catfan Posted September 30, 2013 Share Posted September 30, 2013 so thanks to one of the newer fine scale modeler magazines that had a interview with a company called click2detail.com which is a company that makes model parts using 3d printing. i will be making threw them conversion parts so model builders can build there own RENO air racers so that means the red Barron rb-51 mustang strega voodoo dago red and the other mustangs pulse parts to turn any f8f-2 bear cat in to rare bear or conquest 1 or any of the other bear cat racers. and for u sea fury fans i will be making parts for September fury and also dreadnaught and the only planes the would be there own kits would be miss Ashley2 tsunami and the pond racer no i will be making these in 1/48 for now but if they sell really good then ill offer my conversions in other scales so i need feed back what dose every body think of this idea?? and my stuff will be better than the high planes kits Quote Link to post Share on other sites
pookie Posted September 30, 2013 Share Posted September 30, 2013 I couldn't read or make sense of what you ... wrote. Quote Link to post Share on other sites
catfan Posted September 30, 2013 Author Share Posted September 30, 2013 ok so what i will be making are 3d printed parts so people can build any air racing plane out there from sterga to voodoo to rare bear and all of the others i will even be doing models for sale of the miss Ashley2 the pond racer and even tsunami i am starting out in 1/48 scale and will go to other scales also so what dose every body think about the idea? i will be posting pictures of the parts once i have them Quote Link to post Share on other sites
jester292 Posted September 30, 2013 Share Posted September 30, 2013 Punctuation and better grammar will help sell your product more effectively. Aaron Quote Link to post Share on other sites
Julien (UK) Posted September 30, 2013 Share Posted September 30, 2013 Guys maybe a little unkind there. I understood the first post. While it may have been a little hard going it was not that difficult. Give the guy a break English may or maynot be the guys first language. Catfan good luck. Julien Quote Link to post Share on other sites
HOLMES Posted September 30, 2013 Share Posted September 30, 2013 (edited) This is what he is talking about.. Check out their ten pages on BROWSE section... https://click2detail.com/ https://click2detail.com/content/about-us https://click2detail.com/content/cad-design-service https://click2detail.com/most_wanted.php This might give you a better idea what caftan us trying to say, tell us. Edited September 30, 2013 by HOLMES Quote Link to post Share on other sites
Wayfarer 30 Posted September 30, 2013 Share Posted September 30, 2013 Wonderful idea Catfan!! I like the concept and I have considered something similar in the recent past, but have been held back by costs of equipment. I like the idea of Being able to store all cad files and not have a single part produced til ordered. Also, imagine creating your own parts and sets!! I know some members enjoy this already but WOW! Aside from model kits, the possibilities are endless with a 3d printer. Thanks for sharing Catfan Quote Link to post Share on other sites
catfan Posted September 30, 2013 Author Share Posted September 30, 2013 holmes and wayfarer 30 thank u so much for the help of getting my idea across better. i do know it will be easier to show off once i have the parts in front of me. but i love the 3d print idea because i can make any model part i want and it will have the right shape to it Quote Link to post Share on other sites
catfan Posted October 1, 2013 Author Share Posted October 1, 2013 so what air racers would people like to build i would love to hear feed back Quote Link to post Share on other sites
Netz Posted October 1, 2013 Share Posted October 1, 2013 Do you know CAD design? Have you gotten a quote for printing? Are you going to recast your prints? or do you think your going to sell the prints? Can they produce a usable print for your scale? You might find the idea cost prohibitive, it is quite expensive to get a high quality print, in our scale world the stepping associated with the printing process is quite noticeable and has to be corrected via allot of tedious hand work. A good quality print costs on average $300-$400.00 for a 3X3 inch plate. Keep researching and make some calls, there most likely are shops with the equipment closer to you than you think, pay them a visit, bring a sample of what you want to make and ask them if they are capable of doing it. Curt Quote Link to post Share on other sites
bashace Posted October 1, 2013 Share Posted October 1, 2013 I think producing kits/Mods to build 1/48 scale race planes is a great idea, definitely a neglected subject IMHO. But, not sure if the 3D printing is the way to go...yet. If one of the well known Resin part manufactures put some mod kits out there, I would be first in line to buy some. Then if another well known Decal company pushed out some nice decals for them...I would probably go broke. V/r Ron Quote Link to post Share on other sites
