Search the Community
Showing results for tags 'eduard'.
-
Hello fellow modelers, This project had started from the April, but due to my limited time the progress was very slow and I didn't managed to post earlier. The kit I chose was Eduard's Fw 190 D-9 Late #8189 profi pack. I started assembling the first parts (cockpit, some gun bay parts, gears etc.) and then I continued with the priming. Afterwards I painted the cockpit and cockpits sidewalls with AK true metal silver, I used this layer as a base for the chipping. Then I painted using mostly AK's 3rd gen colors. Unfortunate
-
Hello, this Spitfire is my first complete build, I used it to gain some experience in airbrushing and basic techniques. For painting I used Humbrol Enamels (basic camo) and Tamiya and AK acrylics. For weathering I used Winsor & Newton and Abteilung oil paints (raw amber for fuel leaks, ivory black for smoke, dark rust for oil leaks and zinc white + raw umber for dust effect), also I used AK's paneliner for grey and blue camo (I know that looks overweathered but I had some accidents during masking). You can see that I tried some chipping (Never chip befor masking.....), for its base I used
-
Hello, I am new in scale modeling. I used this kit (Dual Spitfire Combo) to gain some experience in airbrushing and basic techniques (I had an accident with one of the roundels but actually looks good). For painting the PRU Spitfire I used Tamiya and AK 3rd gen acrylics (camo). For weathering I used Winsor & Newton and Abteilung oil paints (raw amber for fuel leaks, ivory black for smoke, dark rust for oil leaks and zinc white + raw umber for dust effect), also I used AK's paneliner for grey and blue camo. For the metallic base for chipping I used AK's true metal silver. I pre shaded the m
-
Hi guys Here I will post some photos from the Spitfires, I am currently building. I would like to ask for some advice, since these are my first builds (alongside with a F 16). Unfortunately, I don't have photos from the early stages. I used the Spitfires mostly to gain some experience using airbrush. For airbrushing I used a H&S Ultra airbrush, for the PRU schemed airplane I used AK's 3rd gen acrylics, while for the day fighter I used Humbrol Enamels. Both models were primed with Mr Surfacer 1200 and preshaded with black color, for the metallic base I used AK's True Metal Silve
-
I'm considering building an early, Cold War AH-64 using Monogram's old 1/48th scale kit. But this time around I'd rather not try to clean up Monogram's doughy, sink-marked AGM-114 Hellfire missiles. After some quick investigation, I think this Eduard kit can successfully represent early AGM-114s. Although it looks like I might have to use the Monogram rack and rails. Thoughts? Warnings? Advice?
-
This is my first plane in this forum. Made with Eduard MIG-21R kit and ModelMaker decal.
-
I have been considering a new project: I want to do Lt. Lochridge's F6F-3 (#117, "Lolly") as featured in the most recent release of the 1/48 Eduard kit. The deal is that I prefer to use the Hasegawa model. I was wondering if anyone has the decals left over that they would be willing to part with. I would appreciate it!
-
I have been considering a new project: I want to do Lt. Lochridge's F6F-3 (#117, "Lolly") as featured in the most recent release of the 1/48 Eduard kit. The deal is that I prefer to use the Hasegawa model. I was wondering if anyone has the decals left over that they would be willing to part with. I would appreciate it! (Also posted in buy/sell)
-
Hello, This is Eduard's Mig-21MF Profipack edition kit, built with some additional aftermarket goods (resin exhaust, external PE set), in Romanian AF markings. Very beginner friendly kit, goes together like a dream. Brush painted with various colors from AKAN, Ammo Mig and MRP aqua based paints. Apologies for my "potato camera" picture quality. Thanks for looking.
-
Hi there, I know, as if we're missing more '109s around here. But, for me, this one is special, my first motling attempt. I tried to be as close as possible to the manual and I'm happy with it. Hope you'll enjoy! This one was Oberleutnant Anton Hafner machine, in which he scored 204 kills and was, in turn, killed, when collided with the ground, while trying to evade his opponents. Cheers!
-
Finally I can post this build. The Eduard Ltd Edition Harrier GR 7 using the Hasegawa moulds and a spot of Eduard magic makes this kit one of my all time favourites: and I am honoured the build made it into November's issue of Airfix Model World. Here are a few more pics that didn't make it into the publication..
-
This is the quarter scale Phantom FGR 2 92Sqn special blue scheme by Hasegawa. Difficult and expensive to come by, but still the only one on the market. As always an excellent kit with few hangups. Extra detail was provided by eduard PE and resin. The base is home made. Built for one if the aircrew of this aircraft with only three training missiles. This aircraft is being restored at my local museum: Tangmere Military Aviation Museum.
