Jump to content
ARC Discussion Forums

MikeC

Members
  • Content Count

    479
  • Joined

  • Last visited

Posts posted by MikeC


  1. Check these out - 48 TFW!!

    Thanks Phantom Phreak, that's a new sheet I think, it was on the Hannants news sheet this week, but I hadn't spotted it had a Liberty Wing bird. Mind you, that's France, I really want to do a Lakenheath-based one, given that I grew up in the area. Even our own Hannants/Xtradecal, who have covered the F-4D, F-111 and F-15E of the same wing, have afaik neglected the Hun.

    Thanks again


  2. They flew F-100s for some time in France and then from Lakenheath. I suppose the only way to be sure that a decal sheet covering this TFW is released is to finish mine using spare decals. They flew in both "colourful" and camouflage finishes, so please, someone out there, take pity. :bandhead2:


  3. Incidentally, following up that site, I came across this in the New Releases section of the same Airfix website: "70 th Anniversary of the Spitfire – 1:48 scale

    * New gift set (Airfix code 08679) scheduled for summer 06

    * A commemorative set to celebrate the 70 th anniversary of the first Spitfire. This set contains three Spitfires, including a NEW Mk I version, only available in this set, all in 1:48 scale. "

    A new Mk I in 1:48, I'm up for that. As for the other two, it has to be perm any two from Vb, Vc/Seafire, new IX (certainty?), 22/24 and Seafire 4x. My money's on the IX and the 22.


  4. Around the period you specify a matt natural metal seemed to be the common finish. I lived 11 miles from Mildenhall so saw plenty of them both at the annual open day and overhead every day.

    "... corrosion protective called Corogard. ... collected oil stains like a magnet."

    When I say natural metal, it could have been the Corogard. They could certainly look mucky.


  5. Hi Jfgesquire,

    I'm building a couple of Deuces at the moment. One is a Case XX wing, the other is the Pro-Modeller boxing of the Case X wing. Both clear sprues have part no 62 on them, two per sprue, but there is no reference that I could find (I've just looked) to part 62 in the Pro-Modeller instructions either. Part 62 seems to be some sort of light. Interesting, I hadn't spotted that, but they'll be useful spares box fodder.

    As for your last question, haven't a clue; was the majority of production Case X?

    HTH,

    Michael


  6. Question for all you USAF experts: some aircraft have/had the squadron designation on the port side of the fin, eg "493 TFS" on this F-111 on an Xtradecal sheet I have (http://www.hannants.co.uk/search/?FULL=X00648). However, on the starboard side it says not "493 TFS" but "493 AMU" - same number but different acronym. I've also seen a similar thing in the Hasegawa F-16B, so I don't think it was something unique to that subject.

    Whilst we probably all know what "TFS" means, can anyone tell me and the rest of the ARC community what "AMU" means in this context?

    TIA and Happy New Year,


  7. First apologies if this should be in the "airliners" section, but my reasoning was that this is a business or military communications aircraft rather than an airliner, so here I am.

    Anyway, I've just bought a Revell 1/48 Learjet as a change from my usual fare, and just started cutting plastic. Seems OK, parts seem to fit bar a slightly warped wing. Decals for two civilian (US and Canada) aircraft and two USAF C-21As. Only major problem is that if you're making the C-21As there should be an extra window to the rear of the four windows already there on the port side. On the starboard side there should be a corresponding one, but the frontmost window needs filling. That's a relatively simple cut-and-Clearfix/fill job.

    Anyone got further than I have and got any views? Also what is this kit's provenance? Original Revell or someone else's?

    Whilst I'm probably going to build the USAFE C-21A, there is one that tempts me more the more I think about it. Would this Finnish example be a radar reconnaissance version? http://www.airliners.net/open.file?id=9296...&next_id=925633

    Any more info on that appreciated too.

    TIA,


  8. When I'm doing a long session I keep an old paintbrush and a small pot of alcohol to remove any buildup from the tip. I add retarder (Cryla "Flow Enhancer") to most acrylics, including Tamiya. Always use Tamiya's own thinner with their paints, ditto Xtracylix (also good for handbrushing). I use a Badger 155, it's the same tip (I understand) as the 360 and one selling point was how well it worked with acrylics.

    HTH, welcome to house-and-spouse-friendly airbrushing. :cheers:


  9. I suspect you're right that it was borrowed from the Austrian AF - some of these aircraft went on a good while. I remember walking through London one day in about 1994 or 1995, looking up at an unusual noise, and there was a "Tante Ju" heading Southeast over the River. I think it was the one preserved by Lufthansa - anyone know if there are any others around still?


  10. What I do depends on what the real aircraft had. On those with conventional tailplane and elevator, I attach before painting, as there's usually a tailplane/fuselage joint to deal with. On those with an "all-flying" tailplane there is by definition a separation, and I often find it easier to paint first and attach afterwards (eg F-4 Phantom, A-7 Corsair II). However, ultimately, it depends on what suits you for the model you are building at the time.

    HTH,


  11. Thanks for your input guys. At least the kit fits real good together.

    Indeed it does. I enjoyed building mine, despite the raised panel lines. By the time it has a coat or two of GSB they make little difference - but then they don't particularly bother me anyway.

    I used the HVARs and mountings from a Hasegawa P-51, only real issue is working out exactly where they go.

    Look forward to seeing some pix of yours finished, enjoy the rest of it.


  12. According to an IPMS branch colleague who accosted the people on the Airfix stand at Yeovilton, it's descended from the old Vb via the Seafire IIIC, ie the VC wings and new fuselage etc etc.

    Looking forward to it.


  13. Thanks Mike, Ill check them out. I'd forgotten there was a J kit; may also find one at my local model show in two weeks time.

    BTW, for UK ARC-ers that's the IPMS Avon show, 21st August, Yate Leisure Centre near Bristol. See you there! ;)


  14. I was very interested to see the new Eagle Strike decals for an F-3, as one of the options has the name "Starize". This would make a lovely comparison with my model of the Alconbury-based RF-4C with the same name.

    http://www.hannants.co.uk/search/?FULL=ESP48204

    I've got the Italeri kit somewhere in the stash, but this has a solid nose. Does anyone know of an aftermarket glazed nose for same to enable the J variant?

    TIA


  15. I've tried both, and get best results with Tamiya's own thinner (no I do not have shares neither am I on the payroll). I also add a drop of Cryla "acrylic flow enhancer" (drying retarder).

    Ratios? I tend to go on "that's about right", depends on the colour.

    HTH

×
×
  • Create New...