F4DPhantomII Posted September 15, 2010 Share Posted September 15, 2010 From the gallery view today,it looks close to US Army cockpit green.How close is it? Quote Link to post Share on other sites
vince14 Posted September 15, 2010 Share Posted September 15, 2010 Sadly it's not an easy question to answer, as interior colours varied depending on which company actually manufactured the aircraft. Check out the J-Aircraft Forums for more help. Vince Quote Link to post Share on other sites
sakai Posted September 15, 2010 Share Posted September 15, 2010 From the gallery view today,it looks close to US Army cockpit green.How close is it? A6M3 was manufactured exclusively by Mitsubishi. Their typical interior color was medium olive green around FS34095 or 34098. HTH Mario Quote Link to post Share on other sites
F4DPhantomII Posted September 16, 2010 Author Share Posted September 16, 2010 While at localhobby shop today I saw a bottle of Tamiya XF 71 cockpit green (52).What is this color intended for? Quote Link to post Share on other sites
toadwbg Posted September 16, 2010 Share Posted September 16, 2010 XF-71, yes. That's what I use. After a good wash and a little highlights I dare anyone to argue your choice. Quote Link to post Share on other sites
sakai Posted September 16, 2010 Share Posted September 16, 2010 While at localhobby shop today I saw a bottle of Tamiya XF 71 cockpit green (52).What is this color intended for? It was meant for Zero but unfortunately doesn't match current research. It's too green or i.o.w. not enough olive. Quote Link to post Share on other sites
Derek Brown Posted September 18, 2010 Share Posted September 18, 2010 Here's a piece of original cockpit floor from an A6M3 being restored for flight (using the original Sakae 21!) BUFFIE www.buffiesbest.com Quote Link to post Share on other sites
Expat Tomcat Posted September 18, 2010 Share Posted September 18, 2010 If you have determined that XF-71 is too green or not olive enough. You can mix in some red to olive it up a bit. I'd add a tiny amount of white as well because green and red are complimentary colors on the color wheel and will make a shade. Adding a wee bit of white will brighten it back up and make it closer to what you're trying too achieve. Quote Link to post Share on other sites
EZhotshot511 Posted September 18, 2010 Share Posted September 18, 2010 (edited) XF-71, yes. That's what I use.After a good wash and a little highlights I dare anyone to argue your choice. Ditto. BTW that zero restoration looks awesome! Do you know where that is being done? Edited September 18, 2010 by EZhotshot511 Quote Link to post Share on other sites
shinai Posted September 18, 2010 Share Posted September 18, 2010 XF-71, yes. That's what I use.After a good wash and a little highlights I dare anyone to argue your choice. In a twist of irony I just finished spraying the cockpit of my new build with the XF-71. Mr. Color does sell the various colors for each manufacture, but from my understanding you can't get it in the U.S. any more - or is this just for the Gunze specific paints. From what I remember being in Japan and the planes I saw there this is pretty close. IMO, I stopped beating my self over getting the exact shade since there is such variation in getting the exact perfect color. Quote Link to post Share on other sites
toadwbg Posted September 19, 2010 Share Posted September 19, 2010 From what I remember being in Japan and the planes I saw there this is pretty close. IMO, I stopped beating my self over getting the exact shade since there is such variation in getting the exact perfect color. BINGO ;) Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.