catfan Posted October 2, 2013 Author Share Posted October 2, 2013 well bashace Red Pegasus decals makes decals for a bunch of air racers. and with the 3D printed parts when i get them i will put up a bunch of pictures showing what they look like and all that when i get them. Quote Link to post Share on other sites
Adam Baker Posted October 2, 2013 Share Posted October 2, 2013 I've done some design work for C2D. Seems like a good company, and some friends have had parts printed by them w/ good results. Quote Link to post Share on other sites
Wayfarer 30 Posted October 2, 2013 Share Posted October 2, 2013 I've done some design work for C2D. Seems like a good company, and some friends have had parts printed by them w/ good results That is inspiring Catfan! Keep me posted on your progress. Mike Quote Link to post Share on other sites
fulcrum1 Posted October 2, 2013 Share Posted October 2, 2013 You can produce quality work, but until you start writing like a professional I won't be buying anything. Quote Link to post Share on other sites
HOLMES Posted October 3, 2013 Share Posted October 3, 2013 I've done some design work for C2D. Seems like a good company, and some friends have had parts printed by them w/ good results. That is inspiring Catfan! Keep me posted on your progress. Mike Mike .... It was Adam Baker who said HE HAD done some design work for CLICK2DETAIL.. Quote Link to post Share on other sites
niart17 Posted October 3, 2013 Share Posted October 3, 2013 You can produce quality work, but until you start writing like a professional I won't be buying anything. I would agree with this thought process...if he were here trying to sell term papers or technical manuals. But I fell to see how grammar in a modeling forum translates to quality of service for aftermarket parts. But that's just me, you are certainly free to opt out of course. I wonder how well Francios Verlinden spoke and wrote English when he started out? hmm... Bill Quote Link to post Share on other sites
habu2 Posted October 3, 2013 Share Posted October 3, 2013 But I fell to see how grammar in a modeling forum translates to quality of service for aftermarket parts. Accuracy and attention to detail come to mind, as do instructions and shipping labels... Quote Link to post Share on other sites
niart17 Posted October 3, 2013 Share Posted October 3, 2013 Accuracy and attention to detail come to mind, as do instructions and shipping labels... I get what you're saying, I really do. But how many people refuse to buy Trumpeter or Hobby Boss etc. because their English translations are usually shaky at best? My point is, IF he is doing quality parts you want at affordable prices (not saying he is, just for stating for example), it doesn't make sense to me to not buy them because his grammar isn't so great. That is assuming you'd buy them had his grammar been more proper. That's all I meant. I get it about professionalism and image and all that, but we are talking about a small cottage type business are we not? I don't expect my auto mechanic to be able to write a 1000 word dissertation about the internal combustion engine and I surely wouldn't go to an English professor to work on my fuel injectors. But again, it's everyone's right to take it or leave it for whatever reason they feel. I'm just stating an alternate side to it. Bill Quote Link to post Share on other sites
catfan Posted October 4, 2013 Author Share Posted October 4, 2013 niart17 u hit it right on the head. that is my idea is to offer quality parts that look awesome and are affordable and i hope to have the parts soon so i can post pictures. Quote Link to post Share on other sites
Maker Posted October 4, 2013 Share Posted October 4, 2013 What CAD program are you using? Is CAD hard to learn? How long did it take you to learn it? I have some parts I would like to make but have never tried CAD. Quote Link to post Share on other sites
catfan Posted October 4, 2013 Author Share Posted October 4, 2013 maker which parts do u have? Quote Link to post Share on other sites
Maker Posted October 4, 2013 Share Posted October 4, 2013 I don't have any parts that I need made at the moment. I've had plenty of projects in the past that I wished I could make parts for and I'm sure I'll have plenty more in the future. My questions are about CAD. What can you tell me about it? Can you answer my previous questions please? Are there any free or cheap CAD programs you would recommend? I'm also interested in the cost of having the click2detail make the parts. I haven't contacted them because I don't even know about CAD yet. Quote Link to post Share on other sites
habu2 Posted October 4, 2013 Share Posted October 4, 2013 Are there any free or cheap CAD programs you would recommend? I've played around with this one: http://www.freecadweb.org/ Quote Link to post Share on other sites
catfan Posted October 5, 2013 Author Share Posted October 5, 2013 maker if u contact click to detail they will do the work for u and make the parts Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.