Jump to content
ARC Discussion Forums
  • advertisement_alt
  • advertisement_alt
  • advertisement_alt
Sign in to follow this  
Vidar 710

USS Excelsior NX-2000

Recommended Posts

I'll be making my way back to this project very soon. To ease back into it, I'll be correcting the nacelles first.

They need to be lengthened 2" and the bows need to be reshaped. This will be done with a new buck that will accommodate the extra length and the new shape, then vacuum formed in clear so that the lights can be added in the lower nose of the nacelles. The shrouds at the top front of the nacelles will need to be reshaped as well to match the bottom profile.

Tracy

Share this post


Link to post
Share on other sites

Started refining the basic shape of the bridge dome and wall assembly. These two masters will be molded, then cast in clear Smooth-On Resin so they can be back-lit.

 

The aft section of the wall has a taper from its base to the top. I added a thin strip of styrene at the bottom of the wall, then applied Apoxie Sculpt to shape it, then sanded it to shape. I applied glazing filler to smooth out the assembly.

1016161926-1-1.jpg

 

Here the taper in the aft wall can now be seen.

1018160249_HDR-1.jpg

 

This expanded image to the NX Excelsior studio model's bridge shows the angle details in the leading edges of the wall. This has always been assumed to be a single angle, not three.

1018160230-1.jpg

 

Front profile.

1018160251-1.jpg

 

Top Forward Plan View

1018160252-1.jpg

 

Top Aft Plan View

1018160254-1.jpg

 

The Bridge Dome Master is hollowed out for lighting purposes.

1018160114-1.jpg

 

Inside surface is Smoothed out.

1018160124-1.jpg

 

The parts will be primed and polished so that the window/light port positions can be taped in. Several coats of primer will then be applied and buffed to build up a new surface. The tape will be removed to render all the light sources in both the dome and the wall - which has two light sources on each section of the wall.

 

Here is an image of the Studio miniature NX Dome with some light ports showing.

1012160026.jpg

 

And here is the bridge and wall light sources being shown on-screen.

tvhhd2265%201.jpg

 

Tracy

Share this post


Link to post
Share on other sites

Wow! Missed this the first round. I am impressed with the work you're doing. Very professional. I've never been a huge fan of the Excelsior class ships, but they are growing on me. And seeing this one come together makes me actually start to like the shapes much more. Keep up the great work!

 

Bill

Share this post


Link to post
Share on other sites

NEW Hi quality RARE photos of the NX version of the studio model have popped up. What was once thought to be a gap with a wall around the bridge dome has revieled that dark blue paint an low-res images has thrown off Trek modelers and Excelsior fans for decades.

 

Here, I've added strip styrene to the base of the side walls to taper the surface about 10deg. The Aft wall however is more pronounced at 20deg.

 

1030161043-1_2.jpg

 

Apoxie Sculpt has been applied to render the new surface.

 

1030161056-1_2.jpg

 

Here, Apoxie Sculpt has filled in the gap between the wall and the dome.

 

1030161120-1_2.jpg

 

Here is an image of the studio model on-screen. What we've thought to be a shadow of the wall being cast on the dome is actually Dark Blue painter hull surface.

 

1030160231.jpg

 

Tracy

Share this post


Link to post
Share on other sites

PhotoBucket must have been doing maintenance or something, but it's working great now.

New direct image from the top of the torp launcher section.


http://s676.photobucket.com/user/Tracy_Mann/media/0306172332-1.jpg.html?filters[user]=89213344&filters[recent]=1&sort=1&o=4

New 68mm circle cut 10mm to the left of center axis. (more than a half circle)

http://s676.photobucket.com/user/Tracy_Mann/media/0317170126a-1.jpg.html?filters[user]=89213344&filters[recent]=1&sort=1&o=3

Circle test fit over the image.

http://s676.photobucket.com/user/Tracy_Mann/media/0317170136-1.jpg.html?filters[user]=89213344&filters[recent]=1&sort=1&o=2

Confirming the scale of the image to my secondary hull master.

http://s676.photobucket.com/user/Tracy_Mann/media/0317170138-1.jpg.html?filters[user]=89213344&filters[recent]=1&sort=1&o=1

New plate placed on the master. You can see that the extended material making it more than half a circle, plus the tapered shape of the hull gives the illusion that the plate looks oval.

http://s676.photobucket.com/user/Tracy_Mann/media/0317170139-1.jpg.html?filters[user]=89213344&filters[recent]=1&sort=1&o=0

Tracy

 

 

Share this post


Link to post
Share on other sites

3D printed Aft Torp Launchers arrived. Here, a size, shape, and scale check over a scaled image of the studio model.

