Andre Posted May 27, 2010 Share Posted May 27, 2010 (Warsaw Pact pilot, all three airbrakes can be lowered unlike on the Fujimi kit,...) Aren't the airbrakes on the MiG-21 of an interlinked configuration so that they can only deploy all three at the same time, so having either just the front pair or just the rear one deployed would be inaccurate..? Cheers, Andre Quote Link to post Share on other sites
dawestsides Posted May 27, 2010 Share Posted May 27, 2010 ICM MiG-25 FTW Quote Link to post Share on other sites
Laurent Posted May 27, 2010 Share Posted May 27, 2010 Aren't the airbrakes on the MiG-21 of an interlinked configuration so that they can only deploy all three at the same time, so having either just the front pair or just the rear one deployed would be inaccurate..? For me: - if there's nothing under the fuselage (fuel tank, gun or recce pod), the three airbrakes are used - if there's an under fuselage tank or a pod, only the front airbrakes can be deployed and rear one is locked shut The option offered by Fujimi doesn't exist. Someone like Piotrek S could confirm or infirm this. Quote Link to post Share on other sites
Laurent Posted May 27, 2010 Share Posted May 27, 2010 (edited) I would suggest to stay away from ALL Fujimy and Hasegawa kits of Russian/Soviet subjects.... MiG-23 and MiG-27 go for Zvezda ... I disagree here. Zvezda completely messed up the canopies of both kits and the whole nose of the MiG-27. MiG-27 Real plane: Indian MiG-27, Airliners Model: Zvezda MiG-23 Real world:Airliners Model: Zvezda Edited May 27, 2010 by Laurent Quote Link to post Share on other sites
Flankerman Posted May 27, 2010 Share Posted May 27, 2010 Amodel - all one word, no space, no hyphen, no capital A capital M etc etc........ I don't think it 'means' anything - probably just named to be first in any list..... A Ukrainian company that makes a range of injection-moulded kit that no other company would touch - including a lot of Soviet types. They are limited-run, low-pressure moulds and as a consequence, have large sprue gates which means that the rib joining the sprue (runner) to the actual part is thicker than the moulded part. So every part has to be cleaned up to remove the 'rib' after you have snipped it off the runner. The parts are also sometimes 'indistinct' - i.e. not as precise, lacking dead flat sides and sharp corners and sometimes have flash on them. But some of the tiniest parts are superb - giving the smallest detail (when cleaned up). And.... each new release gets better and better - their new White Knight & Spaceship One is a delight.... As you can tell, I am a big fan - because they do all the subjects I am interested in. Sure, they need a bit of work (its called modelling), but they are accurate and prolific in their coverage of Soviet subjects. Ken Quote Link to post Share on other sites
Balls Buster Posted May 27, 2010 Share Posted May 27, 2010 I disagree here. Zvezda completely messed up the canopies of both kits and the whole nose of the MiG-27. - True, but considering the options (Academy or Hasegawa) they are still much much better bet! OH - BTW Su-25 both Zvezda and KP are incorrect, I personally, chose Zvezda, but the amount of work on changes badly required is probably the same. Quote Link to post Share on other sites
Laurent Posted May 28, 2010 Share Posted May 28, 2010 Su-25 both Zvezda and KP are incorrect, I personally, chose Zvezda, but the amount of work on changes badly required is probably the same. Could you please explain us what is wrong with the KP kit (appart from the raised panel lines and lack of detailing) ? Perhaps in another topic ? Quote Link to post Share on other sites
Antonov Posted May 28, 2010 Share Posted May 28, 2010 MiG-23 and MiG-27 go for Zvezda Depends on what generation MiG-23/27 you're looking for. There was some article here not long ago that debunked the myth that the Hasegawa -23 is a terribly inaccurate kit. It's not perfect (what is?), but it's a pretty dang accurate first-generation Flogger. The Hasegawa -27 is also a an early version. Also pretty accurate for what it is. For later Floggers, go Zvezda. Quote Link to post Share on other sites
thegoodsgt Posted May 28, 2010 Share Posted May 28, 2010 Here's what I refer to as "The Definitive Discussion on the MiG-23" here on ARC. http://www.arcforums.com/forums/air/index....howtopic=103112 Quote Link to post Share on other sites
mbittner Posted May 28, 2010 Share Posted May 28, 2010 Amodel - all one word, no space, no hyphen, no capital A capital M etc etc........So every part has to be cleaned up to remove the 'rib' after you have snipped it off the runner. Ken, if you don't mind, I would like to disagree here. Everytime I've tried to snip parts off Amodel trees, I end up removing material from the part being snipped from the tree. Instead, I've found it best to use a razor saw (like the JLC one) to remove parts from Amodel trees. Sure you'll have more sanding, but in my experience you won't have to re-add material taken from the part when snipped. I hope that makes sense. Quote Link to post Share on other sites
