Search the Community
Showing results for tags 'black hawk'.
Found 4 results
Items are for sale or trade. Prices are very negotiable. Make me a reasonable offer and I'll probably take it. If you buy it, you pay postage. If we trade, we each pay our own postage. Will ship worldwide.I am motivated to move these items. Make me a reasonable offer and I will probably take it.Sale/Trade List. All are 1/35 unless otherwise noted.Academy:US Army UH-60A/L Package: $75 plus shipping - Academy UH-60A/L kit (box worn, some parts off sprues, but all there) with partial Army decals for Army specific markings and USAF MH-60G decals for common stencils (all stencils/decals complete) - Cobra Company H-60 Black Hawk Detail Set (352002)- Cobra Company Gunner's Side bulkheads and Seamless Intakes (included in later CC MH-60G sets)- Fab Resinworks H-60 transmission (FAB008)- Eduard UH-60A Interior PE (32575)- Eduard UH-60A Cargo Seatbelts PE (32578) - Eduard UH-60 Mask set (XL-047)- Resin cockpit and cabin floor made by someone here at ARC - Laser-cut plastic sheet that has ballistic panels for the floor and walls, and also internal structures for an exposed ceiling, made by someone here at ARCUS Army MH-60L DAP Package: $100, plus shipping - Academy AH-60L DAP kit (box worn, some parts off sprues, but all there)- Cobra Company H-60 Black Hawk Detail Set (352002)- Cobra Company Gunner's Side bulkheads, rear wall, and Seamless Intakes (included in later CC MH-60G sets)- Cobra Company 3500 round ammo cans- Fab Resinworks H-60 transmission (FAB008)- Eduard UH-60L Mask set (JX-028)- Eduard UH-60L Interior PE (32071)- Eduard UH-60L Exterior PE (32067- Resin cockpit and cabin floor made by someone at ARC - Laser-cut plastic sheet that has ballistic panels for the floor and walls, and also internal structures for an exposed ceiling, made by someone at ARC- Werner’s Wings Night Stalkers Part 1 Decals (WW Decals 35-03) MH/UH-60 Black Hawk detailing package: $35, plus shipping- Cobra Company H-60 Black Hawk Detail Set (352002) - Cobra Company HH-60G External Gun Mounts mixed set (1 x M134, 1 x .50 cal)- Cobra Company Gunner's Side bulkheads- Fab Resinworks H-60 transmission (FAB008)- Resin cockpit and cabin floor made by someone at ARC - 2 sets of laser-cut plastic sheet that has ballistic panels for the floor and walls, and also internal structures for an exposed ceiling, made by someone at ARCBlack Ops Models:AH-6M Rotor conversion (6 blade set) for H-6A/J $5Revell:1/32 UH-1D Crandall MOH Markings (rear seats added) $151/32Video Aviation:USAF Wheel Chocks (12043) $5US Navy MHU-191/M (130932) $8US Navy Deck Crew (Modern) (120322) $8 My want list for trades (will consider others as well):AFV Club M60A3 (35249)Bravo 6 Vietnam figuresDragonM67 Flame Tank (3584)Evolution Miniatures Modern FiguresHobby Fan:M983 HEMTT Crew (HF 736)Meng:USMC M1A1 AIM (TS-032)Reedoak:1/35 Helicopter crewmen and USN figuresRye Field Models:M1A1/A2 Full Interior (RM-5007) Will take interior parts onlyTakom:M9 ACE (2020)Trumpeter:CH-47D Chinook Helicopter (05105)M1120 LHS (01053)Valkyrie Miniatures Figures:Modern US Tank Crew (1970s Europe) (35017)Modern US Army Truck Driver & Crew M977 (35015)Modern US Army Driver Support Crew MRAP (35007)D9R Bulldozer Crew Set (35003)Modern US Army Tank Crew (1980s ERA) (35027)Thanks for looking.
Shipping is included to 48 continental states, at cost to any other place. 1/32: Tamiya Spitfire Mk. XVIe brand new kit in open box. Sold Revell/Monogram Hawker Hunter FGA9, kit is complete, some large parts are off sprue - $37. Cutting Edge R-13 Atoll missiles for MiG-21, CEC32071. Package contains 2 missiles, I used other 2 for my MiG-21 build. $12 Black Box/Avionix Su-27 Flanker Cockpit BLC32022/CS32022 - $26 Partial LindenHill Su-27UB Flanker Sparka decals. Sold 1/35: Academy/MRC UH-60L Black Hawk: open box, bags sealed - $45 1/48 Armory Su-34 wheels ARAW48025 - $18 Aires Kfir C2/C7 exhaust nozzle for AMK, 4734 - $17 Trade wants: 1/32 Trumpeter MiG-29C 1/32 ICM I-153 1/32 Academy F-16I or KF-16D 1/32 Tamiya F-16 / F-4E /EJ I do accept paypal and will combine shipping.
alright guys, I'm an engineer at Sikorsky and wanted a few accurate models for my desk....more specifically, a UH-60 and a CH-53E because those are the two aircraft I've spent most of my career on (really the UH-60M and CH-53K but I'm looking for closest variants). The selection of pre-built models is pretty crappy (wood, plastic, etc) and so is the accuracy so I decided to build some. So I wanted to build an H-60 and a 53e. I picked up a 1/72 italeri UH-60 Night Raid at my local hobby store and that was the first adventure. I then took to these forums to find a 1/72 Italeri CH-53E Super Stallion Kit, 1/72 Italeri CH-53J Pave Low kit, and a 1/48 Academy CH-53E kit (thanks guys!!!). My overall plan was this.... use the Black Hawk as the first model/guinea pig, then complete the other two 1/72 53 kits. I thought it would be really cool to have these in the same scale for my desk at work. From there, I would finally build the 1/48 CH-53EAcademy kit when I've had the most experience; I will also likely then pickup a 1/48 H-60 sea hawk kit to accompany the 53E in my home office. A couple of disclaimers before I get into this... I hadn't built a model since I was a kid so this was a learning experience. As of now, I'm not too worried with aging or weathering the paint. This is due to two main reasons... I deal spanky new aircraft as they leave our factory so it's more applicable to me and secondly it's just easier. As I said, these are my first serious models so maybe I'll try that on one of them eventually. Finally, all of the 1/72 kits will be painted with brushes and I will probably invest in an airbrush setup for the 1/48 kits. I'm mostly done with the 1/72 UH-60 now besides finishing the blades and some other paint touchup. I didn't take a ton of pictures but will on the next model. Seeing how this was the first, it was a huge learning experience for me and the second model is already coming along much faster, easier, and cleaner. I made some basic rookie mistakes on the Black Hawk such as glue on the clear plastic, some excess glue on seams, etc. Interior done and airframe halves test-fitted... Rotor head and exhaust ducts painted... Airframe joined and first coat of helo olive drab... to be followed by sanding and more paint... Here she is mostly done besides some paint touch up and remaining decals, the chin windows also need to be re-cleared after sanding glue off (waiting for future to arrive)... Now time to do the big brother...