stusbke

All the best wishes from Belgium! Be safe and well in 2014, here's to a great 2014! Cheers Frederick Jacobs

and do you think that by doing so it won't go back to this state afterwards?? I too think its odd that its curled up where there's a mount of detail on the inside, hoping you can fix this bizarre warp! Cheers Fred

Well zacto I would urge you to send an email to them for me personally they have a perfect customer service as I had a broken and warped piece too and they replaced no costs attached what so ever! I would certainly give them a call and tell them about it! PS Can't wait till my package arrives...... and good luck with the su-33! looks great from where I'm sitting.... Cheers Frederick Jacobs

Here's another shout out for a 32nd scale release and I'm sure a few of the club I'm in will be likely to get your decals for the A-10 in 32nd scale! Cheers Frederick Jacobs

order just went in can't wait to put these to good use! Cheers.. Frederick Jacobs

Care to elaborate a bit more on that? It's looking great so far love the intake and engine fan great work Cheers Frederick Jacobs

looking forward to the results Cheers Frederick Jacobs

:woot.gif: :woot.gif: you have mail Greetz STB Frederick Jacobs

I bought from this dude as well but just the SH intakes and the Crusader intake both 1/32nd because lets face he's the first to pop m out. supper fast shipping indeed and its nice stuff clean cast and sturdy resin all out what's not to like? Greetz STB Frederick Jacobs

haha nice one buddy next one on the build list perhaps?? Cheers Fred

Looking great I'm now sad that I gut out and added fod covers to mine next one is definitely getting the aires treatment I just wish they made some wheel bays for this one. The fit of the nose section and aft section to my surprise was really good and needed extra care the fin however was a whole other story but yours seems to be better there as well, could be me though :unsure: Anyway thanx for the update Greetz STB Frederick Jacobs

*bumb* Thanx fiddler indeed the back end does look like it doesn't so I guess I'll start from there...would be great though if anyone knew more about it size wise and all Cheers Greetz STB Frederick Jacobs

Good tip on the MDC right click save as and store it under must do the same I'm glad to have you back with this one. I have a Q for you my friend would you think its wise to coat the cord first with future then glue it with future or just glue it with future without coating it? reason I ask as I fear the future will make my valleyo wet again your thoughts experience Cheers buddy Greetz STB Frederick Jacobs

Hi guys I'm gathering intell on Navy drone F4's :D and I have this picture here where they slung a rather cool looking device underneath it but I'm wondering if any of you may have some more pictures or info on it B) . the picture in question it looks like a baggage pod by its rear end but then the opening on the bottom front and the weird nose and what think is a dielectric panel kind of make me think otherwise... :huh: Anyway thanx in advance Greetz STB Frederick Jacobs

Nice I'm doing that one too, just using the Bb cockpit set and fod covering it all up. I had my decals drawn for me by a buddy of mine combining them with Tauro stencils what decals are these then, I had no idea these existed Cheers Greetz STB Frederick Jacobs

Well just throwing this out here maybe instead of tweaking the resin why don't you tweak the kit a little ?? A guy over at LSP had the same problem but solved it rather magnificent actually. Instead of counting the 3~4 mm your missing in the exhaust circle access instead you make the outer one (the kits back end) a tad smaller and the results look way more convincing... and less invasive to get there and to me the difference is hardly noticeable... here's the whole WIP if you're not keen on wadding through here's the pictures in Q Now I can live with this result but that's just my 0

;) this is great news buddy. Loving it, I can see why you just have to get in to this one mate and leave the F-14 on hold for a while, this will turn out beautiful. I'm looking forward to the rest of the build I just hope I can track a few of these bad boys down as I can't find them in our shops here . Cheers mate have fun ;) Greetz STB Frederick Jacobs

Hi guys here's my recently finished F-16B. This one was converted from the Tamiya kit from scratch, tail conversion from PWMP and the decals are all from Daco tail and belly fin decals where ALPS printed by Danny Coremans himself :wacko: if you want to read the whole shabang click here now on to the next viper .... Greetz STB Frederick Jacobs

so I guess you don't like the Wolfpack item then or did you secretly add some stuff to it inside the guts of this well?? I loved the hook updates buddy right click save as all the way, keep m coming I keep saving m... Cheers mate Greetz STB Frederick Jacobs

Looking **** buddy looking ****. I think that would be a wise idea to leave it like this for now and look at it agian when you're doing the final paint job. altough IMHO you would make some of the touch ups/repaints for CC more pronounced with a brighter shade of grey to even make it more weathered already. Cool tip on the clear parts mate will keep that in mind for when I start mine... Cheers Greetz STB Frederick Jacobs

hello my friend I can't be more awed then the next guy by these updates of yours. The thing that awes me the most is you paint all of these wires after you attach them and yet manage not to break or damage one of them I hope I get another chance to meet this model in person Cheers and happy rigging Greetz STB Frederick Jacobs

Looks great mate but about the last thing you said what would do if all wasn't attached sand it down/ thinner so the transparency would improve or something else, just checking for future reference Cheers mate Greetz STB Frederick Jacobs PS; I do hope you'll bring this to the UK nats this year so I can have a look at it :) so you can take gold/ best of show with you as well mate :lol: .

hi there have you looked at these available here look for item MST32028 HTH Cheers Greetz STB Frederick Jacobs

Hi there Geedub nice going so far I must ask you how you get to remove so much material without even breaking the piece :wacko: thing is you have more work because you're backdating it to an earlier version...but then agian its more fun :D I'm really looking forward to the work you're going to at the back end cavity below the canopy hump. Do you have a verlinden book as well as IICRC there was a verry close up picture of that area in there.... he's talking about the frame work he pointed out in this diagram... looking at the daco book I can see them too...nice catch another thing a

nice Pierre very nice, you have got the be the only person I know who would be able to pull such fine detail work off so clean and crisp. My hat's of to you sir. I'm looking forward to that rigging session its looking quite promising. Cheers and happy modelling Greetz STB Frederick Jacobs