David Walker Posted January 4, 2007 Share Posted January 4, 2007 (edited) Has anyone got / used the True Details cockpit for the Revellogram Hog? I'm interested in the quality of this. I picked one up a month or so ago and it looks great. Very well molded and the detail is very good. (as was mentioned above by Stephen) If it matters to you, it's configured as a pre-LASTE cockpit, but from what I've been told the modifications to make it a LASTE current cockpit aren't that difficult. Edited January 4, 2007 by David Walker Quote Link to post Share on other sites
sea-monkey Posted January 4, 2007 Share Posted January 4, 2007 Thanks for the info on the True Details pit - I'm planning to do a pre-LASTE version so that would work out fine. I'm hoping it will fit / can be made to fit the Italeri kit without too much trouble. Cheers. Quote Link to post Share on other sites
puffer Posted January 4, 2007 Author Share Posted January 4, 2007 Hello, I test fitted the Black Box pit to the Italeri kit and it works surprisingly well. Aaron Quote Link to post Share on other sites
polybebber Posted January 4, 2007 Share Posted January 4, 2007 Here's my solution if you have a Tamyia kit which will never be built: The diameter of the Tamyia fan blade is pretty much the same as the Italeri one. Just remove the outer plastic from the Tamyia part and remove the inner section of the Italeri intake... et voila (the Tamyia blades require only minimal trimming). Just a thought. Lothar Quote Link to post Share on other sites
Mike Stephens Posted January 5, 2007 Share Posted January 5, 2007 I just wanted to say a BIG THANKS to you Puffer, and all the contributors to this thread, for all your great work in critiquing this kit <_< You all have done a great job in going over all the concerns and finding ways of resolving those concerns; I'll be anxious to apply these fixes when the kit finally comes my way! Thanks again to all!!! Mike Quote Link to post Share on other sites
David Walker Posted January 16, 2007 Share Posted January 16, 2007 As a follow-up, I received my resin engine fans/ forward nacelles from Eric Mark today and they are fantastic looking. I can't wait to use them. And they are packaged with resin closed decellerons. For the price ($11.00 with shipping) they simply can't be beat. Quote Link to post Share on other sites
puffer Posted January 16, 2007 Author Share Posted January 16, 2007 Hi David, Glad to hear you're all sorted with the resin. So which kit are you going to build Italeri, or Monogram? Aaron Quote Link to post Share on other sites
David Walker Posted January 16, 2007 Share Posted January 16, 2007 I'll be building the Mongram one. Over the years I've collected enough stuff for it that I'm sure I've at least tripled the original price I paid for the kit. Now I just need to get it started. Quote Link to post Share on other sites
Style_Brazil Posted November 15, 2008 Share Posted November 15, 2008 (edited) Hi Guys, what would be the number of the Monogram kit, is this: MN05505? Thanks, Fabiano. Edited November 16, 2008 by Style_Brazil Quote Link to post Share on other sites
LZ82 Posted November 17, 2008 Share Posted November 17, 2008 (edited) All, For the absolute very best and a drop in replacement you have to get the Quickboost set, fan blades are all seperate, molding is sharp, price will run you about $9.00US...depending on the exchange rate. Also check out Spru Bros, going for $7.99US Don't believe me follow the link...oh QB is a splinter off Airies. Le Vander http://store.spruebrothers.com/shared/Stor...CS=sbm&All= http://www.quickboost.net/Obrazky/48173.jpg http://www.quickboost.net/ http://www.quickboost.net/catalogue.htm Edited November 17, 2008 by LZ82 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.