Jump to content
ARC Discussion Forums
  • advertisement_alt
  • advertisement_alt
  • advertisement_alt


  • Content Count

  • Joined

  • Last visited

Everything posted by sluggo2u

  1. Time to pull the trigger. Someone please sticky this post. Let the shoosting begin.......... This has only been tested to the point of the cart. If anyone has any trouble please post it in this thread and get a screenshot if you can. ARC Shirt Store Some destructions for those that would like to customize their shirt(s). If you build a custom shirt there will be the ability to change the shirt product to a non standard shirt for this campaign and will not be limited to the chosen colors. Please follow the color choices that have been decided upon. The only logos approved by Steve at this point are the ones provided. You can also choose from some stock art the vendor has available. Please do not mix those art files with the two ARC logos. You are welcome to build shirts using the stock art if you like but please don't use the ARC logos with them. I will be keeping a close eye on both this thread and the site to make sure things are going as planned. Thanks, Follow the link above and click on the "build your own" Then refer to these pics.
  2. sluggo2u

    lacquer Clear problem

    Lacquer blushing. Google it for a better understanding. Caused by the dew point and the ambient temperature being too near one another. Even if the ambient temp was 10 degrees above the dew point, the adiabatic cooling Triarius described above could drive the surface temp of the model below the dew point. There's a possibility you might recover from it by simply spraying (lightly) some lacquer thinner over the area. Obviously, you should test this in a inconspicuous area first. A paint booth will not solve the problem if it's installed in the same uncontrolled environment in which you cleared it in, unless it's heated and the subject to be painted is allowed to stabilize to the booth temp before spraying.
  3. sluggo2u

    B-58 Mach In Boid

    Dig it! Nice work. You're going to make me break mine out...........
  4. sluggo2u

    Hasegawa 1:48 F4U-4B Corsair 19 year SOD

    Thanks everyone. Prop was polished bare plastic with Alclad Chrome sprayed over it. Turned out better than I thought it would.
  5. Here goes........ Kit: Hasegawa F4U-4B (raised panel lines) Year started: about 1996 or 1997 Left to do: Scribe horizontal stabs and clean up work, paint. Why stalled: No idea, probably related to ADD, OCD or both. I've decided to finish this and use it for a paint mule. It will have a very non-standard finish. Metallic black with flames, skulls, reapers and whatever else jumps on there. Here's what it looked like a few days ago when I was testing some masks on it. This is not the final configuration by any means. Pretty much just seeing how much detail I can cram into this scale. After priming it a couple days ago. As of 20 minutes ago. Currently testing some flame techniques. Will update as things progress.
  6. sluggo2u

    Hasegawa 1:48 F4U-4B Corsair 19 year SOD

    End of the road for this one. Calling it done.
  7. sluggo2u

    My wife's cancer...all is well

    Great news! Thanks for the update.
  8. sluggo2u

    My girl

    Consider it done. Best of luck to you.
  9. sluggo2u

    Hasegawa 1:48 F4U-4B Corsair 19 year SOD

    Did some more polishing and was able to recover from a canopy flaw. Chromed out the prop. Probably put the wraps on it this weekend. There's still a couple issues I can't recover from but considering it started as a test that I had my doubts about, I'm pretty happy with it. One from my crap-o-matic cell phone.
  10. sluggo2u

    Hasegawa 1:48 F4U-4B Corsair 19 year SOD

    Sanded and polished most of the clear coat. Was able to make the paint edges disappear. Had a couple issues arise but have decided to keep pushing until it's done.
  11. sluggo2u

    Hasegawa 1:48 F4U-4B Corsair 19 year SOD

    Laid some clear. Had a little reaction with the transparent red sagging a bit under the clear. Next time I'll seal those colors prior to clear coating.
  12. sluggo2u

    Hasegawa 1:48 F4U-4B Corsair 19 year SOD

    Got some more painting done. Might have it done by the weekend.
  13. sluggo2u

    Hasegawa 1:48 F4U-4B Corsair 19 year SOD

    Finally spent some more time on this bucket. I'm not so good at taking pictures while I'm in the groove. It's pretty hard to make convincing "Fire" in this scale so I settled for old schoolish flames. All the mask work is base coated in pearl white then over-painted with Alclad transparent colors to try to achieve a candied effect, stars and bars included. That effect will not be completely evident until it's buried in clear. Still have to paint the starboard skull and flames, the reapers on the tail and the "Time's Up" text.
  14. sluggo2u

    Hasegawa 1:48 F4U-4B Corsair 19 year SOD

    Hopefully I'll be back on it in the next couple days. Been practicing the fire technique. A lot of the credit for the finish so far has to go to the primer. It was dead flat.
  15. sluggo2u

    Presenting the Shelf Queens!

