Aussie-Pete
Members-
Content Count
410 -
Joined
Content Type
Profiles
Forums
Calendar
Everything posted by Aussie-Pete
-
Here's the Fatman
-
https://www.buzzspacemodels.com/ Oli Braun. The reason I started in 3D modeling
-
Made or as a kit? The 1/24th is 5 inch The 1/12th is 10 inch
-
Hi Pete. Yeah it's all a max model. I printed it at 120mm tall. Flag and patches are just printed and glued. Gives it the material look. Dlp/sla allows great flexibility and only limited by your drawing abilities. There are plenty of free models but I draw my own too. This is my own model
-
I seem to have a thing for things that go boom. 8% full size
-
My rendition of. A Max Gruter model
-
Created in Fusion360 and printed on Photon DLP
-
Alternative to printing the inner that needs removing, you could try adding supports between the sides
-
Couple or resin cure tables https://www.kudo3d.com/recommended-printing-parameters-exposure-time-lifting-height-lifting-speed/ https://docs.google.com/spreadsheets/d/1crvzMnt_8NJXAsABinoIhcOjE8l3h7s0L82Zlh1vkL8/edit#gid=0
-
There is a photon group on facebook. Very helpful bunch of guys. Here are my settings for now and it works well so far. Also I'm not a fan of the auto supports. Sometimes they will interfere with the model. A mod many are doing inc myself after a troublesome weekend is to sand the build plate. Some sand off all the anodizing. I basically just levelled it with 1200grit wet dry. Just enough to smooth the plate and take any raised areas off. Mine feels like the bottom of a iron now.
-
I found a 3d model online. Can't remember where but a search should find it.
-
With this level of dwg skill why not go dlp and print the parts.
-
A large flat area should be tilted for that reason. Keep the raft larger than the surface contact area of the model.
-
I had quite some trouble over the weekend. I'm still not convinced tilting is required on DLP printers but the printer settings are more likely to impact. Exposure time for me is 6.5 Off time I think is 12 The raft is 1mm and use medium supports with medium contact points. I'll post settings I was given later. Otherwise a great piece of detail.
-
Here's 1 of my prints from the weekend. It's 1/60th free model from thingyverse Not sure where the designer got his details it's a little lacking but still possibly more detail than the Dragon F1 engine. If when complete it looks better I might replace all 5 with 1/72 versions. the bell dia is 60mm. Little too big for the Dragon
-
Just bought the same printer. Looking forward to printing some cool parts
-
SPACE X Falcon 1 drawings/photos - Help
Aussie-Pete replied to Aussie-Pete's topic in Real Space Modeling
Thanks for the thought. this is about the most detailed image I have found. It's what I have used to get to where I have for now. The rest I think might be some guessing -
SPACE X Falcon 1 drawings/photos - Help
Aussie-Pete replied to Aussie-Pete's topic in Real Space Modeling
So far but lacking much detail -
SPACE X Falcon 1 drawings/photos - Help
Aussie-Pete replied to Aussie-Pete's topic in Real Space Modeling
-
SPACE X Falcon 1 drawings/photos - Help
Aussie-Pete replied to Aussie-Pete's topic in Real Space Modeling
-
I am looking for detailed drawings of high res photos of the Falcon 1. These are like hens teeth to find. Does anyone know where I might find some. Some obscure website that I can't find? I am looking to do a printable well detailed 3D resin printed model. Thanks
-
Very cool
-
1/72 Shuttle and Hubble Space Telescope
Aussie-Pete replied to K2Pete's topic in Real Space Modeling
Awesome work -
Great move. I've been playing with fusion360 and contemplating the Resin printer. Was looking at the Maoi as an SLA over DLP Did you draw these parts?
-
1/72 Shuttle and Hubble Space Telescope
Aussie-Pete replied to K2Pete's topic in Real Space Modeling
Didnt have that much trouble with my beanie cap Looks great