Search the Community
Showing results for tags '1/48'.
-
Selling the last released detailing sets of Metallic Details: Interior for aircraft model MiG-25 (ICM) in scale 1/48 - $10.50 Set contains photoetched board (54*70 mm) for interior detailing. Exterior for aircraft model MiG-25 (ICM) in scale 1/48 - $14.00 Set contains photoetched board (42*144 mm) for exterior detailing. Wheel bays for aircraft model MiG-25 (ICM) in scale 1/48 - $19.00 Set contains photoetched board (76*144 mm) for detailing wheel bays -
Thanks for looking. And please feel free to make an offer, the worst I will say is, “No, thanks.” Sales only, I am not looking for trades. Please respond via email, I will only periodically read PMs. Email is: cjhamilton AT gmail (you know the rest). Cheers! CJH KITS & DETAIL SET 1/350 Bronco Models USS Independence – LCS-2 $17 Open box, sealed parts Dragon USS Ticonderoga – CG-47 $30 Sealed (cellophane is damaged) Dragon USS Hewitt – DD-966 -
All kit boxes have been opened, but all of the kits are intact. Everything is 1/48 unless otherwise noted: KITS Academy Hawker Hunter F.6 (kit was missing roundel decals when purchased second-hand) $20 (see below for aftermarket parts & decals) Kitty Hawk Mirage F.1CT/CR $25 PENDING Tamiya Spitfire Mk1 $20 Tamiya Spitfire Mk.Vc $20 Eduard Albatros DV with photo etch and white metal engine $20 PENDING USA Models O-1 Bird Dog $20 Fine Molds D4Y2 Judy $25 Classic Airframes Sea Hawk Royal Navy -
Hi all! I would like to share my latest completed project, the 1/48 Great Wall Hobby F-15C from the MSIP II ANG boxing. I decided to build it in the fantastic splinter camo markings of the 65th AGRS circa 2013. The camo was done without a mask, using Tamiya tape and just kinda eyeballing it. I started by painting the gray, then masking and painting either the white or blue areas one at a time. Some areas were easier to paint the white over the blue, and others the blue over the white. I used some aftermarket on this one, including a Quickboost seat, Meng CATM Aim-9M -
Eagle Strike Decals for sale
StevenatorLTFO posted a topic in Buy and sell - add scale to your title
Eaglestrike 1/48 $12.00 Each (unless otherwise marked) 48001 Phantoms Phorever Pt. 1 (2 available) 48002 F/A-18C Hornets of the Fleet Pt. I (2 available) 48003 F/A-18C Hornets of the Fleet Pt. II 48004 Phantoms Phorever Pt. 2 (2 available) 48008 Phantoms Phorever Pt. 3 48009 Phantoms Phorever Pt. 4 (2 available) 48010 Deadly Dorniers DO-217E 48014 Bristol Blenheim Pt. I (2 available) 48015 Bristol Blenheim Pt. 2 48016 Royal Navy Grumman Martlets 1941 – 1944 Pt. 1 48017 German Lozenge Camouflage (5 color -
Two Bobs 1/32 $14.00 unless otherwise marked (also see combo sheets listed under other scales for more 1/32 scale sheets) 32001 Fighting Fulcrums (Nellis AFB F-16C) 32004 F/A18A/B Hornets VFC-12 Fighting Omars 32005 F-14A Splintered NSAWC Tomcats 32006 F-5E Tiger II VFC-13 Fighting Saints 32008 How’s My Driving? F-16C 32009 F-15E Strike Eagle Mountain Home Avengers 32011 SHWFOTS F-18C Hornets 32012 VFA-22 Fighting Redcocks F/A-18C 32013 KC and the Ragin’ Cajuns’ A-10A Warthogs 32014 VFA-25 Fis
-
I have two Monogram 1/48 AV-8B’s in the stash and as I am preparing to work on one of them I was wondering if it’s possible to make the other into a GR. 5 as they look very similar. Now I know the nose radome is different (which I have no clue how to rectify), there’s one more set of pylons compared to the AV-8B, and the instrument panel is different (was thinking the Airwaves PE could help with that) thatall need to be changed. Is there anything else that I missed? Is it even possible? I don’t have the budget to drop for another Hasegawa Harrier so I thought I
-
Selling the last released detailing sets of Metallic Details: Landing gears for aircraft model SR-71 Blackbird in scale 1/72 - $28.00 Set contains 25 resin parts, photoetching board (40*21 mm). Opened jet nozzles for aircraft model F-15 (Revell, Great Wall Hobby) in scale 1/48 - $25.00 Set contains 44 resin parts, photoetched parts (49*25 mm). Jet nozzles with external flaps for aircraft model F-15 (Revell, Great Wall Hobby) in scale 1/48 - $25.00 Set contains 10 resin parts, photoetched parts (49*25 mm).
-
Looking for an accurate aftermarket copy of the Stencil SEU-3/A ejection seat that was used by the USMC in the AV-8A's for my Monogram kit. I am fully aware there are several Stencel S-III-S (SJU-4) made in 1/48 and some manufacturers even advertise these as for the -A models however that is incorrect. Anyone have any ideas or should I just tinker with improving the kit seat?
