ghatherly

https://spruebrothers.com/gtr48052-1-48-gt-resin-f-15-eagle-intake-set-gwh-kit/ This set will fit all 1/48 GWH F-15 kits currently issues and most likely future release. The set corrects the size and shape of the kit intakes that are too small, and allows the builder to use either of the three Fan sets supplied or the kit plastic engine. Set includes PW 100, 200/229, and GE intake engine fans.

https://spruebrothers.com/gtr48060-1-48-gt-resin-f-4g-phantom-ii-belly-strap-mng-kit-/

Making them now. Should be to SB by the end of next week if UPS cooperates.

Yes, We are making them next month for the Revell kit. The Tamiya intakes will not fit the reveal kit.

Hi Phil, Great question....YES!! Look for them in July at Sprue Brothers. Gary

Hi, Brand new in the box 1/32 scale of course. Beautiful kit!!! Located in US. $120 plus shipping. Will only Ship insured with tracking. Will Take Pay Pal or if in US Bank Check or Money Order. email or PM if any questions garyhatherly@gmail.com thx, Gary

Hi, Full length Seamless intakes for the Hasegawa Legacy Hornet kits: F/A-18A,B,C, & D kits. Now you can built these fantastic models with accurate intakes and fans. Very easy to install!!! https://store.spruebrothers.com/product_p/gtr48031.htm Also, 1/32 F-15 SG Decal set produced in conjunction with Miliverse models in Singapore. This set is designed to fit the Tamiya F-15E kits converted to the SG configuration using the GT Resin Conversion Set GTR32025. The GTR Conversion Set comes with all of the exterior antennas and parts, Detai

Sprue brothers ships to Europe. Before you say it costs more, yes it does a bit. Either individually or in bulk international shipping is an additional expense. I pay it too when buying outside the US. Hope you decide to give them a try. thx, Gary

A new concept, please take a look!

For Hobby Boss: Throw away the short intakes that come with the kit and use these economical, full length, seamless intakes with intake fan set. Intakes are a drop in installation and easy to install. Just clean, paint, and install as the directions indicate. https://store.spruebrothers.com/product_p/gtr48042.htm Same as above, only for the Kinetic Legacy Hornet Kits https://store.spruebrothers.com/product_p/gtr48030.htm Full intakes for the Hasegawa Legacy Hornets are being made now and will be at SB in a couple of weeks. Happy

Hi Fred, I would say it will been the next 12-18 months. I have an EA-18 planned to build and I won't be building the mock up until I build that kit. I am a one man show so It takes time to do the research and get new projects in the pipe line. Working on 1/32 A-10 item now, next is1/32 F-16 2 seat conversion for Tamiya kit, then on to Super Bug project. I do appreciate the interest and suggestions. Happy New Year!

yes, we currently make intakes for the 1/32 Trumpeter kits & 1/48 Hasegawa kits. https://store.spruebrothers.com/product_p/gtr32053.htm https://store.spruebrothers.com/product_p/gtr48032.htm https://store.spruebrothers.com/product_p/gtr48033.htm 1/32 Cockpits are planned but not anytime soon. thx for asking!

I do not know, and I don't have a Monogram kit to test. If you email me with the outside and inside dimensions of the pod, I can check that for you. garyhatherly@gtresinproducts.com thx

Hi, Some very requested products just in time for Christmas/Holiday giving. Drop me a PM or email with any questions! Merry Christmas and the very best of Holidays Seasons to all!! https://store.spruebrothers.com/category_s/2361.htm?searching=Y&sort=3&cat=2361&show=60&page=1&brand=GT Resin

1/32 scale intakes for the F-4 Tamiya kits restocked: USN 32001: https://store.spruebrothers.com/product_p/gtr32001.htm USAF 32002: https://store.spruebrothers.com/product_p/gtr32002.htm 1/48 F/A-18 SUPER BUG BASIC INTAKES 48033 : https://store.spruebrothers.com/product_p/gtr48033.htm 1/32 USAF F-4 OUTER WING PYLONS: https://store.spruebrothers.com/product_p/gtr32066.htm New Items: 1/48 Hasegawa F-16 NSI Intake Set: https://store.spruebrothers.com/product_p/gtr48025.htm 1/48 Hasegawa F-2 A&B Int

I just finished the tooling this week and making the molds. Look for them at Sprue Brothers by mid October.

GT Resin is please to announce to announce not one but two seamless intake options for the fantastic 1/48 Hasegawa F/A-18 E/F and EA-18G Kits. The first option is a full intake including exterior. Some cutting is required of the fuselage side panels. GTR 48032 The second option isA "BASIC" intake with the beak at the paint line, simplifying painting with the convenience being seamless. Other than removal of the pour strip, the intakes are drop in parts. GTR48033 GTR48032 is in s

HI, BY Popular Demand!! GTR48024. MCID intake conversion set for the Hasegawa F-16's will be arriving today. IT is a full intake tract with a GE fan face. Some reworking of the lower and man gear wheel well top side are required, but very straight forward installation. The set includes front Intake, rear Ducting, GE fan face, and Detailed instructions. The intake is made to use the Model kit heater vane and lights. The NSI intake For Hasegawa F-16's will be released sometime in Octob

The Bulls eye set is correct. ODS F-15's were still in the original two tone gray schemes with the early Stencils with you refer to as "HI-Viz". IN fact, many still had the original paint with the red-white-blue national insignia on them where as others had been replaced with the Black stenciled insignia. Just check your references. The low viz was part of the MOD eagle repaints after ODS. Here is a great reference link: https://www.cybermodeler.com/aircraft/f-15/f-15_all.shtml

Why is what I shared be an attack on Great Wall. I like their stuff a great deal and said nothin bad about them. What I shared is a flawed production approach that many of the new companies use. I am not going to make a list but I hardly think after 226 pages that his thread is a voice of support for AMK. For those of you who understand higher math, all CAD based software is mat driven. Creating complex curves in a program is exponentially more difficult than straight lines. Much of data that CAD programs show us in complex curved areas is guesswork on the part of the soft

Hey Mark, Yes, I know it is AMK, but the new 1/72 GWH F-14D that was just introduced has the same issue as this AMK thread has evolved. You misunderstand my point in that all of these new model companies use the same process and they all operate basically the same way. Since I am the writer is my fault for not being more clear.

I have been following things here on and off. After having been asked to consult on a future kit project by their US consultant, I understand now how they can make these serious errors. Almost all of their shape problems are in compound curve areas of the airframe. I declined because in a cursory, 5 minute review of the CAD drawings I found over 20 errors. These same error are exhibited in the line drawings of a popular publication, and in the conversation with the US consultant he explained to me their design process that relies exclusively on line drawings and photos. Essentially, their

Hi, Please come by the GTR Tables and say hello. I will have some new items in both scales for sale as well as many kits...cleaning out my stash. Jake Melampy will be with me at the GTR tables, which are located between Zoukei Mura and Wing Nut Wings tables. Hope to see everyone there! Gary

HI Dan, This week. They shipped the end of last week Thx GH

Dunlop does not make tires for the F-15. Your choices are Goodyear or Michelin, and the choice is yours unless you have a specific reference you are duplicating. Tires are not assigned like engines. With the GT Resin wheel set, you get your choice of both sizes of lightening holes for the main wheels in each set. The set also cones with the shimmy dampener.