skyarc Posted March 27, 2011 Share Posted March 27, 2011 I have the AZ issued of the DC-9 and want to build a Navy C-9B using Draw Decals. I would appreciate any input on building the kit or if any conversion needs to be incorporated to make it a C-9B. Thanks Quote Link to post Share on other sites
swallows Posted March 29, 2011 Share Posted March 29, 2011 Hello, I have the Fly DC-9 kit which, as far as I know, is the same plastic as the AZ one. It represents a DC-9-30 so you don't need any special modifications to make it a C-9B. There are only two things to watch for: first check if the airframe you want has this flat antenna in the tailplane fairing. Secondly the DRAW sheet is probably tailored on the Airfix kit which is slightly shorter than the Fly one: this may cause some problems with the fuselage cheatline... It's a pity you haven't this kit which offers all you need in one box. Hope this helps. Fabio Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.