sin

I mean both. This kit quite expensive. Need to gather whatever available review before commit to buy.

Can't find much review online. Has anybody build this kit? is this kit good? http://www.scalemates.com/products/product.php?id=211207

Hi, Saw this finished model in the ARC gallery. After some search, unable to find any picture of the actual Israel F-16D block 40 in this marking. Just wonder, does anyone have any picture to share? Regards Sin

Hi friend, I'm working on the 1/72 Bangladesh MIG-29 using the Caracal Decals. The instruction suggest 2 of the blue color are FS35183 & FS35052. Any suggestion if using Mr color, which paint will be require for the mixture of FS35183 and FS35052? Regards Sin

Saw this manufacturer announced about the F-5F conversion kit. But till today have not seen it in the market. http://maquetasavm.blogspot.sg/search/label/F-5%20F%20Tigre%20III%20escala%201%2F72%20conversion%20AVM

Hi, Just wonder, beside the 1/72 F-5F produced by Italeri (out of production), is there any other manufacturers made the F-5F in 1/72? (kit or conversion kit) Regards Sin

Hi friends, Thanks for the tips. Will check them out. Thanks again Cheer Sin

Hi, Looking for 1/72 Sea King 6-blade tail rotor replacement kit to replace the Fujimi and Revell kit which contains only the 5-blade tail rotor. Any idea is there any manufacturer produce the 1/72 Sea King 6-blade tail rotor? Cheer Sin

Hi Guys Thanks for the information. But the way, what is the average cost of the 1/72 decal as it is not stated in the page. Regards Sin

Does anyone have any ideas about the quality of the Three Stars Decals from Greece? http://www.threestarsdecals.com/ Regards Sin

Hi, Need help. Just got the Felvo Decal 1/72 313 Squadron F-16A/B, F-16AM/BM. I am looking for a better picture of this Dutch F-16AM, J-624. Thank in advance. Regards Sin

Hi, Any idea when will be the releasing date for the 1/72 Revell F-16C "Tiger Meet" 2003? Here the link; http://www.revell.de/index.php?id=210&KGKANR=0&KGKOGP=10&KGSCHL=2&L=1&page=2&sort=0&nc=1&searchactive=&q=&SWO=&ARMAS4=&PHPSESSID=0ee523e68c68d3757b6883caf9ac1a64&KZSLPG=&offset=15&cmd=show&ARARTN=04669&sp=1 Regards Sin

Hi, Need help in the color on the Belgium F-16 Tigermeet 2009. In the Revell painting guide, it stated that the entire area is cover with gunship gray (FS36118) and small sector of the bottom is cover with light gray (from the front wheel door to the exhaust). Is this correct? In the picture of the actual aircraft, however it shows 3 type of gray instead of 2. What are the actual used on the plane? Front section Bottom view

Hi, Any idea when the Revell going to release the 1/72 F-16 Mlu "Tigermeet 2009"? http://www.revell.de/en/products/model_kit...=04691&sp=1 Regards Sin

Thanks SouthViper. i found the link by Mr. Paolo Maglio http://www.arcforums.com/forums/air/index....58&hl=italy f-16 adf&st=0 Regards Sin

Hi, Not sure anybody post this question before. I am looking for a close match for the RAL 7019 anthracite and RAL 7040 window gray painted on the Italian viper MM7251 with 90th anniversary paint scheme. http://www.f-16.net/gallery_item344636.html If using Gunze Sangyo Aqueous or Mr Color, which one will be the closer match? Thanks Sin

Hi, Need information on the Israel F-16C & D block 30. Does the F-16C/D have the bigger wheels with bulged in the gear doors and RWR "beer can" antennas? Does the entire F-16C use NSI small mouth air inlet instead of the MCID big mouth air inlet but with GE exhaust nozzle? Regards Sin

Hi, Saw this Chinese forum (Hong Kong) http://www.hkml.net/Discuz/viewthread.php?tid=115755 Is the Academy releasing the F-16I in 1/72? Any idea? Regards Sin

Great job ! You are a very resourceful modeler . Very impressive !

Tks for the note. Is there any aftermarket kit for the F-16E vertical stabilizer in 1/72? Regards Sin

Hi guys, Need help in the UAE F-16E. Just wonder is the vertical stabilizer base on the F-16E, bigger/wider than the normal F-16C? Regards Sin

I picked up the 1/72 AviationWorkshop CFTs and dorsal spine for my F-16i Sufa project. I'm using them to replace the IsraCast bits. The AW parts are SO MUCH BETTER!!! Great detail. I did a dry fit of the spine on my Revell F-16B. The link below is to the pics. The fit is spot on! I don't expect I'll need any filler. The part just drops right in place. And there are no resin pour blocks to cut off and sand. Trust me chaps, the stuff from AW is excellent. And it is reasonably priced to boot! Hi, Where to get the /72 AviationWorkshop CFTs and dorsal spine for my F-16i Sufa? :D

Just got the Zotz Italian F-XVI Vipers decal. Need help regarding about the two-tone grey for the F-16A ADF #MM7251 with 90th anniversary paint scheme. The instruction sheet show the two-tone grey as RAL7040 & RAL7019. RAL7040 is close to FS36375. If I use Gunze Sangyo Mr color or Aqueous color, which one will be close to RAL7019? http://www.f-16.net/gallery_item309347.html Thanks

Saw the following 1/72 F-16 upgrade set by Model Alliance in the Aviation Megastore webpage. Lockheed Martin F16 Fighting Falcon Conformal Fuel Tank x2 (Future release) http://www.aviationmegastore.com/?shopid=L...0&art=81634 F16 Avionics spine with parachute pack (Future release) http://www.aviationmegastore.com/?shopid=L...0&art=81636 F-16D Avionics spine (Israel Air Force) (Future release) http://www.aviationmegastore.com/?shopid=L...0&art=81635

Hi, Looking for the following 1/72 CMK conversion kit; 1) 7157 (1/72) F-16D Barak - conversion set for Academy 2) 7156 (1/72) F-16D Block 52+ EUROPE - conversion set for Academy 3) 7158 (1/72) F-16D SUFA - conversion set for Academy 4) 7159 (1/72) F-16C Conformal Fuel Tank - armament set for Hasegawa / Academy Anyone knows where to get it? Regards Sin