-
Content Count
471 -
Joined
-
Last visited
Content Type
Profiles
Forums
Calendar
Everything posted by AndrewPerren
-
Kitty Hawk 1/48 UH-1H WIP (Update 6/29)
AndrewPerren replied to JesusNut's topic in Helicopter Modeling
Nice to see you've made a start. As for the pilot seatbelts, can I suggest you measure and cut them into two pieces. You can glue it into the existing hole and then there is plenty of room for the second piece to be glued inside between the cushion and seat side. It looks like it comes through but it doesn't. -
Academy MH 60 S Helicopter 1/35 scale/
AndrewPerren replied to Rotorman's topic in Helicopter Modeling
Oliver is there anything you can't do? -
Agreed the lack of 1/48th European origin Helos is a real hole in the market. Surely there would be some interest in the NH-90/MRH-90 families and the Pumas.
-
Nice scheme.
-
The updated Academy RAAF F-111C kit goes a long way to addressing the kits shortcomings and IMHO builds into a better looking pig. Depends on what you want from the kit.
-
Kitty Hawk 1/48th scale Huey
AndrewPerren replied to Floyd S. Werner, Jr.'s topic in Helicopter Modeling
I'm in the optical illusion camp with all the curves going on there. FYI The doors fit perfectly closed (in fact you can use them as masks for the interior when painting). You can choose to see I problem there if you want, I don't and I won't be fixing it on my next builds. -
Kitty Hawk 1/48th scale Huey
AndrewPerren replied to Floyd S. Werner, Jr.'s topic in Helicopter Modeling
I can't see which pics you are referring to as they are in photosucket. But to address your points my main doors could have gone back another 1-2mm maybe? but I wanted to make sure I had adequate glueing area in the door slide tracks. Looks fine to me. -
Nice work Rod.
-
Great work. One of my favourite display teams.
-
Academy MH 60 S Helicopter 1/35 scale/
AndrewPerren replied to Rotorman's topic in Helicopter Modeling
Nailed the figures Oliver. In fact I think your style lends itself perfectly to doing great figures. -
1/48 Kittyhawk UH-1H, 9 SQN RAAF
AndrewPerren replied to AndrewPerren's topic in Helicopter Modeling
Many thanks Bo- 28 replies
-
- werners wings
- uh-1h
-
(and 2 more)
Tagged with:
-
Blimey Phantom that's quick work. Cool scheme.
-
1/48 Kittyhawk UH-1H, 9 SQN RAAF
AndrewPerren replied to AndrewPerren's topic in Helicopter Modeling
Thanks Ray, Calum & Scooby.- 28 replies
-
- werners wings
- uh-1h
-
(and 2 more)
Tagged with:
-
Super cool Norbert. I bet they would look great sitting on the tail ramp of a CH-46 as well?
-
1/48 Kittyhawk UH-1H, 9 SQN RAAF
AndrewPerren replied to AndrewPerren's topic in Helicopter Modeling
Thanks Devo. Yes all the aircraft fitted for Bushranger Mods started out as slicks as delivered and could also be re-configured back to a troop carrier by simply removing the weapons kits. I guess dependant upon airframe availability and tasking. Bushranger was an in theatre Aussie modification that was born out of the need for in-house air to ground fire support for our own operations. It became too hard to co-ordinate with the yanks, so the story goes they scrounged enough components from the US boneyards there to prove the concept. The kit does not i- 28 replies
-
- werners wings
- uh-1h
-
(and 2 more)
Tagged with:
-
1/48 Kittyhawk UH-1H, 9 SQN RAAF
AndrewPerren replied to AndrewPerren's topic in Helicopter Modeling
all good. Thanks to everyone for their comments. Much appreciated.- 28 replies
-
- werners wings
- uh-1h
-
(and 2 more)
Tagged with:
-
1/48 Kittyhawk UH-1H, 9 SQN RAAF
AndrewPerren replied to AndrewPerren's topic in Helicopter Modeling
Thats a fair point about the control tubes. The horns they connect to at the bottom seem to be the main culprit. Somebody said earlier they are mirror reversed to the real thing. I also think they could extend and wrap around the mast a bit further. No way to fix the kit parts without completely replacing. As far as the main mast that is mostly due to me tying the blade down to the tail. As built the main rotor actually teetered on the joint at the top of the mast. It just seemed too weak for me knowing the model will have a few outings so I firmed up the joints for strength.- 28 replies
-
- werners wings
- uh-1h
-
(and 2 more)
Tagged with:
-
1/48 Kittyhawk UH-1H, 9 SQN RAAF
AndrewPerren replied to AndrewPerren's topic in Helicopter Modeling
No problems to use the pics Floyd. Glad the decals lived up to expectations.- 28 replies
-
- werners wings
- uh-1h
-
(and 2 more)
Tagged with:
-
Hello All Just finished the 1/48 Kittyhawk UH-1H as a Slick from 9 Squadron RAAF in SVN. I've added numerous bits n pieces to this build as well as the excellent Werners Wings Huey decals. It was done as a review build for The Modelling News so I can only share a few pics here. Follow the link below to the full 4 part WIP & build article. http://www.themodellingnews.com/2017/09/build-guide-pt-iv-andrew-finishes.html I hope you like this one. I can't wait to build another. Cheers Andrew P
- 28 replies
-
- werners wings
- uh-1h
-
(and 2 more)
Tagged with:
-
Man she sure is toting some iron. Well done on the build, you've inspired me to look at a SLUF again from the stash.
-
Kitty Hawk 1/48th scale UH-1D Online Build
AndrewPerren replied to Floyd S. Werner, Jr.'s topic in Helicopter Modeling
Hey John maybe you got a damaged sprue or short shot from the mould. Main windows should be parts 2,3,6,7 This is from Glen at Kittyhawk in another thread. please email Sophia Lynm, tell her what is missing or defective, she will mail it to you. sophialynm@gmail.com later Glen -
Helicopter group Build Completion and winner
AndrewPerren replied to Winnie's topic in Helicopter Modeling
Congrats and thanks again to the mods for the GB. -
Gotta be happy with that one.
-
Great job. Nice to see it in the Polish colours as well. If only they could get their act together properly on their instructions.
- 19 replies
-
- 1/48
- kitty hawk
-
(and 2 more)
Tagged with: