-
Content Count
20 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Everything posted by aquatarkus10
-
Hi to all I propose this version of the Lockheed PV-1 Ventura completely covered in aluminum. (not historical) The model is that of the Revell / Monogram rather dated but has been accessorized with sets of Lone Star Models, Eduard PE, Brassin and Scale Aircraft Conversions. Finally I completely covered the model with the aluminum tape according to the MWP (Metal Work Panels) technique and this is the result:
-
Huges OH-6A "Cayuse" Da Nang Fragments - Dragon kit 1/35
aquatarkus10 replied to aquatarkus10's topic in Helicopter Modeling
Thanks to you for the comment and your time. George -
Huges OH-6A "Cayuse" Da Nang Fragments - Dragon kit 1/35
aquatarkus10 replied to aquatarkus10's topic in Helicopter Modeling
Hi midnight I did not want to ask you because I already imagined your observation but thanks anyway. Fortunately, they are small (and right) corrections that do not involve major changes and above all, because this is not the discussion dedicated to the Iroquois. Now I'm on the ground in convulsions 🤠😎! I'm kidding of course. Man,You are definitely named my personal helicopter consultant! George -
Hi Paul Once the panel is fixed, I simply use fine and ultrafine grain steel wool with weight '00 00' to remove small scratches, even involuntary marks that you can cause while working with the roller and I pass a bit of polish for metals (Iosso or Metaglan ) or abrasive paste (Arexon). MWP Procedure: aluminum tape w/film protection 1- We fix the panel, after having cloned it from the original, on a cutting mat 2 -We write on it all the information cloned from the original and, if necessary, w
-
Huges OH-6A "Cayuse" Da Nang Fragments - Dragon kit 1/35
aquatarkus10 replied to aquatarkus10's topic in Helicopter Modeling
Quiet, absolutely not and again I thank you also because, actually I checked and it is as you have reported me. Fortunately, I have already made the changes on the Iroquois and now I am more comfortable. While this is not the discussion on the Huey, here is a little revised and corrected preview. I hope you can provide me with other indications. Cheers George -
Huges OH-6A "Cayuse" Da Nang Fragments - Dragon kit 1/35
aquatarkus10 replied to aquatarkus10's topic in Helicopter Modeling
Thanks for the comment and especially for the clarification. There is always something to learn and I'm happy when someone teaches me things I didn't know. George -
Hi to all, I would like to share this model produced in 1/35 scale several years ago (about twenty) by Dragon for the 'Nam' series and in which I have always been interested: Huges OH-6A Cayuse nicknamed 'Loach' omni companion of the Bell Huey UH 1 -D "Iroquois" (but also of all the other versions present in the South East Asian theater). The version chosen is the E TROOP, 1/9 Cav, 1st Cav. (AM) Lai Khe, Vietnam 1970 and this work is part of a larger project that is nearing completion: 'American Chopper': As anticipated, the project (which will be available shortly) and call
-
Thank you for your comment and interest in this work and a technique used to make it. Surely the technique used to obtain the right oxidation / corrosion texture of aluminum, notoriously refractory to this process, is not simple but not impossible and now I will try to show you the path taken step by step to achieve this result: Procedura di ossidazione per " corrosione ": This is a very interesting procedure (at least personally) as with a few tricks and a lot of attention, it allows us to obtain a particular 'oxidized' texture useful for cont
-
Hi to all, This is a very particular work performed on a very dated kit (Monogram 1980 reboxed) with all the panels in positive! The project involved the complete rewriting of the panels and all the information contained. The model was equipped with accessories of detail and improvement of the canopies (3) of the Lone Star Models, of the trolleys of the Scale Aircraft Conversions, of the exhausts Aires as well as of scratch building of parts such as a General Electric J79-GE-5A turbojet. The model in question was completely covered with self-adhesive aluminum tape treated, oxidized
-
Hi to all Men, here is an owl that has finally spread its wings: this is the kit proposed a few years ago by the Great Wall Hobby in 1/48 scale. and some afttermarket: some shots from the wip: pit writing of the rivets gallery: Fw 189 A/2 (werk Nr. 2317, 5D + CH) Russia 1943 contextualization of the model:
-
Pacific WWII B-25 J " The Strafer" 1/32 HK model kit
aquatarkus10 replied to aquatarkus10's topic in The Display Case
Hi to all Thanks very much for your wonderful comments and your time. George -
Pacific WWII B-25 J " The Strafer" 1/32 HK model kit
aquatarkus10 posted a topic in The Display Case
Hi to all I present the B-25 J Mitchell " The Strafer" by Hong Kong Models 1/32 in MPW (Metal Work Panels) version (real metal coated) this is the operating version chosen (optional): North American B-25 J Mitchell "Lady Lil" (correct nose for this version ) Hong Kong Models kit 1/32 scale model - version: 498thBs "Falcons", 345bth Bomber Group " Air Apaches" 5th AF in Philippines, May 1945: image posted for exclusive technical and historical reference The model was entirely covered with self-adhesive aluminum tap -
MWP project : Mirage IIIc "Ça va sans dire !" 1/32
aquatarkus10 replied to aquatarkus10's topic in The Display Case
Thank you all for your interest in the MWP metal coating technique As for the teaching of how to correctly perform the technique, I am trying to make a small but essential tutorial video that I will publish on my website. Meanwhile, you can find some excellent indications & samples on this page: https://www.adventurephotomodels.com/metal-work-panels/ another mwp model sample : Lockeed/Canadair CF 104G 417°SQN Cold Lake Alberta late 1970 - Italeri kit 1/32 scale model -
MWP project : Mirage IIIc "Ça va sans dire !" 1/32
aquatarkus10 replied to aquatarkus10's topic in The Display Case
Tanks for the comment I've aprecieted very much . I entered an icorrect link and now correct it. Thank for the tip. George -
Hi to all I present to you my latest work carried out with the complete aluminum coating technique (self-adhesive tape) of the Mirage IIIc model based on the Italeri kit in 1/32 scale and performed with the MWP https://www.adventurephotomodels.com/metal-work-panels/technique: DATA SHEET kit: Italeri N. 2505 - Dassault Mirage IIIc - production 2013 - 1/32 aftermarket : Eduard BigEd Part I : Remove before Flight - interior -seatbelts
-
Hi Steve I mistakenly opened a topic (MWP Project Mirage IIIc) in the wrong section of the Display Case (armor instead aircraft). What can I do? Do I have to repeat everything in the Aircraft models section? Thanks for the help and good day aquatarkus10 George
-
this topic has been incorrectly posted in the wrong section and therefore been removed. Sorry for the inconvenience aquatarkus 10
-
Hi Sebastjian Thank you for your appreciation. I try to answer your questions: The exhausts were made in emulation VTC mechanism and can be positioned as the real ones. The nose is not absolutely Academy as incorrect. The cone has been supplied with the set of WindMark and that is correct Cy37. in the photo below, you can see the difference with the cone of QuickBoost for Su27b and the one next in clear resin of WindMark The closure of the parachute braking is not repositionable. many greetings George
-
Hi to all I found a moment to prepare this small gallery on the set of conversion WindMark Su37F "Terminator" 1:48 Academy kit based I had to wait for the delivery of some accessories directly ordered in Ukraine. I refer in particular to the taw bar and the cover intakes. for more info & pics :My link Thank you for watching this work very good model at all. George