-
Content Count
2,563 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Posts posted by drhornii
-
-
On 5/4/2023 at 5:12 PM, okthree said:
Some of the Guard units especially those flying block 50/52 jets are replacing their analog flight instruments on the lower center console with a glass center display unit.
Tulsa upgraded all their block 42's to the new center display
-
Just preordered one from Squadron. They say that it is expected some time in June
-
Tulsa 89-2167 with black outline Indian head tail flash would be good
-
Looks like one has been located, just half way across my state!
Thanks everyone
-
I used my Tamiya ones on my F-16 and that is the only modern Tamiya 1/48 kit (that would have AMRAAMS). I do have a stash of Tamiya vipers but not ready to snip one off at this time. One option is to get three Hasegawa ones or aftermarket missiles that match.
Good luck, I am sure one will turn up
-
Making a Tuskegee Airman tribute display for local air & space museum. I have the AMT F/L but is the short version. I will probably be fine but would prefer the long version.
-
Does it have to be Tamiya? I think I have other brands in the spares box
-
I have a 32 scale resin pod but I have to dig it up and see which one it is. If it that one, I will give it to you
Please remind me if you do not hear back
-
This sprue has the gun pods and leading edge covers for the Q version
tryingvto contact Hasegawa but request not going through
thanks
-
I think I got it, 36270 looks better
-
Looking for the correct hull color? Using 36307 and it looks a little too brownish. I am working on the USS Tulsa LCS 16.
-
I have the Draw Decal markings for4 Stewart (Single gray scheme) that I will pass on
-
I need the Oman BAE Hawk decal portion in 1/48 scale. It does not need to be Model Alliance but I do not know anyone that makes markings for a BAE hawk of Oman Air force.
-
My commander flies for Omni and he is trying to get a paint sample from them but they said the fuselage color is "Silver Mica". My issue is in 1/144 scale, any metallic flakes would be way out of scale. I am looking at different silvers but looking at photos, getting a right color seems difficult. At times it looks pearl white, other angles silver........I have orderered Xtracolor from Hannants or Roll models, will look into that.
Will do the Voodoo gray on the wings.
Thanks!
-
I am trying to nail the colors on an Omni Air 767 and I am having issues with a few of the colors. I think I have the Ruby Mica color, or something close.
One is the Silver Mica on the fuselage, trying to get a good match without the metallic?
Next is the wing, that does not have Coroguard. Any idea of what colors to use on the wing (top & bottom)?
-
-
-
It looks great Dave. Do you have a link to the review yet?
The review is now up on IPMS USA
-
Have you looked at the seat belts? The kit PE do not match any reference photos that I could find
-
It looks great Dave. Do you have a link to the review yet?
Hopefully any day now. I sent the review in Sunday night.
As for the caravan decals, a must!
-
great looking model but whats up with the blades..Wow, Trumpeter messed up on this one..Didnt they?
Winder if they did a 3D scan while the blade tie downs were still attached.....then again you would not stress the blades that much!
-
Just finished a build review for IPMS USA on this subject. I am not an expert on this subject but it is a nice looking kit but I am not sure where or why Tumpeter did some of the stuff they did....I wish I had the time to do the corrections that BK-117 did, very impressive!
Rotor droop too excessive
Mod so rotor can rotate, kit had very shallow guide, poor design
-
I will be building a 72 scale PBY for a Pearl Harbor survivor and he was pat of VP-14. I know Superscale make a set but I am not sure what time frame those are for.
Does anyone know of a set of decals for this time frame? I believe the tail had red & white stripes.
-
Hi y'all. Some of you may remember me posting questions about the F-15E elsewhere, and yes that's because the F-15 is my favourite plane and I'm building it as my signature work. With that said, I'm gonna try to be as accurate, detail-oriented as I can to almost down to the rivet colors.
I will throw questions here for things I couldn't find a good answer to after researches, and I hope you guys can help me.
1. For the LANTIRN navigational pod, I went through photos online and my own collection of pictures that I had taken when I went to the airshow. Some showed the pod with a creamy-orange color for the window, while the picture I took showed the window like a glass panel. While I'm inclined to paint it creamy-orange, what colours will you guys suggest? And why the differences?
The color differences are likely the different camera and lighting angles creating different colors of the coating in the glass. I would go with the orangish (clear orange that is) color.
2. For the exhaust nozzles, instruction recommended Steel as the colour. However if I'm to be extra critical, I'm not sure if Steel is truly the right colour. What do you guys think?
Outer nozzles are titanium and inner surfaces are ceramic ciated and titanium, does not have to be a metallic color, just match photos. The E has two engine flavors, -220 and -229 Pratt engines unless you are building a Korean bird or Saudi SA version, then it is a GE engine which will be ceramic internal lining and titanium turkey feathers. Oh yea, there is Israel, Pratts with turkey feathers.
3. After consultations with you guys on the CFT, I also studied the colours for the BRU and concluded the dials are silver while the platform is grey. I'm just wondering what you guys also think on this as well.
In addition to answering my questions, I hope this thread can also help anyone who's planning on a very serious build of the F-15E in the future.
Thanks again!
Kinetic good f-16d
in Jet Modeling
Posted
I can see if I can find the sprue shots but it has both the GE and Pratt engine/intake combination in this kit.