durangokid Posted September 24, 2014 Share Posted September 24, 2014 What about 1/32 GBU-12's? Would those be difficult to make? I build mainly 32nd scale and there are no accurate GBU-12's that I can find. All the kit ones are lacking in detail to say the least. They are one of the most used weapons on modern aircraft and I know I would buy a lot of them. Thanks for your consideration, Bryan Quote Link to post Share on other sites
Hornet78 Posted February 20, 2015 Share Posted February 20, 2015 Another suggestion. A 32nd conversion for the SU- 30 MKK to a MKI.... Jim Quote Link to post Share on other sites
otis252 Posted February 21, 2015 Share Posted February 21, 2015 Please do the A-7D/E correction/update set again. Chuck Quote Link to post Share on other sites
Allbann Posted March 3, 2015 Share Posted March 3, 2015 How about a flight stand for modern 1/32 jets? Quote Link to post Share on other sites
dsahling Posted March 5, 2015 Share Posted March 5, 2015 1/32 su-34 conversion.... Quote Link to post Share on other sites
balls47 Posted August 23, 2015 Share Posted August 23, 2015 Hey Chris, Any idea when you might come out with the MCID (big-mouth) intake correction for the 1/32 Academy F-16C kit? Like several others, I have one on the back burner. As you know, the MCID intake with the kit is absolutely horrendous. I know that I've mentioned this before, along with some others. Any idea when you might get this piece out? (ballpark will do, if possible) Thanks Chris. Take care and be safe, Tim Quote Link to post Share on other sites
Dimosthenis Posted November 7, 2015 Share Posted November 7, 2015 I'd like to second the RF-8 Conversion and MiG-29UB cockpit previouskly suggested and add my .02 :) F-4 Pylons A-7 Exhaust/Aft Fuselage correction A-7 Pylons (the last two hopefully to complement the possible re-issue of the A-7 set, one of which I am extremely lucky to have) Quote Link to post Share on other sites
Frank Wouts Posted May 6, 2016 Share Posted May 6, 2016 I was saving money for all your superb Su-27 sets. End of May we receive our holidays extra earnings, so I was about to order the Trumpeter kit and all your sets, when reading the canopy set being sold out and disconinued. Too pitty, because without the corrected canopy, the Trumpeter kit does not even look as a Su-27 and is not worth building. Also, what's the use of your other superb sets without the canopy set? So my suggestion is reissuing the Su-27 1:32 Canopy set. Quote Link to post Share on other sites
Frank Wouts Posted May 6, 2016 Share Posted May 6, 2016 (edited) Hey Chris, Any idea when you might come out with the MCID (big-mouth) intake correction for the 1/32 Academy F-16C kit? Like several others, I have one on the back burner. As you know, the MCID intake with the kit is absolutely horrendous. I know that I've mentioned this before, along with some others. Any idea when you might get this piece out? (ballpark will do, if possible) Thanks Chris. Take care and be safe, Tim I agree on this one, an MCID intake, for both Academy AND Tamiya... An NSI for Tamiya would be welcome as well, as would be a MLU set for an F-16A MLU for all European NATO countries with the F-16A MLU. Edited May 6, 2016 by Frank Wouts Quote Link to post Share on other sites
f5guy Posted February 13, 2017 Share Posted February 13, 2017 On ‎6‎/‎21‎/‎2013 at 7:06 AM, Scot M said: Chris, Would you please consider a set of seamless intakes for the Tamiya 1/32 F-14? I'm not interested in buying the Trumpeter kit after all of the money I have invested in aftermarket stuff for the Tamiya kit.What do you think?  Yup, I'd be down for a set of these too ;0) Fred K. Quote Link to post Share on other sites
Timvkampen Posted February 13, 2017 Share Posted February 13, 2017 The F-14 Trumpeter and Tamiya suggestions I support. Also: improvements for the Tamiya Viper kits or conversion sets to make A/B models. Quote Link to post Share on other sites
