happy1

What scale Paul

Kale, I could possibly make you a set of paint masks, if your interested e-mail me at pgrivas@cox.net Paul

Tamiya hands down

Call Tamiya and get the missing part from them I've had to do it quite a few times. Paul

Master also makes a set with 2 20mm canons and 2 blank covers that I've used in at least 6 Tamiya Spitfire 1/32 scale builds that just slip in the holes line up perfectly or IIRC with 4 20mm canons check out Sprue Brothers site. Paul

Edgar my bad your right But testors 1110 med blue comes the closest to the Princess Elizabeth's blue proflie Paul

Painted Blue Nose 51'S in Britain were painted with Elisabeth Blue the closes that comes to that colour blue is Testors med blue gloss 1110. Paul

Use Testors 1/4 oz med blue gloss 1110, Paul

gregtarris, I'm sure glad that he came up with that offer because I don't have that decal set, Been looking all day for it for you but no joy. Sorry I couldn't help you. Paul

I need a little more information, I've got a bunch of Decals that I can and will look through d you have any kind of picture that you can show me what it is that you need will be more then happy to help if I can. Paul

what scale what model

dj you can also buy hypo needles from www.cmlsupply.com they make excellent machine gun barrels. Paul

dj you could avoided losing any detail by sanding, I use Mister surfacer to fill wing roots,I apply it with a brush in the gap wait a few minutes then use a Q-tip with Isopropyl Alcohol 91% works best to remove the excess Mr Surfacer, No sanding no detail loss. I've been using this procedure for about 5-6 years saves on a lot of extra work. Paul

dj go Spruebothers.com you can order Micro brass tubing or Nichole silver tubing get the slide fit package either brass or silver. Master Model makes fifty cal machine gun barrels in 1/48 scale that are just fabulous. Paul

What type of brush are we talking about ?? Please Paul

I told you She just wasn't another pretty face She's got Talent TOO!! Paul Real good work

What's wrong with what comes with the kit IIRC Blondie is fully dressed. Paul

Hmmm- never tried that

I just use leaguer thinner to thin Mr surfacer and use 99% to remove it the 91% to thin Timaya Acrylics tried to thin the Timaya with 99% once and got silly putty ended that mostly now I use home brew 2/3rds water 1/3 99% Alcohol works good also tried using nail polish remover on scrape plastic and didn't like it so I stuck to using Alcohol 99% removes it a little faster that's all. Paul

Who in the hell wanna cut paint after drinking that or even be able to see to be able to thin said paint or even find the damn stuff or even care about said paint or even remember what it was he was going to do in the first place or where he's at at the moment he's at now or anything else

If you live by a Safeway Market they carry it,... I Think but not really sure that denatured Alcohol is 99%. CAUTION DO NOT USE 99% ALCOHOL TO THIN ACRYLIC PAINTS IT WILL TURN IT INTO SILLY PUTTY!!!! ask me how I know.. go ahead ask me, well ask ask me

Try using Mr Surfacer 500 fill the seam using a brush to fill the seam let it setup for 5-10 minuets then with a q-tip and Isopropyl Alcohol remove the excess surfacer depending on how wide the gape is you may have to do this more then once as the saves aMr Surfacer will sink into the seam, 91% Alcohol works better then 70% but 99% works best if you can find it. Most important is that their is NO sanding involved at all thus no detail lost no re-scribbling involved been using this method since I found Mr Surfacer about 6 years I think try you'll like it saves a lot work. Paul

Naw he's just hard of hearing Paul

Anyone one will do I don' t think their was any one right formula when I was in we mixed our own by mixing yellow and black together it was hit and miss most of the time. Paul