Jump to content

1/48 Monogram F-5G?


Recommended Posts

Here's my latest. Its a 1/48 Monogram F-20 that I just finished. It was originally developed as the F-5G but was later changed to the F-20 hence the title of the thread.

I've been working on this kit off and on now for about 15 months. I started it for a group build in the Finescale Modeler forums but I wasn't even close to making the deadline.

Originally it had the USAF aggressor "lizard" scheme on it but I ruined the finish when I applied the flat coat. Apparently, Mr. Super Clear Flat and Future don't get along. After I ruined it I decided to go with a different aggressor scheme, stripped it and started over.

This kit is built mostly OOB except for:

-The HUD is scratch built

-I lost the nose gear door and scratch built a replacement

-The anti collision lights on the tail are scratch built

-The inert AIM-9 is from the spares box

-The AN/APX-95 is from the Hasegawa weapons set

-The decals are TwoBobs decals

-The gun barrels are scratch built from brass tubing

-The wingtip missile rails are from a Tamiya F-16 kit

-I added a Hydraulic line to the nose gear

Just kidding, BTW. I love it when people say "Its mostly OOB except I added ABC and XYZ." Its either OOB or its not folks. Last time I checked the contest rules there was no "mostly OOB" category. Ok...just had to get that of my chest.

Anyway, here it is. Hope you like it!

file-53.jpg

file-58.jpg

file-63.jpg

file-56.jpg

Edited by Fly-n-hi
Link to post
Share on other sites

That is HOT!!! Certainly one of the best air builds of the last 12 months for my money; everything is really sharp. The scheme and markings are resplendent. Many thanks for showing this beauty!

Also, with you on the 'OOB -except...' thing, it is pretty :doh: !

Link to post
Share on other sites

AWW HELLZ YEAH!

That is one really nice jet!

Ha! Thanks alot! I like that animation in your sig.

That is HOT!!! Certainly one of the best air builds of the last 12 months for my money; everything is really sharp. The scheme and markings are resplendent. Many thanks for showing this beauty!

That was a nice thing to say. Thank you very much.

Very nice build and the markings look very natural.

Thanks. I tried something new with this build. I brushed on Liquitex Acrylic Gloss Varnish. I gave the model a glass like finish and the TwoBobs decals really sat down well over it. Then I brushed/sprayed on the Liquitex Flat Varnish to seal them in.

Sweet build!, love the scheme!

Thank you! Edited by Fly-n-hi
Link to post
Share on other sites

ooh kill em

that's a great model. What was your painting process?

Thanks Ace!

The first time I painted it I primed the model with Tamiya grey primer, painted the Lizard camo with Tamiya Acrylics, sprayed on Future, decaled it and sprayed on Mr. Super Clear flat.

The second time, after I stripped it with 91% alcohol and windex I:

-Primed it again with Tamiya grey primer

-Pre-shaded with black

-Painted the nose black and masked it

-Applied the dark ghost grey thinly. The light grey is actually very weathered.

-Masked all the tiger stripes. This took about 15 hrs!

-Painted the dark grey tiger stripes

-Touched up the mistakes (there were plenty)

-Painted the gear wells white and vents black

-Brushed on the Liquitex gloss varnish. I brushed on about 5 or 6 very thin coats

-Painted the exhaust shroud area

-Decaled it using Micro Set

-Washed some of the panel lines with dark oil paint This kit had mostly raised panel lines.

-Brushed on the Liquitex flat varnish

-The flat Liquitex varnish was leaving brush strokes so a sprayed it on instead (I don't think I thinned it enough)

-Post shaded some of the worn out areas

-Made some hydraulic stains with brownish oil paint (this works well over a flat finish)

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...