n2h

Hello, I haven't done much due to recent moving and will do all my best to complete this project by end of this month. After studying these pictures, I am going to make 6 parts: 1) Upper bracket, 2) Lower bracket, 3) Bullet shell tray, 4) Column, 5) Base & 6) Chute. Upr bracket: I don't know the real dimensions, but my best estimate is that the width of the bracket is about 3 times wider than the cross section of the minigun. For its length, I think it is 4 times.The cross section of (1/48 scale) minigun is about 2mm, so I pick 6mm x 8mm for the bracket's overall dimensions. For th

Thanks guys. It took me about 6 mths to get to that point. Now is the time for the real show. Just tryout. You can see the 1/72 minigun from the kit seems too small (RT side.) My friend gave me his extra 1/48s (LT side) I extend the gun housing (?) Add electric drive assembly. Is it too big/long? See you next scene

Ammunition box, batteries... Made templates, printed out, glued to styrene sheet, cut out then sanded Let's take a break here, need go to my hangar....

Continue.. Fuselages Removed jumperdoors & cut below for Radiator unit To be continue..

I'd like first to show 20 pics of my "past" WIP of how to come up with the pilot seats, fuselagesand ammunition box. Then I will start making the miniguns & its pedestals,etc .... which will complete the chopper. First thing first: Taking a bath… There was no way to get any aftermarket kits (1/72 scale) for making a Gunship UH-1 nor were there instructions/WIP from the internet on how to make them. Thus, "Scratch Build!" was the best way to do. Pilot seats Made some samples of armor plates from paper then glued to thin styrene sheet for 1/72& 1/48 (not 1/35) Lef

Hello let_models. Thanks a lot. I'm in first with my 1/72 UH1H Gunship. Any objections?

Hello, I am newcomer and not sure which way to go: Navybase or Airbase! 1- Start RVN Navy Coastal Junk Force 1/48 Monogram1/48 Vietnam Command Junk as I got this "As is" kit from ebay long time ago. 2- Continue my incomplete project: 1/72 Italeri UH1H"Gunship" for VNAF. Zoom in