Jump to content

Dave Roof

Manufacturers
  • Content Count

    1,745
  • Joined

  • Last visited

Everything posted by Dave Roof

  1. Our second AH-1Z sheet will be sent to Microscale at the end of September. We are currently waiting for reference photos on the Czech Republic AH-1Z, which should arrive early next month. Sheet is 8.5 x 11 inches. AH-1Z BuNo 169498, the tri-color scheme, is covered as it appeared with three different squadrons. HMLA-269, who originally painted it, HMLA-169 and HMLA-267. The latter being the current operators. Changes in the markings, camouflage pattern and airframe will be noted for each time period it was flown by each squadron.
  2. Yes, FL32006 will be a second Harrier sheet and FL32007 will be the maintenance data sheet.
  3. FL48023 is in stock and shipping. This sheet is only sized for Hasegawa FL48024 (Hasegawa and Kinetic) and FL48027 (Hasegawa) will be going to print next week. FL48028 will be sent to print in September. This sheet is only sized for Hasegawa Leatherneck Legacy Hornets parts V and VI will be sized to fit both kits. Artwork for these two sheets are still in progress with options being determined.
  4. Steve, Not an error. Two different Hornets at different times. If I do any of these markings on a 72nd scale sheet, they'll be mixed up with other airframes. I can take requests for options to put on a sheet, but I no longer do custom decal art, sorry. Appreciate you supporting the line as well, Thank You!
  5. Don, Still drawing it. Honestly, got sidetracked with Hornet stuff. I'll get back to the 401 sheet as soon as I can.
  6. This sheet, along with FL48024 Leatherneck Legacy Hornets II, will be going to print soon. We hope to have them back from Microscale sometime in October. Sheet is 8.5 x 11 inches and features 10 options covering F/A-18A++, F/A-18C, F/A-18C+, F/A-18D and F/A-18D ATARS aircraft. Sized to fit the Hasegawa kit.
  7. It was an absolute pleasure meeting both of you!
  8. Complete and utter failure. I'll try again with new settings after the Nationals.
  9. I'll be running them tomorrow. Been working to build up stock for the Nationals.
  10. Oh well, our 4th table was given to Flight Line Resin
  11. I'm actually going to be trying again within the next day or two. Found a new setting that prints some of my other small stuff perfectly and will use them for another test print of the 72nd probes. Had actually forgot about them until I saw this thread.
  12. They weren't always used together and neither were required to carry or expend GBU's. The 173 was always mounted on station 6 and the 38 was always on station 4 with adapters specific to each (there was no other way to carry them). For the GBU on early Alphas, it would have been -12, -16 or -10.
  13. Jeff, I haven't been able to do anything new since the move and I'm still trying to get caught up on orders. I didn't even set up a printer until a few days ago. As of today, I still don't have a workshop and almost all of my stuff is still packed away. The curse of buying a house half the size of the sold one! Really, really hoping to be back to 100% shortly after the Nationals and will definitely get back to that update set.
  14. Not really 'early' any longer. I've got a couple shots of Deltas from just a few years ago with them as well.
  15. Doors 5R and 5L were actually eliminated on A/B airframes. All of my reference material is packed away at the moment and I don't recall the BuNo off hand. I'll post that info, as well as more once I get caught up with FLD stuff.
  16. Working as quickly as I can to get things back to normal. As I mentioned on the Facebook page, we ran into several issues with the new house (new to us anyway) that needed to be addressed. Kitchen needed to be completely replaced, as well as the back deck. Water damage from faulty flashing and other electrical stuff. One of the biggest issues we faced is the fact the new house is much, much smaller than the old house. Everything related to FLD and the hobby in general is still packed away and I've been having to dig through boxes to find items to fill orders. None of the 3D printers are set up
  17. Probably in the $10 to $15-ish range. I do my best to keep my prices as low as possible.
×
×
  • Create New...