scotthldr Posted February 14, 2017 Share Posted February 14, 2017 If you do 1/48 stuff how about a correction set for the front fuselage of the HB TA-7C/A-7K? Quote Link to post Share on other sites
Raccoon139 Posted March 21, 2017 Share Posted March 21, 2017 remaining F-16 intakes for Tamiya and Academy for sure  I hope Chris and his family are doing well Quote Link to post Share on other sites
Zdenek Posted September 12, 2017 Share Posted September 12, 2017 1/32 Trumpeter - Su-30sm, canopy + frame, wheels... 1/32 Trumpeter - Su-25k,ubk canopies (both are terrible), main pylons, air intakes (wrong shape) Quote Link to post Share on other sites
Alpagueur Posted September 13, 2017 Share Posted September 13, 2017 e corrected nose for the Trumpy A-10 Quote Link to post Share on other sites
tom-navy-cat Posted October 10, 2017 Share Posted October 10, 2017 Hi Chris Maybe you could do a Canopy set for the 1/32 Tamiya Tomcat....That thing is such a Thick lump of distortion and in starving need of some nice details Quote Link to post Share on other sites
Timvkampen Posted October 11, 2017 Share Posted October 11, 2017 8 hours ago, tom-navy-cat said: Hi Chris Maybe you could do a Canopy set for the 1/32 Tamiya Tomcat....That thing is such a Thick lump of distortion and in starving need of some nice details Good idea!!! Quote Link to post Share on other sites
David.D Posted June 26, 2018 Share Posted June 26, 2018 Su-22M3 tailpiece and fin in 1/48 Quote Link to post Share on other sites
Zactoman Posted June 29, 2018 Author Share Posted June 29, 2018 On 6/26/2018 at 11:51 AM, David.D said: Su-22M3 tailpiece and fin in 1/48 Which kit and what is wrong with it? I'm not familiar... Â Quote Link to post Share on other sites
David.D Posted June 29, 2018 Share Posted June 29, 2018 3 hours ago, Zactoman said: Which kit and what is wrong with it? I'm not familiar...  The new kitty hawk kit. From the box one can only build the Soviet Su-17M3 poweredby the Al-21 engine.  The export Su-22M3, used by e.g. Peru, Libya, Syria, Iraq, Afghanistan, North&South Yemen, has the R-29 engine. This leads to a tail section with slightly larger diameter, different air scoop placement and a slightly more ‚rectangular‘ fin. Quote Link to post Share on other sites
Zactoman Posted June 29, 2018 Author Share Posted June 29, 2018 2 hours ago, David.D said: the Al-21 engine. the R-29 engine. Oh, you're talking about a full-on, big-league conversion kit. Sorry, but I know if I started this somebody (KH?) would release the Su-22M3 kit as soon as I release it, if not just before.  Quote Link to post Share on other sites
Mstor Posted June 30, 2018 Share Posted June 30, 2018 (edited) 19 hours ago, Zactoman said: Oh, you're talking about a full-on, big-league conversion kit. Sorry, but I know if I started this somebody (KH?) would release the Su-22M3 kit as soon as I release it, if not just before. Â KH did release a Su-22M3/4 kit but as far as I know they used the same molds as the Su-17 kit. Edited June 30, 2018 by Mstor Quote Link to post Share on other sites
Tomcat124 Posted November 29, 2018 Share Posted November 29, 2018 On 2/25/2014 at 3:10 PM, Alpagueur said: I suggest a pair of F-14 flapped/slatted wings (with opened spoilers) in 1/32 scale... Teknics had promised them (many time ago) but never realized and Trumpy wings are greatly simplified best regards I would be down for these as well. I've tried scratch building them and failed miserably (not to mention ruined a kit).  Quote Link to post Share on other sites
Alpagueur Posted December 5, 2018 Share Posted December 5, 2018 we absolutely need them Tomcat124....hoping Chris was hearing us.... Quote Link to post Share on other sites
SinisterVampire319 Posted May 4, 2019 Share Posted May 4, 2019 How about the exhaust cans for the new 1/144 Academy B-1B kit. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.