-
Hi all! I present to you my latest project, the 1/48 Kitty Hawk Su-35S Flanker-E, "Red 08" in the unique Eggplant Dark Gray scheme of the Russian Air Force, circa 2014. This is really a great kit that has excellent fit almost everywhere, with the wing joins being the notable exception. The kit is not without other issues, however. The exhaust nozzles are molded in the straight position which would only be correct for a powered up machine, not drooped at rest. The stinger tail has flare boxes on the top, which is only correct for the prototypes and early production ai
-
I have accumulated a few pre war aircraft but had not built any due to the biplane configuration and rigging. I had tried to build the Classic Airframes F4B-4 a few years ago and it didn't go well because I had not considered the difficulty of doing the rigging in advance. I just followed the instructions (what are those). Fast forward a few years and I have figured out that you have to plan the rigging in advance. I have purchased many of Yellow Wing decals to get a lot of different markings options and a lot of yellow paint. I tried not to duplicate any color scheme and that is where t
-
Hi everyone! Back again after taking another break from building for awhile... So here is my latest completed project, the 1/48 Hasegawa F/A-18C Hornet in VFA-86 Sidewinders CAG markings circa 2006. I was drawn to the large orange diamond on the spine, much like the old A-7s of the same squadron in the late 70s, so I knew I had to build my first Legacy Hornet in those markings. Soon I will build a Corsair in the same "diamond spine" style markings. The decals I used are from Afterburner Decals "Snakes on a Plane" sheet. These performed flawlessly like usual. The ki
-
It's been a while since I posted anything. I have finished quite a few so I will start putting them up here. Here is the first. Monogram's B-25J Gunship version. Out of the box except for the decals which date back to the 1985 IPMS/USA national convention. The first decal (the red and white strip behind the green) started fracturing when I put it on the model so I sprayed the rest with a thin layer of lacquer to seal them up before dipping in water. It was also my first try at using acrylic paints instead of my trusty Model Master paints. Hope you like it.
-
This is from the ICM's set of luftwaffe winter pilot and field maintenance set #48086, enjoy
-
Hey all, I have the 'Nam Tour of Duty Skyraider and I want to model the famous Navy Toilet Bomber Skyraider, What mods, if any, do I have to make to make it the Navy version? I've looked online, and the aircraft look visually the same.. Any help would be appreciated Cheers, Ian
-
Some details of new PE set are installed on model. The set made of 0.05mm thick stainless steel and has many optional parts. ALM_3718 by Alexey Matvienko, on Flickr ALM_3717 by Alexey Matvienko, on Flickr ALM_3716 by Alexey Matvienko, on Flickr ALM_3715 by Alexey Matvienko, on Flickr ALM_3714 by Alexey Matvienko, on Flickr ALM_3720 by Alexey Matvienko, on Flickr ALM_3693 by Alexey Matvienko, on Flickr ALM_3694 by Alexey Matvienko, on Flickr ALM_3697 by Alexey Matvienko, on Flickr
-
Hi all! I am back after a bit of a break with my latest completed model, the 1/48 Special Hobby AJ 37 Viggen from 7 sqd of the Swedish Air Force. The kit is actually very nice to build, and has some really nice detail. There are a few errors in the kit, all of which are well known here and other sites. I myself was not too concerned with these issues, as they did not bother me, and by doing an in-flight build was able to avoid two of the bigger issues (canard flaps droop on the ground and way too thin wheels and tires). That also did not keep me from making some mist
-
Dear all when the MiG-21F-13 from Trumpeter was released, there was a thread here about it´s accuracy issues, IIRC. Using the search reveals nothing for me. Maybe I´m using the wrong key words. Does anybody has it still linked, or created it and can post the link? Many thanks, Thomas
-
Hi all! Here is my recently finished model - the infamous F-23A Black Widow II, as she could have look like if entering into serial production. 🙂 The weathering also features quite a significant amount of "what if", but for the conversion i used all the unclassified pics and diagrams on the www.yf-23.net website. I tried to make this kit as correct as possible while sticking to the mentioned dimensions, angles, etc. - all the changes from the prototype version YF-23. As a base kit - it is the HobbyBoss's 1/48 kit and here is the WIP topic. (PS: the pics on the first pages are invisible... don'
-
The beast has moveable landing gear and rudders 🙂 So this is the photoshoot only in a "parked" mod. Most of the pics are also on a direct sunlight, which helps make the Have Glass shines and reflections more pronounced. And of course - a big Thank you guys, for all the kindness, ideas and guidelines throughout this build! Here is the WIP topic and the "In-flight" Rollout. And now let's get started with some on-the-ground sillhouettes...
-
First post of a build on here, usually found over on Britmodeller so apologies if you have seen this one before. It an old ERTL kit, pretty much out of the box but with aftermarket decals as I wanted either Lakenheath or Woodbridge. Posed with a diorama And with some her RAF cousins
-
Looking to buy either one or both of the Libyan or Yemeni decals options from the two eduard su-22 kits in 1/48 scale. Will also buy the full kits. If anyone has those decals left over, I will gladly buy them. Kind regards -
Hi, I'm looking for my F-5 F AFV kit, decals of Aggressor squadron. Thanks a lot for help me. Cheers SPang
-
Heya everyone, As per usual, being a late comer to the hobby means i've missed out on a lot of stuff I actually need for builds... Anyhow, I'm after the Model Alliance MA 48109 decal sheet for Operation Telic Part 1. Even just the portion for the 12b Squadron Tornado GR.4 would be all I need as I can get the stencils elsewhere. Any help would be awesome... Many thanks, A -
Aeromaster 48-374, If not the entire sheet I'll take it for that specific bird. -Scott
