Jump to content
ARC Discussion Forums

Sign in to follow this  
Darius at home

1:48 Scale Bailey Bridge Diorama

Recommended Posts

This project started with the discovery and purchase of a couple of 1:48 scale Bailey Bridge kits on eBay. As a civil engineer and modeller I could not pass this up. The kits arrived and I built one span (a triple single for those in the know). A tricky kit to put together but worth the effort as it looks the part once completed.

P1080639_zps06c3b161.jpg

P1080640_zpsee74f6df.jpg

P1080641_zps96729e4b.jpg

P1080644_zpscc05b8ad.jpg

What to do with this bridge. It would look pretty silly on its own on a shelf - its a bridge and so needs to span something - a river or other obstacle.

So I had this idea of building a diorama. I have been building 1:8 scale armour for a few years and had a few Desert campaign vehicles completed so I decided to set in the Western Desert of North Africa circa 1942-43. The bridge would cross a dry river bed (wadi), which would have the added advantage of not having to model water (no flash floods for me).

So I got to work with some bits of timber and hardboard that I had knocking around and built a base. I also built a central pier with the bits left over from the kit and a second kit. This will be a two span bridge - a third kit is now needed to complete the second span. Back on eBay...

P1080645_zps432a6cf5.jpg

P1080647_zps6e3ae854.jpg

P1080646_zps82727536.jpg

:cheers:/>

Darius

Share this post


Link to post
Share on other sites

Once the base and sides were complete, I built up the landscape using bits of styrofoam packing from old electrical good boxes stored in the loft. The styrofoam was cut roughly to shape with a kitchen knife and glued into place with PVA. This is a model railway scenery technique and works very well. Once the glue had dries further carving and shaping was done as required.

P1080648_zps85a10161.jpg

P1080649_zpsb10b902f.jpg

P1080650_zps509f9cdc.jpg

The completed styrofoam landscape was then coated with plaster of Paris (dental plaster) kinda sculpted to shape.

P1080652_zps9854a6b8.jpg

P1080653_zps6a5ce6d1.jpg

P1080654_zps69d93b21.jpg

P1080655_zpsa4afa59b.jpg

Share this post


Link to post
Share on other sites

The whole thing was then given a few coats of grey auto spray primer. The room was well ventilated for this operation!!!

P1080660_zps1c003c38.jpg

P1080661_zps0c42e514.jpg

P1080659_zps08b47f27.jpg

This gave the whole think a sort of lunar appearance so I took a few more shots...

P1080663_zpsf8dea316.jpg

P1080664_zps3f075ec3.jpg

P1080665_zpsbbe9d5c4.jpg

Share this post


Link to post
Share on other sites

The sides were then cleaned up and sprayed satin black and the landscape given a base coat of desert sand colour. This is not the final treatment as I intend to add various tones of flocks, desert scrub/shrubbery and the road/tracks as well as scattered rocks etc., which will be a learning process for me as I have never built something like this before.

P1080666_zps85fd9a1b.jpg

P1080667_zps2224d15d.jpg

P1080668_zpsaad4aabc.jpg

One one side of the diorama there is to be a 40mm Bofors gun emplacement with a sandbag wall surround. There are few 1:478 scale sandbag walls around and those that do exist are too small and very expensive - I think real sandbags are cheaper. The internet came to the rescue and on an armour forum the use of modelling clay was recommended. The technique is very simple and a lot of fun. All that time playing with plasticene 40+ years ago was not wasted!!!

P1080669_zpsdcbac76f.jpg

P1080670_zpsc5f6efc5.jpg

P1080671_zps2eba5a6b.jpg

Share this post


Link to post
Share on other sites

The model sandbags are glued into place with PVA and also coated with dilute PVA once in place. The wall is built up from individual sandbags just as the real thing is.

P1080672_zps2bcb7d60.jpg

P1080673_zps833e67b7.jpg

P1080674_zps06ab83d0.jpg

P1080675_zps962b4dda.jpg

P1080676_zps36fcf1c0.jpg

P1080677_zpsc50eec47.jpg

P1080678_zps7ee3d532.jpg

:cheers:

Darius

Share this post


Link to post
Share on other sites

Really a special idea to make a model bridge to the main part! The bridge really looks good, why always doing vehicles and planes??

Haa...why not putting a prop fighter in the scenery just underflying the bridge? :rolleyes:

Share this post


Link to post
Share on other sites

Great diorama idea and great start to it as well 70.gif !

I'm very interested in how you will convey the theme that the bridge is the diorama rather than only being part of a diorama.

Share this post


Link to post
Share on other sites

Started adding the "desertscape" to one end today using various hues and sizes of gravel, plus some scraps of hemp as the small scrubby bushes that are common to the Western Desert.

