F-16

I am looking to detail the electronics bay (behind the cockpit) on my 1/48 F-104C/G kit. I am trying to find more color photos that show the details of the bay. I have only found these CF-104G pictures (Google) of this area... What should the colors be? One pic has the bay in gray overall with a YZC divider. The next has YZC bay with black boxes. The third pic has, well, I can't tell. It might be gray with black edges? What colors should I use for this bay/area? Black or gray? Perhaps there is a T.O. for this area that can help with the

Some good photo's of all white mules... Flight Deck Mules... Scott CNJC-IPMS

Is there a third crew hatch missing from the sprue? I only see the front cockpit hatch and one crew hatch.? Scott CNJC-IPMS P.S. I remember getting this model as a "combo boxing" with the F-89. Ahh, The memories...

I thought about contacting Tamiya, but this was a Limited Edition (2010) kit and I don't think the decals are available anymore. Scott vomacka@aaahawk.com

I need the decal sheet from the 1/48 Tamiya P-51B kit (92216) My kit (bought on Ebay) is missing them. If anyone has this kit and can help me out, please contact me via email below. Thanks Scott vomacka@aaahawk.com

I need some help finding a "Regular green" color in the AMMO/Mig acrylic range. Here is the SB listing for "AMMO Acrylic green". SB AMMO/Mig green listing Which one of these is "plain acrylic green"? I tried "pure green" and it is too light. Scott CNJC-IPMS P.S I tried asking AMMO about this and they never replied.

Are the decals (windows) sized for any specific 1/144 model? Will they be OK for the old Crown/Minicraft kits as well as the new Academy or Revell? Scott CNJC-IPMS

Done and Done. Thanks guys! Scott CNJC-IPMS

I recently got a bagged 1/48 Monogram P-47D kit (#6838), but it is missing two things. The prop and the decal sheet. I need part #4 (Prop) and the decal sheet. If anyone has this kit and can help me out, please E-mail me: vomacka@aaahawk.com Thanks. Scott CNJC-IPMS

Has anyone used the 1/48 Medallion Models MM-24: P-47D Upgrade Set for the Monogram kit? http://www.modelingmadness.com/scott/decals/starfighter/medallion/mm24.jpg How is the set? Any problems with assembly? How are the instructions? Thanks for any info you can give me. Scott CNJC-IPMS

This 3M one has possibilities... 3M Respirator Scott CNJC-IPMS

Do you have a model number or picture? Scott CNJC-IPMS

It is time for me to retire my AO Safty Twin Cartridge Respirator after ten years of hard use. I am looking for a respirator mask that has a clip/buckle on the neck strap so I can take the mask off easily. Hopefully with good heavy duty straps as well. I only use it for building models. What are some good suggestions? Perhaps a 3M respirator of some kind? Please provide a Amazon link to the item if possible. Thanks for all you help. Scott CNJC-IPMS

What about the escape capsule folded fins? Also the nose strut link arm was different on the first prototype. Scott CNJC-IPMS

They are showing a CAD for a P-3 Orion with extended flaps and other things over on Britmodeler... New tooled P-3 Orion.. What do you think? New tool or a Hasegawa re-pop with resin extras. (I think the different colors mean different parts?) Scott CNJC-IPMS

I am looking for a good CA glue debonder that wont attack paint or plastic. Acetone nail polish remover does not seem to work for me. I saw this video for a product called Golden West Super Solvent. Golden West Super Solvent "US-1 Super Solvent debonds and dissolves CA (super glue). Just a little bit is usually enough to unstick your hands and remove the CA glue. US-1 is a nitroalkane formula. Most other CA debonders are based on acetome. US-1 works quicker and is much less likely to damage the surface to which it is applied. Super Solvent is safe to use with most paints and finishes

Here's a link to the news... BAM is now closed... "Due to changing life circumstances BAM Models is now closed. All orders placed will ship before December 22nd 2023 Thanks for your support over the years, it's been a blast providing you with out of the ordinary conversion sets! Happy modelling, Arnaud"

I need the decal sheet from the 1/48 Tamiya BF-109E-4/7 (61063) kit. Mine is missing them. If anyone has this kit and can help me out, please email me. Scott CNJC-IPMS vomacka@aaahawk.com

I am looking for part #23 (AN/ARA-25 fairing) for my Revell Panther kit. This part is missing in my kit. If anyone has this kit/part and can help me out, please email me. Thanks for your help. Scott vomacka@aaahawk.com

Thanks for all the help. I really appreciate it! I found this description on what the crown cap actually does... Crown Cap for Iwata airbrush "The crown cap allows you to get closer to your work and thus achieve finer detail, whilst still protecting the needle. It also decreases paint build-up on the needle and in the nozzle cap, preventing spitting. Both of these benefits are obtained due to the better air displacement provided by the cut away sections of the crown cap. The cut-outs allow air to displace when you are getting very close to the work surface, so a crown cap is a gr

I am using an Iwata Eclipse "CS" airbrush and Ammo/Mig acrylic paint. I have heard on the forums that some people remove their airbrush needle cap to help reduce tip dry using acrylic paint. (Not just to clean the needle) Is this just a rumor or is it true? Does it work? Has anyone tried this? Scott CNJC_IPMS

I just cleared my cache and still get the error... Scott CNJC-IPMS

I have been trying to acess www.cybermodeler.com for the past week, and I keep getting an error that says... "www.cybermodeler.com uses an invalid security certificate. The certificate is not trusted because the issuer certificate is unknown. The server might not be sending the appropriate intermediate certificates. An additional root certificate may need to be imported. (Error code: SEC_ERROR_UNKNOWN_ISSUER)" Is anyone else getting this error? It looks like the site certificate is expired, but for more than a week? There is nothing mentioned on his FB page either. Sc

I need the F-5E Photo Recon parts from the 1/48 Academy P-38 (COMBO) kit # 12282... G10,11,12 clear parts. C12,13 nose halves. If anyone has these parts and can help me out, please email me. Scott vomacka@aaahawk.com

I just tried to use the decals from my (1983) 1/48 Revell B-1 kit and they would not come off the paper. They are trash. However, I need to find replacement decals for the stencils (Yellow RESCUE arrows and boxes, Red ejection triangles). Any ideas where to find these yellow stencil decals in 1/48? Thanks for any and all help. Scott CNJC-IPMS