Miccara Posted October 27, 2009 Share Posted October 27, 2009 (edited) The step-by-step (sort of), guide. This documents a P47-D build. This is an edited and updated version of the article published on ARC, but with more photo's and the photo's spread out through the article. When you go to download the PDF it will ask you for a password; enter ... 151555 Most importantly... DO NOT CLICK on the big "DOWNLOAD Go right to the bottom of the page where it says "Save file to your PC: Download" , click on "Download". http://www.2shared.com/file/8704001/fd67e6...er-P47PDF1.html Larry Edited January 15, 2011 by Miccara Quote Link to post Share on other sites
toadwbg Posted October 27, 2009 Share Posted October 27, 2009 I have sent a copy of the PDF version of "P47-D, For the fun of it" build to Steve B. and he will be attaching it to the original article for download.I actually re-wrote it a little and inserted the photos throughout the article instead of all at the end. For those of you that have asked me for a copy of the article and can't wait for it to appear here… you can download it here: http://www.2shared.com/file/8704001/fd67e639/Master-P47PDF1.html'>http://www.2shared.com/file/8704001/fd67e639/Master-P47PDF1.html Download Password is 151555 Larry I tried cutting and pasting your above address but it didn't work for me, try this instead: http://www.2shared.com/file/8704001/fd67e639/ Thanks Larry- great article! Quote Link to post Share on other sites
Miccara Posted October 27, 2009 Author Share Posted October 27, 2009 I tried cutting and pasting your above address but it didn't work for me, try this instead: http://www.2shared.com/file/8704001/fd67e639/ Thanks Larry- great article! Hmmm? Interesting... it seems to work for me, but it might just be a browser thingy. Thanks for your help!! Quote Link to post Share on other sites
Simeon Posted October 27, 2009 Share Posted October 27, 2009 I finally got it. S- I attempted with both URLs and still cannot download it?how do you download it? S- Quote Link to post Share on other sites
Miccara Posted October 27, 2009 Author Share Posted October 27, 2009 (edited) Edited: no longer contained valid info Edited September 14, 2010 by Miccara Quote Link to post Share on other sites
Miccara Posted October 27, 2009 Author Share Posted October 27, 2009 | | | | | | | | | | | | | | | | | | | Push, push, push Just trying to cut down on the amount of emails for a copy of this... Quote Link to post Share on other sites
Miccara Posted October 28, 2009 Author Share Posted October 28, 2009 once more... Quote Link to post Share on other sites
mlicari Posted October 28, 2009 Share Posted October 28, 2009 Thanks for making this available! Mike Quote Link to post Share on other sites
doupnik Posted October 28, 2009 Share Posted October 28, 2009 I enjoyed your articles and I am really happy that you've provided them as pdfs. Thank you, mason Quote Link to post Share on other sites
Miccara Posted October 28, 2009 Author Share Posted October 28, 2009 Mike, Mason You're very welcome. Considering all I've received from the people on this site, I'm very happy to be able to give something back! Larry Quote Link to post Share on other sites
Blackcollar Posted October 29, 2009 Share Posted October 29, 2009 Can't download it no matter what I try... -Al Quote Link to post Share on other sites
Miccara Posted October 29, 2009 Author Share Posted October 29, 2009 Can't download it no matter what I try...-Al Hi Al, Sorry, you and a couple others have had a problem with this. I've tried several browsers and can't get it to NOT work! If you have an email account that can take a 12meg message, I will gladly email you a copy. Larry Quote Link to post Share on other sites
ReccePhreak Posted November 1, 2009 Share Posted November 1, 2009 I am attempting to download it now. That is one SLOW download site! I have high speed internet, with 20Mb/second download speed, but that site is downloading it at 17Kb/second. :o Larry Quote Link to post Share on other sites
shamael Posted November 12, 2009 Share Posted November 12, 2009 Hi Larry, just downloaded... I followed your great report on ARC site and your PDF version is even better. Thanks a lot, V from Rome - Italy Quote Link to post Share on other sites
Miccara Posted November 12, 2009 Author Share Posted November 12, 2009 (edited) Hi Larry,just downloaded... I followed your great report on ARC site and your PDF version is even better. Thanks a lot, V from Rome - Italy My pleasure! ...and thank you very much for the compliment! :clif: Edited December 17, 2009 by Miccara Quote Link to post Share on other sites
gotarheelz14 Posted December 6, 2009 Share Posted December 6, 2009 This website sucks. Gives me errors on the page every time I try to download it. I loved your guide man but I cannot get this to work!!! My computer is about 5 months old too and with all updates and everything. GRRRRRR Quote Link to post Share on other sites
Miccara Posted December 9, 2009 Author Share Posted December 9, 2009 This website sucks. Gives me errors on the page every time I try to download it. I loved your guide man but I cannot get this to work!!!My computer is about 5 months old too and with all updates and everything. GRRRRRR Yes, I agree it sucks! I'm looking for another option. In the meantime, make sure you're clicking on the "Click Here" phrase not the "Save File" Quote Link to post Share on other sites