    After a chat with Corsairman, I'm in. I went through the stash last weekend and pulled out all the 1:48 kits that were started on and sell off the rest. Changing scales. Anyway, I ran across a Hasegawa F4U-4b I started rescribing many moons ago. Too far along to include in for sale pile so I decided to use it for a paint mule. It was about 95 percent rescribed and got put back in the box and forgotten. No idea why. It actually looked pretty good. So I glued the wing on it and began planning out a non correct paint scheme for it. The vitals Kit: Hasegawa F4U-4B (raised panel lines) Year started: about 1996 or 1997 Left to do: Scribe horizontal stabs and clean up work, paint. Why stalled: No idea, probably related to ADD, OCD or both. I'm not going to bother much with the rest of the scribing since I'm using it as a mule. Toying with a modern wildish paint job consisting of skulls, fire, reapers, etc over black. Maybe not a popular decision with some but I gotta do what I gotta do. I've always been more into the painting anyway. I have a high end vinyl cutter and have been doing custom masks for about a year now, so it's time to do some testing. Here is what it looked like when I started fitting masks. This is not in any way the final layout. Pretty much just seeing how far I can push the detail in the masks in this scale. I have since primed it and will get a pic of that today. Right now I'm off to pick up some paint I need for this project.
  16. sluggo2u

    autism and models

    Richard, After having a less than stellar day today, it was a really great way to end the day reading your post. I pretty much looked at the six models I gave away as a simple act of participating in the raffle and a way to thin the herd of models in scales that are no longer friendly to my 50 year old eyes and to make room for the influx of 32nd scale stuff that has occupied my compulsive mind. To be honest, I had a moment of panic when I realized that I might have offered up a few less kits and maybe even some smaller kits since I was on the hook for shipping. It was nearly 80 bucks to ship them all out but I'll tell you this right now, it's the best money I've ever spent! The true credit for your connection lies in your love for your son. I am quite honored by your thoughts. Thanks for posting this and brightening up my day! Randy
  17. sluggo2u

    DIY Paint / Spray Booth

    That's how I built mine. Have not had a chance to paint in it yet but have no doubt about it's function. There's a thread on LSP. My link
  18. sluggo2u

    Yellow Frog tape

    I have. Did not care for it. I found Suretape CP 60 on Amazon and purchased some. It is very similar to Tamiya tape and is around 10 bucks for a 2in x 60yd roll. Personally, It's now my go to tape.
  19. sluggo2u

    The 2014 raffle prize list!

    Tried to send you a message and it was denied. Message me your address please. If you are looking for the other 3 McClarens they did I have them too. Randy
  20. sluggo2u

    The 2014 raffle prize list!

    Tamiya Do335a Pfeil with Kettenkraftrad 1/48th (cockpit started, paint mask included)
  21. sluggo2u

    ARC Cancer support shirts

    Update. The remaining order was filled and shipped today. Tony, Your patience is appreciated. Waiting for the remainder of the commission to clear so it can be transferred to Steve. I will update when that happens.
  22. sluggo2u

    ARC Cancer support shirts

    Update on the situation. I have suspended the ability to order from the site until further notice. The vendor has failed to fulfill the very first order that was placed and I can not get them to answer the phone or my e-mails. After discussing this with falcon and greywolf, we agree this is the best course of action for now. The last thing we want is for someone else or everyone else for that matter to have issues getting their orders. I will continue to pursue getting Tony's order filled and I'll take personal responsibility if that goal is not realized. Thanks, I'll update when I have some news. Thanks again to everyone who has participated thus far.
  23. sluggo2u

    Birthday Airplane

    I'm a canceled C-130 LM contract.
  24. sluggo2u

    1/48 Otaki Bf109 G6

    That thing fought you tooth and nail! Glad to see you persevere. Nice work. I bet you're glad it's done.
  25. sluggo2u

    ARC Cancer support shirts

    Been MIA. Sorry Update 20 TOTAL SALES $840.36 USD TOTAL COMMISSIONS $300.10 USD VISITORS 242 Pushed 214.23 Through to Steve's paypal. The remainder is held until beginning of January. I'm waiting on a response from them as to weather or not we can add additional admins to the store and details of one order that is in limbo. Apologies.