ash74
-
Content Count
62 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Posts posted by ash74
-
-
Hello All
I am trying to build the Revell 1/32 Bundeswehr Luftwaffe UH-1D (SAR) 70+54 25th anniversary Alhorn 1984 bird. It has black/red & yellow stripes. It was a Revell kit (4440) I am wondering if anyone has a walkaround, particularly of the underneath? I have some photo's but some seem to create confusion not help it. Thanks
Ash
-
Hello
I have this kit too, I would love to have a go it one day, but I don't like painting white, however I am gaining confidence using Tamiya lacquer paints. I do like the coast guard helicopters. If you get a chance have a look at movie called "the Guardian" it has Kevin Costner & Ashton Kutcher in it (Don't let that put you off!!!) It's has some footage of these types of choppers, some inside. I look forward to seeing this built.
Ash
-
Hello
Minicraft have re-released it in 2017. If that helps? Thanks
Ash
-
Hello
Without seeing the complete instructions. The gradient could mean metallic finish? I am not sure whether the direction changes things? Thanks
Ash
-
Thankyou, I will keep an eye out for it. That's great to hear it will fit the Kinetic kit, as I bought one in anticipation for the decals (Hoping it was right) Thanks
Ash
-
Hello
Is there a release date for the 1/48 Hornet early years? & is the Kinetic F/A 18A the right Hornet to use these decals on? Thanks
Ash
-
You could try scalemates, they have visible 2.3 litre turbo engine, which looks like a re-box? You just search 1/3 in the instructions area. It should bring it up. Hope it helps? Ash
-
Thank you Gino, I wasn't to far off, but that's a great help.
Ash
-
Hello
Could anyone let me know what colours would be in the cockpit & cabin area in an early 80's white over grey scheme SH-60B ? I have seen gunship grey & flat black, but not convinced this correct? Thanks
Ash
-
Thank you Ray
That is a great help, I have the tails totally wrong, I wasn't to far along with the wings. Thank you for the help.
Ash
-
Hello All
I am hoping someone can help? I doing an old Airfix 747, I have Liveries unlimited 747 Inspar panels, but I have no instructions for it. I don't know if I have misplaced them or whether they where never there. I am hoping someone can guide me where the decals go? or where I can locate a set of instructions? Thanks
Ash
-
Hello
I might be completely wrong & it might be just that they are similar colours, but what about 1/48 scale either U2 or SR-71 pilots/crews, they look similar & may be passable with a few modifications? Not sure this helps? Thanks
Ash
-
Thank you
I will look into the decals. I am surprised no one has had a go at them. Thanks for the correcting me on the aircraft. I don't usual build airliners (White is hard to paint!!!) I going by what was mentioned in the movie, not what it actually is. You have helped a great deal. Thanks for the pictures & help
Ash
-
Hello All
I am seeing if anyone can shed light on whether there are decals for plane in the movie Airplane! (or flying high, for the aussies) Hope someone can help? Thanks
Ash
-
Hello
We loved Honolulu
Pacific air museum is great for being very interactive. The Missouri was a lot of fun too(So was the Bowfin, if your small!!!) There was an aquarium to north of the Island, but I cannot remember it's name, it was fun for something different, then military or vehicle related. We didn't have any bad experiences, even the homeless where nice. Take time to enjoy it. As for hobby shops, I did not find any, but I had a lack of knowledge being both the first time there & the first time overseas. However Pearl Harbour display gift shop has some models for sale, mostly related to Pearl Harbour & WW2, but you never know your luck, it has been 5 or 6 years since we have been, mores the pity!!!
Would go again in a heartbeat
Ash
-
Hello All
I am hoping to get some advice. I trying to build the 1/48 ICM RBT Foxbat. I am stuck on trying to get internal intakes built & attached. I have tried both the ICM way & Revell way with no success. Does anyone have any suggestions on how to get it accomplished? I am having trouble on where the initial intakes attach to the cockpit module, as well. Thanks
Ash
-
There are two books on Vietnam nose art, I think they are called Vietnam Helicopter nose art 1 & 2, by John Brennan. They are two of my favorite books!!!
Thanks
Ash
-
Hello
I am not sure if this helps? But Metro Hobbies in Australia have the Academy MH-53E. They are usually pretty good at keeping what's on line & what's in stock accurate. But if you have doubts. I am more then happy to have a look & confirm it's there. Hope this helps? Thanks
Ash
-
Hello Dlij60
I can help you with those instructions. I can send them electronically or photocopy them & post them. Happy with either. Let me know? thanks
Ash
-
It seems like the 1/48 Hasegawa AH-64D long bow "Iraq freedom" does but with picture provided I couldn't tell if this was the type you are after? it's definitely 1 cav though. Thanks
Ash
-
Hello All
You used to be able to get cross sections which would guide you to where some of mechanical items are placed. It would probably give you an idea what hatch to open & roughly what is underneath. Thanks
Ash
-
Hello
I can scan & send these too you, if you can wait for the weekend & let me know where too send them. Thanks
Ashleigh
-
Hello
I can scan and send the instructions if you want? I am not sure I can help you with the other items. Thanks
Ash
-
I am in need of some parts for a build I started some 20 years ago. I seem to have misplaced the clear parts and underwing stores. Instructions and kit decals would be a bonus also. Let me know if you can help!
UH-1D SAR
in Helicopter Modeling
Posted
Thank you Luca
I have the DF-helostuff decals, which has lead to my confusion. The photos I have seen, show no anti-glare nose & a white roof (I think?) The DF-helostuff instruction's show these. But you are right & maybe I can speak to David & see if he can guide me. Thanks
Ash