Jump to content

Modelkeenfan

Members
  • Content Count

    232
  • Joined

  • Last visited

Everything posted by Modelkeenfan

  1. Hi all I'm wanting a 1/32 Academy F16 two seat clear canopy (not the tinted one) from any of the academy two seat F16 kits. If anyone one has one to sell or swap, let me know. I have a lot of aftermarket sets if anyone is looking for something to do a swap. Cheers
  2. Hi all I have two 1/32 Academy F18 hornets and have both A/B tail fins and C/D tail fins. However I want to make one of the hornets into a F18B. I. Needing the following parts Two seat canopy Part i5 Part i2 Part i1 Does anyone have these parts they are Willi g to sell or swap for the parts to make a single seat F18A or F18C. If anyone is Willi g to do a swap, I will include an aired cockpit set and tail fins of your choice - either A/B tail fins or C/D tail fins. So if anyone can help, let me know. Cheers
  3. If anyone has a 1/32 F16CJ for sale, can you let me know. Cheers
  4. I am wanting the Tamiya F16 lightweighLanding gear which came out with the 1/32 F16C Thunderbirds kit. Or alternatively the aftermarket metal hasegawa F16 landing gear. If anyone has any to sell, let me know Cheers
  5. Hi all I am wanting to buy or swap a clear canopy from the 1/32 Academy F-16I SUFA kit. I am also happy to swap the canopy for the vacuform canopy out of the isracast F-16I SUFA Tamiya conversion kit. If anyone is interested let me know. Cheers
  6. Ok guys I need a 1 and /32 Tamiya F16CJ and my plan is to use the top half fuselage of the academy F-16I SUFA and attached it to the lower Tamiya F16 fuselage. I dry fitted it and it fits perfectly. The academy small mouth intake also fits perfectly. I cut out the engline cowling from the sufa lower fuselage and this too is a perfect fit. The prat and Whitney engine also fits well. So I just need a SUFA clear canopy and aset of lightweight landing gear which I think the aftermarket hasegawa landing gear should suffice. So I think a F16D block 32 s quite possible to make using the Tamiya
  7. Hi cag200. Thanks for the reply. But the canopy on eBay is a tinted canopy. I'm wanting the normal clear one. I have a SUFA vacuform canopy from the the isracast sufa conversion set but I'm not a fan of vacuform canopies. I'd be happy to swap the vacuform canopy for an academy clear sufa canopy. Sonic anyone wants to swap, let me know Cheers
  8. Hi cag200. Thanks for the reply. But the canopy on eBay is a tinted canopy. I'm wanting the normal clear one. I have a SUFA vacuform canopy from the the isracast sufa conversion set but I'm not a fan of vacuform canopies. I'd be happy to swap the vacuform canopy for an academy clear sufa canopy. Sonic anyone wants to swap, let me know Cheers
  9. Hi all I am wanting to buy a 1/32 Academy F-16I SUFA clear canopy. If anyone has one to sell, can you let me know. I live in France and I want to make a two Seat F-16 block 32 aggressor converting a 1/32 Tamiya F-16 CJ. So please if anyone has for sale, let me know. I would also be open to swap as well Cheers🌞
  10. Hi all Im looking for a set of Tamiya or academy 1/32 F16 lightweight Landing gear. Anyone has set to sell, let me know Cheers
  11. Hi all Im building a model of my Dad's Piper Cherokee 140. Im using thé minicraft 1/48 kit. I only ever do 1/32 military fast jets so dont have a lot of knowledge about parts ect in small scales. Thé model kit has spats (wheels covers) over all three wheels and m'y Dad's aircraft didnt have spats5. Thé wheels in thé kit are moulded with thé spats so thé wheels and spats are one piÚce on all three wheels. Does anyone have any ideas of what aftermarket wheels I could use in place of thé kit ones? Even 1/72 fighter aircraft wheels might work as not very Big. I would need a nose
  12. Hi Finn, You area legend my Man. On thé list of walkarounds, thé 2nd one on thé list has thé perfect picture on page 4. So shows no lip, its all smooth. So will now fill thé gap, sand it and all will bé smooth and a quick spray coat. As all would know as usual, good old Trumpeter make great detailed kits, but you use a tube of filler on every Trumpeter kit you build. So thanks again Finn. Great forum this one for warsaw pact aircraft. Always someone with knowledge or ideas on thé migs or sukhois. Cheers
  13. Hi all I am currently building a 1/32 Trumpeter SU25. I desperately need a good picture of thé front inside of thé jet air intakes. I want to know if its completely smooth or has the lip in thé front inside. Once you build thé engine as per thé instructions, there is a a lip inside thé immédiate front of thé air intake. Is that meant to bé there, or should it bé filled, then sanded completely smooth? Can anyone help? A good picture would bé perfect or if someone very knowledgable on thé SU25 could tell me. Any help most appréciated Cheers
