-
Content Count
22 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Everything posted by LooseSeal
-
Operation Gothic Serpent Aircraft references
LooseSeal replied to hawkwrench's topic in Helicopter Modeling
Would anyone happen to know where a feasible position would have been for the pilots to store their MP5s? -
Anyone working on a KH 1/35 MH-60L correction set?
LooseSeal replied to Dave Williams's topic in Helicopter Modeling
I'm sorry, but I think you've very clearly misread what I wrote, as I did in fact state the "fantastic research team". My point was that someone within KH themselves, whoever is in charge of actually choosing what goes on the spruces did make a mistake, at least far as that antenna goes. Any issue I have with the model has nothing to do with the research or accuracy. Again, I stated that it was a very good kit in terms of the actual model. What I said let it down was some of the engineering involved, which is not a new thing with KH. And I don't believe you had anything to do with -
Anyone working on a KH 1/35 MH-60L correction set?
LooseSeal replied to Dave Williams's topic in Helicopter Modeling
Yes, they're the same thing. Just get the Archer decals and you're set. The box art is actually a stock image which has been slightly altered (the door gunner has been changed to firing position) and not done in-house. The problem is that the OOB decals are for OGS, which means KH planned for that era of MH-60L but have made mistakes in not including what was clearly recommended by their (fantastic) research team. It isn't massively surprising, though. I've just finished assembling the engine/rotor housing and there have been some really questionable fittings -
Anyone working on a KH 1/35 MH-60L correction set?
LooseSeal replied to Dave Williams's topic in Helicopter Modeling
Thanks! It's more the specific placement of the ammo on that mission which I'm wondering about right now. I had read on a post from way, way back (I think intruder_bass's 2005 build) something about about ammo cans being suspended from the ceiling... which just sounds strange and very difficult to model! And how best to distribute 12 canisters through the cabin, whether they were allowed to be stacked on top of each other, etc, etc. -
Anyone working on a KH 1/35 MH-60L correction set?
LooseSeal replied to Dave Williams's topic in Helicopter Modeling
Just following up on the ammo cans - do we have any idea how they were fed into the gun? Ie: where were they exactly when in use? To the right of the gunner or positioned between the seats? Or just depends on the individual helicopter? Also, I guess there is a 'feed attachment' for whichever canister is in use. Anyone have an image of that? The aftermarket cans don't come with any, unfortunately. Thanks! -
Anyone working on a KH 1/35 MH-60L correction set?
LooseSeal replied to Dave Williams's topic in Helicopter Modeling
That is great! Thanks very much! -
Anyone working on a KH 1/35 MH-60L correction set?
LooseSeal replied to Dave Williams's topic in Helicopter Modeling
Thanks! I think the Legend set LF3D050 is far preferable to the Live Resin one. Comes with many more pieces, but still no decals for the side. -
Anyone working on a KH 1/35 MH-60L correction set?
LooseSeal replied to Dave Williams's topic in Helicopter Modeling
No, they did have them, as there are photos as you say. It's just a kit mistake unfortunately. -
Anyone working on a KH 1/35 MH-60L correction set?
LooseSeal replied to Dave Williams's topic in Helicopter Modeling
@Curt B I'm in a similar situation, but I've found a lot of what I'm looking for through various threads here and on other forums, as well as image searches and some furious Googling. There are some things I can't quite nail down, such as the floor armour, which I may have to sacrifice. For the things that have been listed here... the survival kits and water canisters, you can find good photos of them (and many other things) in this very useful thread: http://www.arcforums.com/forums/air/index.php?/topic/301695-operation-gothic-serpent-aircraft-references/&page=8 The Scepter wa -
Anyone working on a KH 1/35 MH-60L correction set?
LooseSeal replied to Dave Williams's topic in Helicopter Modeling
Yeah.. a pretty fiddly scratchbuild too, but a prominent enough feature to merit it! Seems strange they missed it. -
Anyone working on a KH 1/35 MH-60L correction set?
LooseSeal replied to Dave Williams's topic in Helicopter Modeling
I think people also call it the 'towel bar' antenna, the long one running along the tail. I thought maybe it was intentional, but I've seen a photo of Super 64 with it, so maybe an oversight? -
Anyone working on a KH 1/35 MH-60L correction set?