MarcusW Posted January 6, 2010 Share Posted January 6, 2010 (edited) After reading that article, I just had to register on the forum to say that it was a joy to read! It reads like a good book and you have a great tounge-in-cheek sense of humor. Made me laugh out loud :lol: You obviously is an experienced builder and it shows, everything looks so easy and "classy". I have been building for a bit over a year now, after a healthy break of 18 years... I love the tip about masking and painting the canopy, the depth of masking the inside really justifies the extra work. Also the technique of masking behind the cockpit cutting out a mask from the canopy was a godsend. I have a 1/32 scale F-16 to build and the cockpit back part is similar to this, now I have a nice technique to use for painting that section. Great stuff and thanks for making it available for download! //Marcus Edited January 6, 2010 by MarcusW Quote Link to post Share on other sites
Miccara Posted January 6, 2010 Author Share Posted January 6, 2010 After reading that article, I just had to register on the forum to say that it was a joy to read! :unsure: It reads like a good book and you have a great tounge-in-cheek sense of humor. Made me laugh out loud :lol:You obviously is an experienced builder and it shows, everything looks so easy and "classy". I have been building for a bit over a year now, after a healthy break of 18 years... I love the tip about masking and painting the canopy, the depth of masking the inside really justifies the extra work. Also the technique of masking behind the cockpit cutting out a mask from the canopy was a godsend. I have a 1/32 scale F-16 to build and the cockpit back part is similar to this, now I have a nice technique to use for painting that section. Great stuff and thanks for making it available for download! //Marcus Thanks for the great comments Marcus. I tried to make it as amusing as I could. You'll find ARC to be a great source of help and information. Enjoy! Quote Link to post Share on other sites
Rattler Posted January 19, 2010 Share Posted January 19, 2010 Larry, Just found your artical and WOW... stunning jug you did for it... I've never tried the foil tech before, but reading your artical and seeing it done.... I'm game to give it a shot now... I mostly do armor stuff an figures few AC now an then... but nothing like what you put out. Outstanding job... I hope you do more articals like this one. V/R Chris aka Rattler Quote Link to post Share on other sites
Miccara Posted January 20, 2010 Author Share Posted January 20, 2010 Larry,Just found your artical and WOW... stunning jug you did for it... I've never tried the foil tech before, but reading your artical and seeing it done.... I'm game to give it a shot now... I mostly do armor stuff an figures few AC now an then... but nothing like what you put out. Outstanding job... I hope you do more articals like this one. V/R Chris aka Rattler Thanks Rattler! All kidding aside... foiling is easier than painting, once you get past the fear factor. Give it a shot. There is an article in the Gallery section (link below), that I wrote about the first foil job I did. It might help a bit and I've learned a few extra things since then, but still it covers a few things. Let me know how it turns out! http://www.aircraftresourcecenter.com/Gal5...9_Shred/00.shtm Quote Link to post Share on other sites
Rattler Posted January 20, 2010 Share Posted January 20, 2010 Awesome artical Larry!!! super looking B-29 I've got a mustang.. think I'll give that a go this weekend while glue/paint dry... thank you again for the link an the encouragement!!! Chris Quote Link to post Share on other sites
Oroka Posted January 21, 2010 Share Posted January 21, 2010 Wow! Thanks for this great tutorial! I especially like the painting aspect... I bought a airbrush a few years ago, but never got into using it. I am 75% done building a desktop paint booth, and have a model nearly ready to paint, your tutorial has taken alot of the questions out of the process (though I am sure I will screw lots up in the learning experience). Again, thanks! Quote Link to post Share on other sites
Miccara Posted January 21, 2010 Author Share Posted January 21, 2010 Wow! Thanks for this great tutorial! I especially like the painting aspect... I bought a airbrush a few years ago, but never got into using it. I am 75% done building a desktop paint booth, and have a model nearly ready to paint, your tutorial has taken alot of the questions out of the process (though I am sure I will screw lots up in the learning experience).Again, thanks! My pleasure! Let me know how the airbrushing experience works out. Quote Link to post Share on other sites
The_Animal Posted February 22, 2010 Share Posted February 22, 2010 (edited) Managed to download it off the original site you posted it onto, Larry. Looks great. I'm going to take some time and read it. It'll give me inspiration to crack open one of my kits and start working on it. Addendum: Read the article. Absolutely terrific, gets right into the nitty gritty of the basics of building. Thanks for taking the time to write that. Edited February 22, 2010 by The_Animal Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.