B-17fan Posted January 17, 2011 Share Posted January 17, 2011 With careful sanding it's possible to thin and mount the framed waist window on the fuselage as it should be instead of in the recess. I reduce the miss-match at the lower wing/fuselage joint by gluing in a piece that closes the gap. I made a fixture to scrape in wing vents, if applicable and use a 6 inch steel rule as a guide when opening the wing vents. Quote Link to post Share on other sites
Prop Duster Posted January 18, 2011 Share Posted January 18, 2011 Too Good! this is going into my "when I get one of these, I'll do that" file. Thanks Quote Link to post Share on other sites
Kostucha Posted January 18, 2011 Share Posted January 18, 2011 Thanks for posting thus up! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.