LooseSeal replied to Dave Williams's topic in Helicopter Modeling
@Floyd S. Werner, Jr. Just another thing I've noticed may be missing from the kit and you may want to also work on. It seems like the antenna (I assume that's what it is!) on the port side of the tail boom has not been included. There is no reference to it in the instructions, no holes for it or indeed no part on any sprues that bears a resemblance. -
Anyone working on a KH 1/35 MH-60L correction set?
LooseSeal replied to Dave Williams's topic in Helicopter Modeling
Very interesting, thanks! I guess with Super 61 I'll have a little more cabin space to play with, not having the aux fuel tank. Although I have placed the two main minigun magazines between the crew chief seats, where the console is on 63, and hoping that's not too much of an anomaly... -
Anyone working on a KH 1/35 MH-60L correction set?
LooseSeal replied to Dave Williams's topic in Helicopter Modeling
For the 12 7.62 ammo cans - are these the right type of boxes? Would they be placed under the seats? For anyone looking for similar things, Accurate Armour provide these as well as Live Resin's water canisters. -
Operation Gothic Serpent Aircraft references
LooseSeal replied to hawkwrench's topic in Helicopter Modeling
Not strictly OGS-related questions, but... in this image of Live Resin's M-134, is the smaller box the gun's power unit? And where would it usually be placed? I was thinking directly behind the pilot seats. Also, are there any clear images of the harnesses on the cabin seats? Most images have them tucked into the pocket or are difficult to see. The Kitty Hawk instructions are a bit weird and blurry about the 2 lower belts, they don't seem to attach to anything in particular. Thanks! -
Yeah, I've found several great shots of the IP/cockpit area but every image cuts out just where that part of the console begins. I'll just go with the kit piece then. Thanks for the clarification, though! Can't wait to see how you do your Super 63.
-
Hey hawkwrench! Sorry to bother you again, but I was just wondering about the console. Super 63, which you are building, has the command console, yes? How does that differ from the others which did not have it? The kit would have you build the large array at the rear of the console, would that be accurate if I were building Super 61? Thanks!
-
Operation Gothic Serpent Aircraft references
LooseSeal replied to hawkwrench's topic in Helicopter Modeling
Thanks for the info! I really should stop trusting the KH kit for accuracy at this point, not much to be done to remove the panel now 😞 -
Operation Gothic Serpent Aircraft references
LooseSeal replied to hawkwrench's topic in Helicopter Modeling
Exactly what I needed. Thank you very much! It's nice to finally know what it actually is. Would the OGS helos which didn't have the hoist installed have removed the joystick or just keep it? -
Operation Gothic Serpent Aircraft references
LooseSeal replied to hawkwrench's topic in Helicopter Modeling
Hi guys, I was just wondering if anyone could elaborate or provide a reference of the starboard wall section in this image? I'm finding it hard to get an unobstructed view of it in photos, and not really sure what it actually is. I've seen a twisted phone-like cable dangling from in that area in some images, so guessing it may be an intercom of some kind? I'd like to add some more detail and get the colour at least sort of right! 🙂 Thanks for any help! -
Anyone working on a KH 1/35 MH-60L correction set?
LooseSeal replied to Dave Williams's topic in Helicopter Modeling
Hey guys, I'm also looking to make some corrections, particularly to the door gunners' seats. Hawkwrench, you seem to be an authority on this! Would you happen to know of any photo references showing the H bar? Also looking for photos of the floor panels, bare ESSS mounts and survival kits... but I don't want to be greedy, haha. There seem to be next to no photos of the actual Gothic Serpent helos around, especially the interior, so getting this right is going to be a challenge... The life raft would basically just be an orange bag with white handles and a zip then plac -
Hi! I've been scouring online for someone who is also building the new KH kit (I assume KH50005?) and really looking forward to following your build as I get along with mine. I won't be going into quite as much detail as you, though, as my Black Hawk knowledge is much, much more limited. I'm still in the preparation phase and there's one thing I can't seem to get my head around... I intend to use the resin figures, and one of these figures is the M-134 door gunner, but from what I can see the gunners' seats are facing the wrong direction? The kit would have you install them with th