  14. I recently bought a 1/32 Mig29A cockpit set for thé Revell kit from Stenka at cold war studios. Thé set is just awesome and one of thé best résin sets ive Seen. Thé customer service in answering emails and providing help with pictures and questions was fantastic. I highly recommend Stenka and cold war studio products to everyone. Great sets and great customer service. Mets see what New products Come Out from Stenka. I cant wait. A Big 5 stars
  15. Hi all Making thé SU25 1/32 frogfoot. I have Two reference Books - Squadron signal SU25 on action and Sukhoi SU25Frogfoot "Thé soviet unions tank buster" By Yefim GORDON. Both good référence Books but niether show any close up pictures of thé front of thé inside of thé jet intakes. Now my question is does thé front air intake have a recessessed lip around thé inside or is thé inside of thé intakes simply smooth and all flat. So Can anyone tell me if that is how it should bé, or should it be all smooth on thé inside. If anyone Can tell me, it would bé most appréciated and e
  16. Hi all I am making a 1/48 scale piper Cherokee 140 light aircraft for m'y father. M'y father owned one and was a full IFR instructor and taught me to also fly. M'y dad is 79 years old and i decided i would give him a nice gift for his birthday of thé Cherokee hé owned and flew. Flying was his passion. Thé Call sign of his aircrdaft was VH-CHF. So what i was needing is somone who could make thé decals for me. This would bé in plain white to fit 1/48 scale. I am able to suppy mixtures of thé aircraft so thé decals could bé made to scale. I would greatly appreciated if anyone
  17. I am making a 1/32 Mig-23 MLD flogger K however aires doesnt make à cockpit Set tu for this version. So thé research I have found is that all thé Mig-23 ML flogger G machines were all upgraded to Mig-23 MLD flogger Ks. So would using thé aires 1/32 Mig-23 ML flogger G cockpit set bé the closest cockpit set? If anyone can offer any light on this, that would bé great. Im not worried about any minute différences but as long as overall thé instrumentation and all are pretty much the same, thats fine. So can anyone with a good knowledge of thé Mig-23 ML or MLD let me know if Im right and if t
  18. Thanks for thé reply. I aassumed most sorties flown by thé mig23 would have been CAPS flying top cover for SU25s or mig27s. So I was thinking or putting on dual aphids and a couple or R23s. There were reports or mig23s downing Pakistani F16s with R23s but of course could never be confirmed. But dual aphids plus some rocket pods would also bé a cool loadout. I got thé Linden Hill Afghansti decals to use so Ill ses what I décidé. I welcome thé input.
  19. Hi all I'm after a 1/32 Aires F14D cockpit set and a pair of aires 1/32 F14D exhaust nozzles. I'm prepared to swap anything for them or buy them. So if anyone is looking for ai swap I have loads of spares or I will simply buy them. So if anyone is interested, let me know Cheers
  20. Hi all I'm wanting the following 1/32 Eduard F-14D interior set # 32707 If anyone has one to sell or swap, please let me know. Or I was wondering if the 1/32 F-14A Eduard Tamiya interior set would fit. Could anyone tell me? I'm wanting to make a F-14B bombcat. I'm also after the racks that attach to bombs to the under fuselage racks. These pieces come I'm the trumpeter F-14B and F-14D but are listed on the instructions as not used. These parts are W6 and W7 If anyone has these parts, I'm happy to buy them.o
  21. Thanks for the reply but I just found a decal sheet of the "grim reapers" son problem solved. Thanks again
  22. Hi all I'm after someone who can make decals. I'm wanting to do a Tomcat in the grim reapers markings in 1/32 scale. Is there anyone out there who can make custom made decals? If so, let me know Cheers
  23. Hi all Im wanting a F14A or F14B FLIR chin pod. I have a Trumpeter F14D and want to make it into a Ghost riders F14B. But i dont have thé F14B FLIR chin pod. Im wanting to make a Ghost riders F14B. Im willing to Swap thé F14D chin pod for thé F14A or F14B chin pod. Even thé Tamiya F14A chin pod would be fine. So if anyone can help me out, it would much appreciated it. If you Can help me out, reply to this Thread or send me a PM. Cheers
  24. Thanks for reply and great pics showing different schemes. I appreciate it.
×
×
  • Create New...