Dog1

how many coats of thinned clear and which grade sanding paper , by very fine you mean 4000 to 10000 ?

So its decant , wait 1 day for the prop to evaporate , airbrush , clear . i find cans to be ruthless even at a distance and in movement , for large areas it can overspray and run creating large deposits at corners . I find myself wasting a lot of spray as well . What i like about cans is that strong uniform gloss finish to the major surface .

Hello My objective is to find out if you can get exactly the same result using a can spray for color X example yellow by airbrushing the same color gloss bottle by adding clear to make it as gloss as the TS spray " i tried Tamiya TS yellow and Tamiya LP8 yellow lacquer and it was not the same yet at the store i was told the lacquer color equivalent to TS range should be the same . . Another question is by decaning a color and using the color through the airbrush will it give exactly the same color result and is this action the objective for small touch ups ?

In order to get the same shine as can sprayed , can one add clear to the paint and diluent and airbrush to get the same result ?

will order a tamiya bottle and conduct a test on a styrene sheet and match to damaged surface . thanks tip.

the reason for decanting is to use the same Tamiya yellow color source for the touch up to remove the white spots .Will this give a 100% match ? If instead i use a Mr Color lacquer yellow from a bottle for the touch up will there be a difference ? at the local Tamiya shop they told me the Tamiya spray is the same as lacquer .

Hello How do i know the propellant is gone ? i must leave the glass bottle lid open 2 days ? i will post image today .

hello If i decant a spray with the intention of airbrushing a small surface area slightly smeared , "small white blemishes over can sprayed yellow " , i still havent applied anything on top such as clear , will this blend 100% without leaving any border ?

In Thailand today they are registering new patients with first doze to be Sinovac and the second to be Astra Zaneca , is a mix being applied in your countries as well since WHO approved same this week ? The results have been positive and its reducing the time in between shots .

they are recommending that one too . thank you all for assistance .

this no good right ?

flat base is something i have never understood and was never in the past able to use it to flaten . I cannot remember 15 years ago what i used to add to flaten a gloss or to flaten further parts or small areas without using the spray can . I used to use acrylic and enamel then . I will ask the Tamiya store what they recommend .

GX114 as stand alone and C182 for flatening a paint ?

thanks for help

My concern is the decals , so gently does it with rag wheels .What does 2K clear gloss car finish mean ? I am using Mr Color clear spray can for finishes . Have'nt been happy using airbrush maybe due to wrong percentage of diluent .

Gunze GSI Mr. Hobby Color Lacquer GX114 Super Smooth Clear Flat is this the traditional flat you add to your paint ?

Is it risky to polish post clear coat over decals with a Dremel using the felt or cloth type wheels ? and will it shine more than polishing with wax?

Not happy with the airbrush experiment i diluted heavily and this time dry brushed from the opposite side of the clear acrylic and the result was excellent . On none chrome styrene parts usually i paint a silver background before painting on the clears with brush always . I am seeing this happen often where after a while a paint will kind of begin expiring and lose consistency . Solution is to order a fresh batch .

i tried for the first time to airbrush clear on a chrome plated part and the result is a bright red and not clear , Does clear work with airbrush ?another question is i see my red clear is not as good as it was when i first bought the bottle it seems to have been compromised with time , its thicker , sticks and not really clear and oily looking . can it be saved or is it time for a fresh batch ?

thicker version of primer noted . thanks support

so if Mr Surfacer white primer was applied no matter what is below it the same paint applied wether same spray can to both or airbrushed to both parts will be exactly the same ?

yes , thats the after market resin short tail . I did not wash the part as suggested earlier .

pics

i will prepare close up pics and post in the next 24 hrs .

i did use a light color primer on the resin part Mr Surfacer and then Tamiya can yellow but its still not equal to the styrene sprayed part . The sprayed styrene part was with Tamiya can yellow as well . When sprayed on to the resin part it dulls completely .The lighter the color the bigger the difference .