ytsejam87
-
Content Count
263 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Posts posted by ytsejam87
-
-
5 hours ago, Gwen Phoenix said:
Anyone of you guys follow Growling Sidewinder on YouTube?
Are Lock-On and DCS related?
They are. Lock-On was a predecessor to DCS: https://en.wikipedia.org/wiki/Lock_On:_Modern_Air_Combat
Growling Sidewinder is a pretty cool channel. Grim Reapers is another. Plus, you can get some DCS info/gameplay from Ward Carroll and CW Lemoine.
-
What a beauty!
-
Can anyone offer suggestions on shipping kits across the USA?
Over the years I have been a bit too "optimistic", and eventually will be putting a part of my stash up for sale here.
I have been a buyer, but not a seller, so I know little if anything about shipping. Pros and cons of USPS, UPS. Sourcing Boxes...etc.
Any advice will be greatly appreciated.
-
https://replikator.club/2021/02/06/tamiya-paint-database-us-federal-standard-colours/
your mileage may vary.........
-
-
I love my HP-CS. To me, the ease of cleaning, due to the compression fit of the nozzle design is huge. I don't necessarily enjoy the "fiddly" super small threaded nozzles of most other air brushes.
Though, I must say, in hindsight, that I should have picked the HP-BS, as it does have that smaller cup. For some reason, I sometimes "look down the shaft" when painting fine lines. and the large cap sometimes gets in my sightline. Though, Dave's points about cup size above are quite valid. Currently, the HP-BS is ~$112 on amazon. I guess it depends on your style and use case.
-
It does seem to still be available from eduard.
https://www.eduard.com/Aircraft-and-helicopters/1-48/F-2A-1-48.html?cur=2
and
https://the48ers.com/f-2a-viper-zero-cockpit-detail-set.html
-
15 hours ago, VADM Fangschleister said:
Doesn't look to be, out of box. plus would seem to be a touch of scratch building for cables and connectors...etc. In a DCS video, the control unit looks to be on the right panel, behind the TACAN controls. I haven't seen a close up of the cockpit just yet to see if it is there.
-
G-man, are you handy with a jig saw, wood glue and drywall screws? maybe you can try your hand and do like I did, where I made my own. It was a fun little protect, DIY'ing allowed me to put in a more powerful fan. I did use MDF, so it is pretty heavy. I paper napkin'ed the dimensions for the air filter I wanted to use. I did have to hire a plumber to drill thru the foundation to mount a new dryer vent...... It isn't the most "beautiful" piece, but it works great, and IIRC, it was less than $100.00US for all of the materials.
-
My memory is fuzzy, but I remember from the late '70's early '80's Walt's hobby store on the ground level at Century III mall in the South Hills of Pittsburgh PA.
Walt even displayed my Tamiya A-10 in his window! I was so proud.....
-
California Air Tools for the win.
Durable, able to be worked on, and (if you get the aluminum tank) light weight.
Also, don't know if you perform car work or light house work, but this compressor is truly a "jack of all trades" for a good bit of "light" work.
-
perhaps these links can help:
https://ak-interactive.com/product/usaf-european-camo-colors-1980s/
and
https://www.reidairpublishing.com/decals/usaf-f-4e-gunfighter-phantoms 5th picture
and
https://www.cybermodeler.com/aircraft/f-4/f-4_profile08.shtml euro 1
and
https://www.cybermodeler.com/aircraft/a-10/a-10_profile01.shtml somewhat known as euro 2
i *think* the "other" green is fs34092.
-
3 minutes ago, Solo said:
That is something new for me. I have always heard that Academy decals are the worst and for every each of theirs kit I should by aftermarket decals. Hope you are right.
go to nachjager's YT url, and read the caption starting at 9:30 just for 15 seconds. At least with their a6m2b.
-
Andy does his typical sprue walkthru on a production kit
-
21 minutes ago, Janissary said:
I find their "tweak list" pages to be quite useful http://www.zone-five.net/forumdisplay.php?s=be53a6aa2258428210ac58a75caca21d&f=114
I concur.
-
Sweet!
you might like to repost in the appropriate forum yourself. Moderators time is nearly unobtainable recently here.
-
Check daves scalemates link below, he has listed what you are looking for!
-
Title says it all. looking for the f-16d arctic scheme portion from the twobobs 48-170 decal sheet.
thanks!
-
Look at Dave’s scalemates page, he has the test vipers sheet listed.
-
At least here in the USA, Revell has been a price based value leader. Sometimes one gets a gem like their F-22 and sometimes you get a clunker. I expect this will be under $20.00 at hobby lobby soon. I don’t think either GWH’s or academy’s excellent offerings would ever be available at that price.
-
I find it disappointing that Revell went the way they did with the stores. If we consider that they have a “standard stock” of weapons from earlier kits, I guess they forgot that they have had amraam’s in their F-16c kits since 2002 and AIM-9x’s since their F-18e kits since 2009.
Though, to be fair to Revell, the aim-7’s aren’t called out in the instructions. They even mark them as unused. However, the instructions do call out AIM-120’s in the paint and decal section.
Just a a bit of a head-scratcher that they chose this route. Just a few corrections, and it would have been a great kit, especially at the 25 Pound price point.
-
-
iirc, it was early boxings only. if you ordered the "kinetic gold" kit, you should be ok.
here is a link to scalemates for the original boxing.....https://www.scalemates.com/kits/kinetic-k48031-f-a-18c-hornet--956117.
Raymond from Luckymodel, might even chime in with specifics!!!!!
HTH.
-
Preorder from luckmodel: 39.99 usd
F-16 from Minibase
in Jet Modeling
Posted
I have the same problem.