Also painted the sandbags.

P1080679_zps476b793d.jpg

P1080680_zpsce596144.jpg

P1080681_zps47d04d8a.jpg

P1080682_zps2f912c4c.jpg

P1080683_zpsb9df2106.jpg

:cheers:/>

Darius

Share this post


Link to post
Share on other sites

Darius,

Wow - nice landscaping! The bridge is going to look great in that setting - as said above it'll be hard to tell what the center piece is - especially if you put some armour crossing the bridge.

Respect man, :cheers:/>

David

Share this post


Link to post
Share on other sites

Some more progress with the landscaping and some engineering - there is still something missing but I can't put my finger on it...

P1080686_zps74bde9dc.jpg

P1080685_zpsadd5742a.jpg

P1080687_zps89f49d9a.jpg

P1080688_zps08acf3b3.jpg

P1080689_zps5cd3d993.jpg

:cheers:

Darius

Share this post


Link to post
Share on other sites

Looking good, Darius 70.gif !

Question: Will the bridge be the focal point?

I'm guessing that whatever you feel is missing maybe something that would/should draw attention to the bridge.

The pics you posted of the tanks on the bridge; the tanks looks like the focal point.

Just a thought; something to chew on.

Share this post


Link to post
Share on other sites

Looking good, Darius 70.gif !

Question: Will the bridge be the focal point?

I'm guessing that whatever you feel is missing maybe something that would/should draw attention to the bridge.

The pics you posted of the tanks on the bridge; the tanks looks like the focal point.

Just a thought; something to chew on.

I have been reading Shep Paine's excellent "Dioramas" book so I think I have an idea of what you are getting at.

The bridge is the large thing in the centre of the diorama so I guess that is the centrepiece. I am still playing around with the composition with respect to vehicles and figures etc. so there is no one focal point as yet. In a relatively close up shot of a tank, the tank will inevitably look like the focal point. I could leave the diorama free of vehicles and figures, which would leave only the bridge to "focus" upon but, to me, that would be a bit boring.

I have seen photos of model railway layouts with impressive large span bridges and the photos inevitably have a train crossing the bridge. As a civil engineer I tend to focus on the model of the bridge first and the train second. For others the focal point might be the train and the bridge is what draws their attention to it. I suppose the focal point is in the eye of the beholder.

:cheers:

Darius

Edited by Darius at home

Share this post


Link to post
Share on other sites

I have been reading Shep Paine's excellent "Dioramas" book so I think I have an idea of what you are getting at.

The bridge is the large thing in the centre of the diorama so I guess that is the centrepiece. I am still playing around with the composition with respect to vehicles and figures etc. so there is no one focal point as yet. In a relatively close up shot of a tank, the tank will inevitably look like the focal point. I could leave the diorama free of vehicles and figures, which would leave only the bridge to "focus" upon but, to me, that would be a bit boring.

I have seen photos of model railway layouts with impressive large span bridges and the photos inevitably have a train crossing the bridge. As a civil engineer I tend to focus on the model of the bridge first and the train second. For others the focal point might be the train and the bridge is what draws their attention to it. I suppose the focal point is in the eye of the beholder.

271.gif

Darius

Ah; That's exactly where I learned about dioramas!

What I was thinking about was something along the lines of having soldiers either working on the bridge or inspecting the bridge while the tanks and vehicles sit at the entrance to the bridge.

Depending on how comfortable you are with positioning and painting figures; Any figures in the diorama that's looking at or toward the bridge will greatly enhance the storytelling.

A Lee tank crew looking at the bridge with one pointing at it is a good example. Some engineer soldiers repelled over the side of the bridge looking at something is another. Maybe a couple of soldiers on the bridge straining looking over the side at the bridge structure. You get the idea.

By doing that with the figures and having the tanks and vehicles on the side(s) of the diorama, The observer/audience will quickly pick up and understand the diorama story.

BTW; These are just some examples off the top of my head at how to draw the audience's attention. Having a bridge as a focal point can be tricky because it almost always plays just a supporting role in a diorama so it has to really be obvious or jump out at the audience.

Looking forward to the rest of the progress!

Share this post


Link to post
Share on other sites

Interesting ideas. I am new to figure painting but am keen to have a go and apply the "stop sign" principle as explained in the book. I would like to see the bridge in use so perhaps there could be an Army Film Unit detachment on one side filming the tanks crossing. Also many bridges were given names with signs saying "London Bridge" so there could be a squaddie completing the painting of the sign...

