thuynh

Hi. Just curious how did you get your new local tracking number ? I just checked my account on Luckymodel site and no new update. Tracking number still shows the one to the Kansas office. Thank you. Thanh

Dear Raymond, Thank you for the quick clarification. Really appreciate it. Thanh

Hi. Has anyone ordered the GWH A-10 kit sent out on the first batch from LuckyModel and received the kit here is the US ? My order shows a UPS tracking number and it is out for delivery in Topeka, Kansas when I am located in California. Thank you. Thanh Huynh

Squadron webpage shows they are taking pre-orders for some KittyHawk 1/32 scale kits. I guess Kitty Hawk is back in business ? 🤔 Thanh Huynh

PM about the Meng F-18E. Thanks.

Hi. If you have any left over or unused decals from the 1/48Eduard A6M2/M3 series then I am interested in buying them for my overtrees kit. Thank you. Thanh Huynh

Hi Mike, USAF decals received today. Thank you very much. Thanh

Hi Everyone. I am looking for the "USAF" decals on the top right and lower left wings of an F-86F-30 in 1/48 scale. If you happen to have spare ones, extra left over from your built kits, please let me know to purchase them. Thank you. Thanh Huynh

Hello Dai, Thanks for the reply and the tip. Once i have a replacement set of decal for the bottom part of the wings then i will follow your suggestion. The area I have issues with it has 4 bumps with various sizes as pictured below. I was able to remove the decal by applied some Solvaset to soften the decal again after it dried and removed with masking tape. Some stubborn area, i had to use to a toothpick to scratch it off. Now I have to retouch the area with paint ☹️ Thanh Huynh

Hi Curt, That's what I did. Been watching lot of video about building kits on youtube and i followed the tips. I touched up the roundelle with Solvaset every couple hours but it did not help. Will have to order a set of WW2 RAF insignia and will give it another try. Thank you for the reply and tip. Thanh Huynh

Hi everyone. Just wondering if there is any tips or workaround to set decals on the bottom portion on a 1/48 scale Spitfire wings. The bottom surface of the wings is not even as it has holes and couple bumps. I used Solvaset to soften the decals for the round RAF insignia and when it dried, it has some break lines and wringles around it. Beside painting the insignia, is there a workaround ? Thank you. Thanh Huynh

Hi Ed, I take the A-10 Heavenly Hogs set if it is available. Thank you. Thanh Huynh

Hi Nebbor & Spook498, A forum member is sending me his unused spare parts so it looks like I will be good to finish my kit. If still needed down the road then I will let you know. Thank you for reaching out. Thanh Huynh

Hi. I lost them during a move last year. I am looking for replacement for the pylon to mount the missile launcher on the most outer pylon. I have the Hasegawa F-18E, kit number 09736. They are part numbers C8 to C11 as listed in the instruction sheet below, step 12. https://www.scalemates.com/products/img/7/7/9/186779-11-instructions.pdf If you have spare ones and not being used then I would like to buy them from you to finish this kit. Thank you. Thanh Huynh

Hi Niels, Any unit will do. Thanks for checking. Thanh

Hi Everyone. My Tamiya P-51B decal sheet is going bad. They broke apart into pieces once i took them out of the water. Does anyone have a spare and good decal for a 1/48 P-51B kit for sale ? Thank you. Thanh Huynh

Hi. I am interested in the ZM F-4D if it is still available. Thank you.

Hi. I am wondering if anyone is using a respirator when painting your models and when cutting, sanding resin parts ? I am looking at this model and wondering if it is good enough. https://www.3m.com/3M/en_US/company-us/all-3m-products/~/3M-Half-Facepiece-Reusable-Respirator-Assembly-6191-07001-AAD-P100-Small-24-EA-Case/?N=5002385+8709322+8711405+3294759262&rt=rud Any advise or suggestion is greatly appreciated. Thank you. Thanh.

Hi. I am interested in the GWH F-15C if it is available. Thank you. Thanh

Does anyone know what happened to a modeling website, www.moxdao.com ? It seems to be off line since late February or early March 2020. Thank you. Thanh.

Hi Ichitoe, Yes, I am in California, San Francisco Bay area. I will PM you. Thank you. Thanh.

Hi. I lost the front landing gear for my 1/48 Hasegawa F-16A and wonder if anyone has an spare one that not being used and available for purchase. Thank you. Thanh

Hi Juan, I am interested in this bundle if it is still available. Thank you. Thanh

Hi Colin, I am interested in this Kinetic kit if it is still available. I am in CA 94587. KINETIC 1/48 F-16E (Block 60) “Desert Falcon” UAE w/CFT (48029) $35 Thank you. Thanh