- 15 replies
-
S&H is additional, paypal preferred, US only, please contact me directly at mholly_27@hotmail.com1/72 kits1. Hasegawa 00356 Kawasaki Ki-45 Kai with nose cannon, $152. Revell 03967 Mig-21F-13, $10 3. Italeri 047 Sukhoi Su-22M4, $9 4. R.V. Aircraft 72040 Mig-21bis "Over Europe", $15 5. Hobby Boss 87220 Mi-24V Hind E, $15 6. Trumpeter 01674 Mig-29A izdelye 9.12 started!-$35, includes Arma Hobby resin top intakes covers (installed), Arma Hobby resin exhaust nozzles, Eduard Brassin cockpit, Eduard Brassin wheels, Hobby Decal pitot tube,will provide more details and pictures upon request1/72
- 8 replies
-
- hasegawa
- rv aircraft
-
(and 2 more)
Tagged with:
-
I was in fifth grade when I got Bob Scott's God Is My Co-Pilot from the Scholastic Book Club and I resisted the urge to buy models with my allowance until I saved up enough for this kit: Spinning prop, opening canopy with pilot figure, retractable landing gear, moveable control surfaces-everything a 10 year old boy needs in a model aeroplane. I remember having it done in a day-no paint, plenty of glue, etc. Don't recall what happened to it but it still wears the crown of the coolest model I ever had when I was a kid. So let's fast forward to 2006 when I got it in my
-
Looking at one of the first kits I ever bought and one I have been wanting to do a video on for several years now with Eduard's 1/48th scale BF110G-2 kit.
-
OK let's start with this build Since the canopy will be closed, I've decided to go with the decals for cockpit. There's also an option to paint the lovely alternate plastic parts, full of tiny details which look really really good. a few pieces of the exhaust waiting to be put together... Simple trick for landing lights - use kitchen aluminum foil to cover the back of the light... ...effect will be like the real thing and better than any paint.
-
I have just received the brand new Eduard MiG-21MF in 1:72. Here's a link to my in-box review for those interested: https://vvsmodelling.com/2018/04/09/eduard-172-mig-21mf-library-edition/ I'll probably also start with the build along with the Mirage 4000.
-
Hey Everyone, It's been a while since I’ve posted anything. Here’s my first completion of 2018. A 1/144th Eduard MiG-21PFM of the Mongolian AF. I used a RetroWings resin cockpit and the PFM conversion from JBr Decals. Really easy and nice conversion, and I’ll build another since I’m not happy with how my paint finish turned out. First time posting an image since the whole PB issue...better pictures to come. John
- 3 replies
-
- eduard
- jbr decals
-
(and 1 more)
Tagged with:
-
The finished British Hellcat, few pictures along with a video of the build I have enjoyed building this great kit and I hope you enjoy watching as well. Don't be shy and leave your comment :) Best regards and happy modelling M.
-
Just finished this one! It's in 1/144 scale (yes! 1/144) from Eduard mig-21bis kit Here's the link to the modelling process: Bye Giovanni
-
I really REALLY want to get this stuff out of the house - I have realized that I'll just never get to it. Each of these items INCLUDES SHIPPING IN THE CONTIGUOUS 48 STATES! Let's get to the list: -Revell 1/72 Lancaster B.Mk.I/III complete kit with all parts still in the bags (no original box but everything will be carefully packed) Includes the following items- -Xtradecal X72062 Post-War Lancasters, Part 2 (Canada, Egypt, Argentina) -Aero Master 72-223 Lancaster Bombers at War Part 1 -CMK Q72047 Resin wheels -Quickboost 72021 Gun barrels
-
Eduard, Airwaves and True Details sets. PayPal in US only. Price includes postage. K-36 Ejection Seats. $8.00 F-7F Tiger at Wheel Set. $7.00 TBM-1C Photo Etch set. $10.00 SOLD F6F-3 Photo Etch set. $8.00
-
- true details
- airwaves
-
(and 1 more)
Tagged with:
-
I have the following kits for sale from Abilene, TX (79606). Since this is a purge, I am not interested in any trades other than a WingNut Wings Roland D.VIa (32022). All of my kits have all of the parts still attached to the sprues unless otherwise noted. I can accept money order or PayPal...'friends and family' is always appreciated but not required. HASEGAWA 1/32 N1K2-J Shiden-Kai "late" sealed (George) -- $42 REVELL 1/32 Hawker Hunter FGA Mk.9 -- $22 TRUMPETER 1/32 MiG-23MF Flogger B -- $82 EDUARD 1/48 MiG-21PFM -- $40