kozlok
-
Content Count
523 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Posts posted by kozlok
-
-
List updated.
-
-
List updated
-
For Sale: List Below. Paypal (Gift option), Checks (hold to clear), Money Order, cash at buyer’s risk
Location: Florida, USA.
Shipping for kits at cost, International is at Buyer’s Risk, insurance required.
Some of the decals are rare and hard to find. I tried to price everything at a fair price.
E-Mail direct to kozlok1 AT gmail DOT com. I’ll try to check my PM’s, but e-mail is much easier for me.
Everything is 1/48 except the armor kits, which are 1/35
Thanks in advance!
Keith
KITS:
Hasegawa:
AV-8B Harrier II Plus #07228 No shrink wrap, bags sealed $25
***Also includes Free partial of TwoBobs 48-148 Jammin Jump Jets (VMA-311 & VMA-211 remain) Sold
HobbyBoss
A-10A Thunderbolt II #80323 No shrink wrap, bags sealed $55
Tamiya
Dornier DO335 A-12 Trainer #61076 No shrink wrap, bags sealed $25
Me262 A-2a with Kettenkraftrad $35
Academy:
F-16 A/C #1688 Factory shrink wrapped: $15
Accurate Miniatures
F-6B Tac Reece Mustang #480010 No shrink wrap, bags opened, all there $15
TBF/M Avenger #480120 No shrink wrap, bags sealed $30
Armor
Tamiya Panzer V Panther #35065 Factory sealed $15
Tamiya M106A1 #35116 No shrink wrap, bags sealed $20
DECALS (SS is for MicroScale/Superscale) Decals $2.50 Shipping, buy a bunch and save!
F-14 Tomcats
TwoBobs 48-101 Last of the Tomcats F-14 (partial) only VF-213 remains $15
Twobobs 48-097 F-14B VF-11 Last of the Tomcats 2 $20
TwoBobs 48-039 F-14B Red Rippin Muthas’ VF-11 $10
VFDecals 48-008 F-14D VF-31 Last Tomcat Cruise $30
Aeromaster 48-434 F-14 Anytime Babe Pt. 1 (partial sheet), only VF-2 #101 remains $5
EagleStrike 48-040 Tomcats Pt IV VF-124 VF-2 $10
SS 48-822 F-14D VF-31 (Black Tails) $10
SS 48-1044 F-14 A/D VF-41 VF-31 $10 sold
Repli-Scale 48-5013 F-14 Tomcat VF-194 High/Low vis $7
F/A 18 Legacy Hornets
TwoBobs 48-002 F/A-18A NSAWC Topgun Hornets (first issue) $15
TwoBobs 48-078 F/A18C Marauders $15
TwoBobs 48-073 F/A-18C SSHWF Golden Dragons VFA-192 $25
TwoBobs 48-091 F/A 18C Blue By You VFA-83 VFA-113 $8
TwoBobs 48-029 F/A 18C Fighting Redcocks VFA-22 $8
TwoBobs 48-030 F/A 18A VFA-97 Thoroughbred Warhawks $12
Eagle Strike 48-003 F/A-18C Honets of the Fleet Pt. II VFA-151 VFA-192 $15
Aeromaster 48-484 F/A 18 Stinging Hornets Pt. V VFA-27 VFA-204 $9
VFDecals/MAW 48-MAW001 Hornets VMF(AW)-224 -121 -533 $10
SS 48-894 F/A 18C VFA-105 VFA-136 $7
SS 48-1037 F/A 18A+ VMFA-115 $7
CuttingEdge CED48227 F/A 18C Hornet’s Revenge Pt. 1 (Christmas Grinch) $20
F/A 18 E/F Superhornets
TwoBobs 48-103 Rockin Rhinos F/A 18F VFA-11 VFA-106 $10
SS 48-1045 F/A 18F VFA-41 VFA-2 $7
SS 48-1046 F/A-18E/F VFA-27 VFA-11 $7
SS 48-1088 F/A 18 E/F VFA-32 VFA-115 $7
F-16
TwoBobs 48-076 F-16 C/D Lone Star Gunfighters $10
TwoBobs 48-131 F-16 Minute Men 50th Anniversary $15
F-15 Eagle
TwoBobs 48-130 F-15 A/B Sunshine State Eagles $5 Sold
Afterburner 48-006 F-15 East Coast Demo Eagles $10
F-4 Phantoms
Icarus 48005 F/Rf-4E Stencil Data – White $20
TwoBobs 48-113 No-Gun Shoguns RF-4C $10 Sold
TwoBobs 48-160 QF-4E Heritage Drones $8 Sold
SS 48-72 F-4VX-4 Bicentennial (F-4B), 57th FIS (F-4D) $18
SS 48-188 F-4J/S VMFA-115 VMA-333 low-vis $15
CAM 48-060 Phantoms Phorever F-4G $8
A/10
TwoBobs 48-065 A-10A Black Lightning Bolt II $20
Experts Choice 48-29 A-10As $5
A-4 Skyhawk
CAM 48-093 A-4F Heinemann’s Hot Rods VFA-164 VA-22 $12SOLD
CAM 48-043 A-4F Heinemann’s Hot Rods VMA-311 VA-192 $12
TwoBobs 48-017 Heinemann’s Hot Rods NFWS, VF-3 $20 Pending
Others:
SS 48-382 F-89D 76th FIS Only, no stencils (partial sheet) $5
SS 48-411 A-7E Desert Storm Corsairs VA-76 VA-46 $15
TwoBobs 48-014 F-5E Tiger II VFC-13 Desert Cats $25
-
The best bet for the Hasegawa F-14 is to refer back to Dave Aungst's build guide:
-
Well, the key difference is that when you lick an F-14, you get a furball, while with the F-18, you get welts on your tongue. That's really the important bit. All that other stuff, not so much.
