Jump to content

zaxos345

Members
  • Content Count

    492
  • Joined

  • Last visited

Everything posted by zaxos345

  1. I am with Jmel, above!!!!!!! Great work John!!!!!!!!!!!!!! John
  2. Same...good...old... John!!! John (the other one! )
  3. Good to see you back John....great work as always!!! John
  4. You are crazy Jo!!!! Amazing job!!! John
  5. And the real thing, just to get an idea..... Thats all for now guys, hope you like it!!! John
  6. And finally i performed a dry fit in order to be sure that everything is in the right place and also to mark the places i have to glue them later. In the most inner detail you can see that i glued a disk where the engine with the exhaust pipe will sit. Another item i had to be sure that i would sit right and straight. ....
  7. .... Then i tried to scratch build the conical exhaust. For this i used this site which proved to be very helpful http://www.blocklaye...e-patterns.aspx So i printed the shape with the dimentions i wanted, made a pattern and i used the empty can of a beer to build it. ......
  8. .... Next it was the engine. The one that the kit offers is....... i did not like it so i started detailing it, first i cut of the conical shape in front and and shaved all the details leaving only the turbine blades. After that i started building my details....
  9. ... Next i started dealing with the internal structure in front of the turbine. I had to make 3 of those profiles the most inner one where the kits turbine is going to sit and the two others in front of it. .....
  10. Good evening guys, better late than never so here i am with another update, this time dealing with the back end of the model, turbine and exhaust area. But before going to this, i made the seat belts from tamiya tape. I did not want to use the photoedge ones as they were wrong. I only used the metallic buckles. I used tamiya tape because i wanted replicate the fabric effect on them. Hope i finally managed it. Then i started dealing with the back end and especially with the part of the fuselage surrounding the exhaust pipe. At the beginning i tried to correct the wrong oval shape of the
  11. Jennings look here at post #18 http://forum.largescaleplanes.com/index.php?showtopic=34601&hl=plagis&page=2 Hope that helps a little! (kudos to our loving friend Edgar) John
  12. Amazing build, overall, but the painting...!!!!!!! My compliments! John
  13. Thanks for the comments guys!!! Αντρέα, yes i have the zacto set, you can't build a decent A-7 without it!! I also have to find a way to correct the exhaust section!! Chuck, thanks for dropping by pal! Gianni, thanks mate!! John
  14. ... I added some Archer rivet (one by one with future!) Next with the dashboard... ...and i tried to give a third dimension on the I.P. And finally...the oxygen regulator So far so good lads, hope you like it :salute:/>/> :salute:/>/> John
  15. ... ...Some interior missing details or improvements... ...
  16. ... And i though i had come to the end...until i saw the ''office''. A lot off mistakes, even for a -E model! I had to remove and add some things in order to correct it for -H model! So before... And i started to remove and build... [ ....
  17. .... Next step the cushion of the survival kit. After 2 unfortunate attempts i finally came with something like that.. At the same time i tried to correct the parachute with milliput... and i added some major details that Aires did not provide... ...
×
×
  • Create New...