particular case I used mixtures of Tamiya because I could not buy the Gunze and no one seems to agree with the RLM 78 of Gunze. I use different mixtures taken usually the instruction sheets of Tamiya and others found on sever

Thanks nicholassagan . I started the weathering with the application of lights and shadows in RLM 78. Regards ajcmac

Thanks for your views and comments :thumbsup:/> . I started painting with RLM 78, a mixture of Tamiya paints. Also painted the propeller and the back of the driver's head. Regards ajcmac

Thanks jgrease :thumbsup:/> . Wells landing gear. Landing gear. Doors of the landing gear. Already with a wash matte clear. The wheel. Fuselage and wings glued. I'm putting the mask and glue the canopy to start painting the model. Regards ajcmac

chukw I see photos of your models and I'm always :jaw-dropping:/>. Regards ajcmac

Thanks nicholassagan The firebreak with the ammunition box. And after gluing the fuselage... it was the turn of the engine and stabilizers. I glued the air filter and painted the inside of the engine cowling. Regards ajcmac

Return to the bench. I finished the engine. Painted black, dry brush, a layer of gloss clear, put the engine number, a wash with Dark Brown. The deposit of oil. Finally graphite powder to give a metallic look. Here all complete unit. Regards ajcmac

And after the P-40 E and Typhoon has left the bench another model. Model that was started a long time and then stopped. Let's see if this is what comes to an end. The box. The version that I intend to build. What was done. Regards ajcmac

Another finished model. This time the Typhoon Italeri 1/48 rebox of Hasegawa. My first attempt at a D-Day model. Regards ajcmac

First I want to thank everyone for following and commenting :worship:/> . Andy As the Ichitoe said the procedure was identical when I applied Neutral Gray. The only difference is that in the green, for lights, mix yellow not white in the same proportions. The photos were missing, sorry :blush:/> , the finished model. Regards ajcmac

And after I glued the pieces of landing gear... ...I painted the doors and wells landing gear, landing gear and wheels. I used XF-22 Tamiya. The weathering. And for now is all. Regards ajcmac