0410172325-1_1.jpg

 

Next, a couple of images with the part in place on the bottom of the secondary hull master. Real happy with how this came out!

0410172327-1-1_1.jpg

 

0410172327a-1_1.jpg

 

Tracy

Share this post


Link to post
Share on other sites

A few advances towards shaping the neck/dorsal structure, and the Warp Nacelles.

 

Template for the large plates. The smaller spacer template will be made directly from this template by removing 5mm of material from the outer edge.

 

0503172001-1.jpg

 

The neck sweeps forward at a 31 deg angle as seen in the drawing at the bottom of the page. The yellow sticky depicts the size of the two torp launcher recesses.

 

0503172003a.jpg

 

The Warp Nacelles need to be lengthened 1.5" to a total length of 22" to match the scale of the primary and secondary hulls, and the bow of the nacelles are terribly inaccurate in shape. Here a template was made directly off a scaled image of the studio model, and a Lunar Models nacelle bottom is placed over it showing the shape issue. Once the length and shape are corrected, a set of templates will be made to determine the shape of the grill plates in the nacelle.

 

0503172003-1.jpg

 

Tracy

Share this post


Link to post
Share on other sites

The plug to lengthen the nacelles to 22" is made from dense foam.

 

Here, the pattern is drawn in.

 

0508171536-1.jpg

 

It was cut out with a band saw, then roughly shaped before filling.

 

0508171800-1.jpg

 

Once refined, this plug will be molded, then two copies will be cast - one for each nacelle master.

 

Tracy

 

Share this post


Link to post
Share on other sites

Extension plug finished, molded and super glued into the nacelle.

 

0510172158-1.jpg

 

0510172218-1.jpg

 

0515171606.jpg

 

Same paper template was used to re-shape the leading edge of the Top Bow cowl.

 

0515172344.jpg

 

Parts glued onto the  plates.

 

0516170042-1.jpg

 

Paper templates made off the studio model images were made to update the shape of the trailing edge contour of the cowl.

 

0517170006-1.jpg

 

Trailing edge thin styrene patterns cemented into place.

 

0517170011-1.jpg

 

Now the Apoxie Sculpt was applied into the extension plugs, and sculpted into place to flesh out a rough contour for the corrected shape of the nacelle's bow.

 

0517170214-1.jpg

 

Close-up of the bow sections.

 

0517170214a-1.jpg

 

I'll let the Apoxie Sculpt cure for more than a day. I injected resin into the flimsy vacuum formed upper cowl kit parts to reinforce it for vigorous sanding so they won't cave in from the pressure. The Apoxie will be worked with various sanding techniques to refine the required shape, then a multitude of filling, sanding, and priming sessions will take place to get the nacelles to the desires shape.

 

Tracy

 

 

 

 

 

Share this post


Link to post
Share on other sites

Wow. Lots of effort going into this one.

Share this post


Link to post
Share on other sites

First round for refining the shape of the Nacelles bows. The Apoxie Sculpt has been sanded to shape.

0519170215-1.jpg

Next, filler will be applied to cover seems and imperfections in the nacelles.

Tracy

Share this post


Link to post
Share on other sites

Nacelles with their first primer coat, and the first round of filler to smooth out any imperfections.

 

0520170108-1.jpg

 

Tracy

Share this post


Link to post
Share on other sites

Back and forth with priming and sanding to level the surface.

 

0520171702-1.jpg

 

Nacelle bottoms and forward top cowls are complete! Shown here with the primary hulls superstructure.

 

0520172318.jpg

 

Tracy

Share this post


Link to post
Share on other sites

Here's how the progress of fixing the bottom of the primary hull went...

Original Lunar Models vacuum form part.