-
I am re-decalling a "box scale" C-123 model for a pilot, and I need 1/72 tail codes in white, both the big letters and little numbers for the serial. Anyone know of a good source? I've already sent Caracal models an e-mail to find out how much he would charge to print them as a custom job, but I thought I'd check if there was a sheet of suitable sized letters.
The scale isn't exactly 1/72, but that's about as close as we'll get. I it scales out closer to 1/80, but whatever.
Thanks!
-
-
I want to do the Orange and Blue Indiana F-16 from Afterburner 48-058. Does anyone have a partial for sale/trade? Looks like AB is out of stock.
-
I want to do the Orange and Blue Indiana F-16 from Afterburner 48-058. Does anyone have a partial for sale/trade? Looks like AB is out of stock.
-
Can you post just a couple of little teasers for us?
Very cool!!
I just got walk arounds of the new CAG scheme and CO's jet, and got more coming this week!
I think I like the dk grey tailed line jets from 2006/2007 better though.
-
I saw a post that Caracal models will be doing a set in the very near future. I'm holding out for them.
KursadA is the man on that, maybe he can chime in here on his timing.
-
Almansur has the best pics I know of for that scheme:
-
Trade with warthoglvr with confidence. Andy helped me out with my latest project!
-
How's this look?
I layered a few sheets of thick plastic, sanded and puttied to blend. It's not perfect, but about the best my sculpting skill allows for. The antennas are all borrowed. One from an A-4, one from a Super Hornet.
I dremeled the bottom out to minimize sanding, then sanded it with a sheet of sandpaper on the Phantom's spine to shape.
-
It's beautiful. I really like the finish. Did you rescribe it?
-
Thanks for the kind compliments. The black is just model master gloss enamel, sanded between coats.
Bob, I didn't use the the travel pod markings, that's the regular fuel tank on the center, left gloss black. I'm still thinking I might buy a Hase F-16 someday and use the travel pod from that, and then it would be more correct.
One tip for anyone doing this bird, put the checkers on the bottom of the tail FIRST. I did mine last and didn't have enough room below the "Makos". I had to pull them and replace with new decals. Avoid my mistake!
Also, I painted the intake (inside and out) and put the checkers on the intake area before putting it on the model. It worked really well.
-
We traded Tamiya F-16 engines and intakes. He finished his end of the deal quickly. Trade with confidence.
-
As for Future, are you all referring to Future Floor Polish?
Yes, Future floor polish. They changed the name a few years back, but it's the same stuff (I think it's "Pledge with Future" now).
Read this:Link
and also Link
I use it as my only gloss coat. I airbrush it on, but it takes some getting used to to avoid putting too much on at once (it runs).
Like I said earlier, try the Testors gloss coat in the regular spray can (do it in a well ventilated place, that's a lacquer, which is bad for the brain cells!) wear a proper spray mask with active carbon cartridge filters (you can get it at Lowes or wherever)
-
Finished my 1/48 Tamiya with TwoBobs Makos decals. The kit and decals were a dream, my skills less so.
Decided to go completely clean on this one, as all the pics I've seen of this bird show it super clean. I decided to arm her to the teeth, though. One question, looking at pics of various GBU's and JDAMs, I saw severl pictures of each without the yellow stripes, so I went that way (I hate painting them). Does anyone know if this is common usage?
I did deviate from my references by adding a gloss black centerline tank, since I didn't have a travel pod. I'm thinking of putting the travel pod's decals on the centerline tank, but can't quite bring myself to do it.
Enjoy and comment as you will.
-
Look in the "tools & tips" section from the main ARC page. There are many how-to articles there! Kaan Gok has a nice one on weathering. Finescale Modeler is a paper magazine that often has tips on building, weathering, decaling, whatever.
Other thoughts: Avoid the F-14 until you have quite a few kits behind you. They are generally very hard to build.
Airbrushing is definitely a big step up in finishing. You really need one to do any kind of decent weathering. I like a gravity feed Iwata double-action (the paint cup is metal, and on top of the brush) like the revolution CR. Many people advise starting with a single action airbrush, but I'd just go for it, it's not that hard.
For decals, as has been mentioned, you must decal onto a gloss surface. Many of us airbrush Future Floor Polish. It's really a nice gloss, but you can use Testors gloss in the spray can, also. Finish with a coat of flat (again, Testors in the spray can). I think Tamiya has spray cans, also, but I'm not sure.
If you have an IPMS club in your area, go there for in-person help, and maybe make some friends too. Maybe even someone there will let you try their airbrush.
Keep building and ask us questions!
-
The QF-4's have a large, box shaped object (an antenna?) on the spine, just in front of the tail. Does anyone have close ups of the box?
Better yet, does anyone make one in resin?
http://images2.jetphotos.net/img/2/3/6/2/63889_1134125263.jpg
-
The ME410 is a fun build. Mine is one of my favorite kits ever. I got lucky and my mottled paint job is terrific. The big downer is masking the canopy, but nothing to do but buckle down and do it.
-
The aggressors kit comes with both intakes and exhausts. I built mine with the big mouth/GE, so if you need the small/Pratt, I'd be happy to swap you for a big intake/GE exhaust.
you can PM me, or e-mail at kozlok1 "at sign" hotmail "dot" com
I have some HARMS from my Hasegawa kits you can have as well.
Shadoweng Devilleader501 and SpitfireGuy
in Good Trader Alert
Posted
Shadoweng, Devilleader501 and SpitfireGuy all recently bought things from my stash clearing sale. Appreciate the business guys! Great Traders!