Felinoid

I am building a Monogram 1/72 EF-111. There is a small part that attaches to the inside of the one piece canopy. I have learned from experience that regular adhesive Will craze the plastic, and that white glue, while not crazing the plastic, does not hold very well and often the part falls off and rattles around the cockpit. Any ideas? I was thinking a very tiny drop of clear epoxy. Any input is welcome.

spejic, Many thanks for your input. I will probably go with a black primer coat and I will test with the Tamiya JA Grey/Green. And yes, I will build up the kit in sub- assemblies, masking off the contact points and clear pieces. Felinoid

I have acquired an AMT Star Trek:The Next Generation Romulan Warbird. It is a pretty good kit, but there is no painting guide. The instructions say to use the box art and available references to use as painting guides. Can anyone provide something slightly more detailed? Also, what to use as a base color? The closest that I can find is Tamiya JA Grey-Green, but I am a little bit color blind. Any input is welcome. I may be contacted at dinorich1@hotmail.com.

The headlines says it all. The Italeri kit decals would be fine, or any aftermarket.I do not have much to trade, but I do have the fine Revell kit decals. Or I can purchase them, either USPS money order or check (no PayPal, long story). Ships to New Britain, CT, 06052. Send me a pm or email directly to dinorich1@hotmail.com. Looking forward to hearing from someone.

Exactly what I needed. Many thanks!

I am looking for a few kits of Revell Germany’s Luftwaffe “What Ifs” that were put out about ten years ago. I have the Horton flying wing, I also recall an upgraded ME-262 with extra weaponry and a Focke-Wulf jet, not the swept wing jet done by a few companies. Can anyone help me with a complete list? I have checked their website, several dealers, and several hobby stores, no luck. Please post here of via a PM. Many thanks in advance.

I am looking for a 1/72 scale SUU-23 gun pod for a Fujimi FGR.2 Phantom. The kit provided one is not very good, neither is the Hasegawa Version from their weapons set. I have read that there is a very good resin one, but I cannot find the manufacturer. Please let me know if you can help me, my e-mail address is dinorich1@hotmail.com. Many thanks in advance.

I recently stopped here after perhaps ten years. I was very pleasantly surprised, their model kit selection had greatly expanded, They have a great many older kits at very reasonable prices, in fact I spent $100 on old kits! Some of them are two Special Hobby F-86s, an H and a K, both for $19.99 each (I have seen them going for $40), a Fujimi British Phantom for $12.99, and a Tamiya Bell X-1 for $11.99, plus a few supplies at good prices! In all, highly recommended, worth the trip if you are in the area. Very easy to find, on Route 1 in a Big Y plaza, you can’t miss it. Closed on Tuesday, btw.

I found a set of Moskit exhausts. Many thanks for your responses and suggestions.

You have to wear a mask and use hand sanitizer but Amato’s is open! Bought two kits this morning, I was their first customer.

Found a set. Many thanks for your PMs.

The title saws it all. I have recently gotten back into the hobby and found a Hasegawa 1/48 P-40E while cleaning out my basement ( I had completely forgotten about it). I am looking for aftermarket exhaust stacks; Moskit made beautiful metal parts that I have used before, not certain if they made any for the P-40. That or anything else would work. I can pay by check or money order, no PayPal, had a bad experience with them. Reply here or in a pm. Many thanks for looking.

Geoff M, that’s it! I made a Google search and came up with Moskit on EvilBay, but nothing for P-40s. I will be posting a lookout on ARC soon. Many thanks.

I am just getting back into the hobby and found a Hasegawa 1/48 P-40E while cleaning out my basement. Are there any aftermarket cast metal exhaust stacks for this kit? I did a Google search and could not find anything. About ten years ago, there was a Russian company that produced excellent am parts for 1/48 WWII planes, I built a few kits utilizing them. Please respond here or by PM.

I am looking for a few Dragon 1/72 scale armor kits. 7491 Erzatz M-10 7332 M6 Bradley Linebacker 7324 M2A3 Bradley 7333 M3A2 Bradley w/ERA 7249 Leopard 2A4 7247 M2A4 Bradley IOF I can pay by check or money order, not PayPal (had a very bad experience with them). Please respond by either post or PM. Many thanks in advance.