:cheers:/>

Darius

Edited by Darius at home

Share this post


Link to post
Share on other sites

Interesting ideas. I am new to figure painting but am keen to have a go and apply the "stop sign" principle as explained in the book. I would like to see the bridge in use so perhaps there could be an Army Film Unit detachment on one side filming the tanks crossing. Also many bridges were given names with signs saying "London Bridge" so there could be a squaddie completing the painting of the sign...

271.gif/>

Darius

Whoa; That's an awesome idea!

Have a big reel-to-reel on a tripod or something similar.

That's a good point about bridges being named. It'll be interesting what you come up with.

Share this post


Link to post
Share on other sites

Hello,

Very nice work, that bridge of yours made me sweat i was in the Military Engineers in the military have done some in 1/1 scale!

Cheers

Boris

Share this post


Link to post
Share on other sites

Part of an Army Film & Photographic Unit (AFPU) crew has been prepared over the past few days. I scratch built the camera/tripod installation and modified 28mm 8th Army figures for the AFPU personnel. The Chevrolet CMP is an ASAM Models white metal kit.

P1080787_zps91c6d582.jpg

P1080788_zpscb0ec28b.jpg

P1080789_zps3a0c4df6.jpg

P1080790_zps3961ef51.jpg

P1080791_zps964e267e.jpg

P1080792_zps6205cf40.jpg

To follow will be the painting of the bridge name sign bay a third AFPU member using a still camera. Plus the Bofors crew leaning on the sandbags looking at the bridge.

:cheers:/>

Darius

Share this post


Link to post
Share on other sites

Adding a representative of the local populous was an awesome idea 70.gif !

The diorama really looks great.

How much does it weigh?

Share this post


Link to post
Share on other sites

Just an observation, but from an engineering perspective, I wouldn't think that bridge would support 2 tanks on any one span at a time. I'd say you're one tank heavy.

Look online at tanks crossing bridges, and you'll see that the spacing is usually quite wide. Like this:

pzIVcrossingDon_zps9f2ad4d8.jpg

131712371.jpg

This gives a good indication why:

6_15_2008104043PM_6288805262.jpg

Share this post


Link to post
Share on other sites

Just an observation, but from an engineering perspective, I wouldn't think that bridge would support 2 tanks on any one span at a time. I'd say you're one tank heavy.

Hi Kozlok,

The load carrying capacity of a Bailey Bridge (or any other bridge) will depend upon its span and its type of construction. With respect to the military use of a bridge, each military vehicle will have a Military Load Class (MLC), which is a function of its weight, width, speed of crossing etc.

Bailey Bridges, being constructed from a kit of parts, can be built in different configurations depending on the span to be crossed and the weight to be carried. The spans can be one, two or three trusses wide on each side of the road deck and up to three truss "storeys" high - ranging from a single single (one truss on each side of the deck) to a triple triple (three trusses wide and high on each side of the deck). Sir Donald Coleman Bailey was a very clever chap.

Each Bailey Bridge span on my diorama spans 327mm between bearing centre lines. This scales up to a full scale span of 15.696 metres or 51.5 feet.

The M3 Lee/Grant tank has a weight of 30 short tons (27 tonnes), which gives it an MLC of 40.

I wanted my bridge to have a decent load carrying capacity so I built it as a triple single - three trusses on each side of the deck by one "storey" high. The triple single has an MLC of 40 (36.3t) for a span of 110 feet and an MLC of 70 (63.6t) for a span of 70 feet. The worst case bending moment is with the load at mid-span and calculations indicate a bending moment capacity of around 3000kNm (26,550 kip.in) for a triple single in each of those conditions.

My span is 51.5 feet. To give the same bending moment the maximum mid span load would be 78 tonnes - thus the spans in my diorama could carry two M3 tanks at mid-span and still be within the maximum bending moment.

Of course there are other issues, such as shear forces, SF and BM influence lines, and individual buckling of members, but these are accounted for in the MLC.

I am therefore confident in the load carrying capacity of my model Bailey Bridge.

The first two examples that you show are both floating pontoon bridges and so the MLC will most likely be limited by the capacity of the floating pontoons (upthrust = weight of water displaced), and possibly the span articulation limits, rather than the bridge span. They are also not Bailey Bridges so I cannot comment on their specific load capacities.

Your third example is a Bailey Bridge (Triple Single) and is a cautionary tale of what happens when you don't observe the MLC.

Great to be able to talk Civil, or rather Military, Engineering on ARC!!!

:cheers:/>

Darius

PS - I am a Civil Engineer by profession, as you may have gathered from the above...

Edited by Darius at home

Share this post


Link to post
Share on other sites

Adding a representative of the local populous was an awesome idea 70.gif !

The diorama really looks great.

How much does it weigh?

The all up mass of the diorama, including the tanks and the camel, is just under 8kg.

:cheers:

Darius

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...