20131007_220159-1-1.jpg

Roughed out changes to be made

20131016_011231-1.jpg

Fleshing out the trench parts.

20131016_132114-1.jpg

Trench Assembly

20131016_133855-1.jpg

20131017_023203.jpg

New profile and trench ready for installation.

20131022_144908-1.jpg

Making the cuts.

20131022_150409.jpg

20131022_144752-1.jpg

Installing the changes.

20131022_155047-1.jpg

from the inside of the hull. styrene re-enforcements were made.

20131022_212342-1.jpg

Trench fully installed

20131022_212320-1.jpg

Determining the shaped of the Dorsal's Trench using a scaled image of the studio model. This also determined the correct shape of the secondary hull's bow.

20131025_005423-1-1.jpg

The crest is removed and a flat plate is installed for mounting the scratch-built Planetary Sensor Dome.

20131128_101614.jpg

Filling is the over-exaggerated grid details. I used Apoxie Paste to ensure the thin styrene would not be melted or deformed from standard fillers and puttys.

0504171406-1_1.jpg

A pater template is made and test fit to the hull.

0606170016.jpg

The cut for the Dorsal Trench is made.

0611170149-1.jpg

Base Plate is glued into place.

0612171457-1.jpg

The vertical wall is glued into plase. as well as a piece of sheet styrene to level out the dip in the hull.

0612171456-1.jpg

Plenty of back-n-forth with filling, sanding a priming until a smooth surface is made. Here it sits with the resurfaced upper half of the primary hull.

0625171457-1.jpg

With the bottom of the secondary hull's master complete, preliminary work has started on the Dorsal/Neck assembly. Templates shown in place.

0625171453-1.jpg

Tracy

Share this post


Link to post
Share on other sites

No way its will be done by Saturday, but keep going it looks great!

Share this post


Link to post
Share on other sites

Dorsal assembly in-progress images.

The entire assembly is scratch-built. However, the inserts in the front of the dorsal will be 3D printed.

Cutting the styrene by hand.

0629172318a-1.jpg

0703170016.jpg

41 plates were cut. More than half that didn't quite make the grade were relegated to being trimmed down to be the spacer plates.

0707172022-1.jpg

The Large plates and Spacer plates were clamped together for sanding to unify their shape.

0707172058.jpg

The Upper Adapter that attaches the dorsal to the primary hull is framed in styrene...

0714170352-1.jpg

0714171012-1.jpg

... then shaped with Apoxie Sculpt.

0714171024a.jpg

0714171040.jpg

Here, the ruffed out parts are stacked unglued at this point to check for alignment.

0715170108a-1.jpg

0715170108b-1.jpg

0715170110-1.jpg

0715170109b-1.jpg

Clean-up of the individual plates and the cutting of the two forward ports is the next step.

Thanx for lookin'!

Tracy

Share this post


Link to post
Share on other sites

This thing is a gonna be beautiful.  Scratch build from the ground up!

Share this post


Link to post
Share on other sites

Work on the dorsal section continues...

 

I assembled in 3 sections. The reasone is to keep the Torp recess section separate until I determine how big to cut the opening for the 3D rendered Torp Launchers.

The lower section, the Torp Trench section, and the upper/Adapter section.

0809171328-1.jpg

 

Here they sit stacked.

0809171327-1.jpg

 

Further work on the adapter is being done. The addition of styrene to fill where the saucer trench passes over the dorsal assembly. I roughed out the shape of the trench 'blocks', then applied a thin layer of Apoxie Sculpt and allowed it to set up. I then pressed the Adapter into the bottom of the primary hull to cast the profile of the trench. Once fully cured the excess was sanded away and polished to check for flaws.

 

Top View

0809171330-1.jpg

 

Bottom view.

0809171331-1.jpg

 

Side View

0809171331a-1.jpg

 

The top section of the Dorsal Assembly test fit into the bottom saucer's master.

0809171336-1.jpg

 

0809171340-1.jpg

 

Once Bob "Aptiviaboy" Morgan has finished modeling the Dorsal Canon parts, I'll order them printed from Shapeways. Once I receive them, I can then determine how wide to cut the ports into the mid-section of the Dorsal Assembly.

 

Tracy

Edited by Vidar_710

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...