Jump to content

1/32 F-4J VF-84 with Carrier deck tractor


Recommended Posts

Hello,

This 1/32 F-4J is my latest build.

I used many eduard's products on this plant.

8072378215_80d3592688_c.jpg

F-4J_VF84_3 by Bear Lee, on Flickr

8072372582_e24c5ca1be_c.jpg

F-4J_VF84_4 by Bear Lee, on Flickr

8072373084_21b4fc57f4_c.jpg

F-4J_VF84_6 by Bear Lee, on Flickr

8072373526_94f3802def_c.jpg

F-4J_VF84_9 by Bear Lee, on Flickr

8072380095_448d4002ac_c.jpg

F-4J_VF84_13 by Bear Lee, on Flickr

8072374902_37887346f4_c.jpg

F-4J_VF84_17 by Bear Lee, on Flickr

8072375906_2323517dfe_c.jpg

F-4J_VF84_21 by Bear Lee, on Flickr

8072383649_559b7277b2_c.jpg

F-4J_VF84_31 by Bear Lee, on Flickr

8072383779_933a9f4eba_c.jpg

F-4J_VF84_32 by Bear Lee, on Flickr

8072384103_42a675511d_c.jpg

F-4J_VF84_34 by Bear Lee, on Flickr

More pictures are here.

http://www.flickr.com/photos/crazybear1217/sets/72157631734072229/

Any comment and advice will be welcome!

Enjoy!

Bear

Link to post
Share on other sites

Beautiful build, Crazybear. The tractor is great too. How about put some Navy figures on the deck? I can’t wait to see your next project, looks like a super huge project.

Link to post
Share on other sites

Hello,

This 1/32 F-4J is my latest build.

Any comment and advice will be welcome!

Enjoy!

Bear

Beautiful F-4J! Only one nit (since you asked) which isn't your fault, is that the wing tip dihedral is too high at about 25 degrees, when it should be about 1/2 of that at 12-13 degrees. It's a pain to fix, but on your next Phantom, you might consider knocking it down a few degrees.

Really nice painting and finish! :thumbsup: :thumbsup: :thumbsup:

Link to post
Share on other sites

Beautiful F-4J! Only one nit (since you asked) which isn't your fault, is that the wing tip dihedral is too high at about 25 degrees, when it should be about 1/2 of that at 12-13 degrees. It's a pain to fix, but on your next Phantom, you might consider knocking it down a few degrees.

Really nice painting and finish! :thumbsup: :thumbsup: :thumbsup:

Thanks for the information!

I did not fix the wing tips. I just used clear tape to stick the wing tips and the main wing, because it is convenient for me to move this model if I move back to Taiwan in the future.

I can still try to fix it! :thumbsup:

Link to post
Share on other sites

Thanks for the information!

I did not fix the wing tips. I just used clear tape to stick the wing tips and the main wing, because it is convenient for me to move this model if I move back to Taiwan in the future.

I can still try to fix it! :thumbsup:

Perfect! To get the tips to lie down lower, you cut and trim the hinge line at the bottom until it settles down at about 12-13 degrees. With your wing tips already off, this should be a breeze. :thumbsup:

Edited by chuck540z3
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...