olemanjoe Posted May 28, 2010 Share Posted May 28, 2010 Fujimi MiG-21s are nice little kits indeed but the Zvezda Bis kit (I'm not happy with the PFM kit) is:- cheaper (in Europe at least) - more accurate in shape - more detailed (detailed cockpit side walls for example) and detailing is accurate (Warsaw Pact pilot, all three airbrakes can be lowered unlike on the Fujimi kit,...) - as easy to build (except for a few small parts) For these reasons, if someone wants to buy a 1/72 MiG-21 bis kit, I believe that the Zvezda kit is the way to go. If you already have the Fujimi kit, I'd say build it and forget about accuracy as it's hopeless in this area. Laurent, I am depressed now, what am i gonna do with my three Fujimi Mig21s????? You want to send me a Zvesda Mig 21 to me in australia? In return, I can send you one of my spare Fujimi ones hahaha! regards, Ol Quote Link to post Share on other sites
Laurent Posted May 28, 2010 Share Posted May 28, 2010 I am depressed now, what am i gonna do with my three Fujimi Mig21s????? Shut down the "rivet counting" lobe of your brain (if you have one) and build them OOB ! Again they are very nice kits so very relaxing to build. Oh there are at least two things better in the Fujimi kits: - the panel lines are sharper - the landing gear leg wells have some ribing in tem; they're smooth in the Zvezda kits You want to send me a Zvesda Mig 21 to me in australia? In return, I can send you one of my spare Fujimi ones hahaha! Dream on dude :) Quote Link to post Share on other sites
Piotrek.S. Posted May 28, 2010 Share Posted May 28, 2010 As we speak about Fishbed`s airbrakes. Underbelly pylon has a microswitch and if you hang something there it cut off rear airbrake. List is very short: 490 l tank, 800 l tank, SPS-141 ECM pod, nuke. Wait I heard that also one H-66 agm fits there. And of course pods D & R (under recce Fishbeds). Quote Link to post Share on other sites
Laurent Posted May 28, 2010 Share Posted May 28, 2010 Everytime I've tried to snip parts off Amodel trees, I end up removing material from the part being snipped from the tree. Instead, I've found it best to use a razor saw (like the JLC one) to remove parts from Amodel trees. Sure you'll have more sanding, but in my experience you won't have to re-add material taken from the part when snipped. I hope that makes sense. I'm not sure if this tip has to be applied on all Amodel kits. The old ones had huge sprue gates but the situation is different now. Also jet kits and WWII or between-wars kits are not tooled by the same people. Detailling of the laters is far better. Quote Link to post Share on other sites
Laurent Posted May 28, 2010 Share Posted May 28, 2010 As we speak about Fishbed`s airbrakes. Underbelly pylon has a microswitch and if you hang something there it cut off rear airbrake. List is very short: 490 l tank, 800 l tank, SPS-141 ECM pod, nuke. Wait I heard that also one H-66 agm fits there.And of course pods D & R (under recce Fishbeds). And GP9 gun pod ? Quote Link to post Share on other sites
Flankerman Posted May 28, 2010 Share Posted May 28, 2010 I'm not sure if this tip has to be applied on all Amodel kits. The old ones had huge sprue gates but the situation is different now. Also jet kits and WWII or between-wars kits are not tooled by the same people. Detailling of the laters is far better. I have adopted a technique of first thinning down the thick gate before cutting the moulded part from the sprue (runner) This is an example of what I mean by the gate being thicker than the molded part..... This is what I do.... I haven't had Matt's experience of tearing the moulded part - maybe different mouldings as Laurent says ??? Sorry for going OT..... Ken Quote Link to post Share on other sites
Piotrek.S. Posted May 28, 2010 Share Posted May 28, 2010 And GP9 gun pod ? True, true, GP-9 under PF and PFM. Fujimi`s Fishbed is looking quite good. If you are desperate to make some improvment, there are few resin sets from Quickboost. Even a spine with tail propper to MF version. IMHO Su-15 from Trumpeter and MiG-15 from HobbyBoss are quite good. Quote Link to post Share on other sites
model_madness Posted May 29, 2010 Author Share Posted May 29, 2010 So any1 got any of these kits they would like to sell? I'm in UK, but if there are a few from same person selling the postage should come down at least. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.