infofrog Posted February 20, 2016 Author Share Posted February 20, 2016 I can suggest to apply Mr. Mark Softer or similar products over the silvering decals. I made this once and was able to save the decals. You may have to punch tiny holes into the decal to ensure the Softer liquid goes under the complete decal. But this stuff smoothly dissolve the decal, but not completely, and when the decal straightens again, it will hopefully lay smooth to the surface. HAJO I tried this with Walthers Solvaset, Looks so much better . The decals lighting up a lot that's ok . If not ,I do what Heavy and scotthldr suggested I will post photos later . It going be almost 70 today . Be garage working and cleaning Rick Quote Link to post Share on other sites
infofrog Posted February 20, 2016 Author Share Posted February 20, 2016 I tried to fix the silvering . Looks better not perfect but better Enjoy Rick Quote Link to post Share on other sites
infofrog Posted February 21, 2016 Author Share Posted February 21, 2016 Working on the blade support. The kit only has 2 support braces . I need to make Several braces now . Enjoy Rick Quote Link to post Share on other sites
midnightprowler Posted February 21, 2016 Share Posted February 21, 2016 Coming along nicely. Decals look better. Quote Link to post Share on other sites
infofrog Posted March 6, 2016 Author Share Posted March 6, 2016 I finished the rotor blade support system Enjoy Rick Quote Link to post Share on other sites
hawkwrench Posted March 7, 2016 Share Posted March 7, 2016 Looking mighty fine, Rick! Tim Quote Link to post Share on other sites
Floyd S. Werner, Jr. Posted March 7, 2016 Share Posted March 7, 2016 A way to deal with silvering is to use a brand new blade and cut the decal lightly. Then reapply the Solvaset and repeat as necessary. Works everytime with me. By the way the helicopter is coming along great. Quote Link to post Share on other sites
infofrog Posted March 7, 2016 Author Share Posted March 7, 2016 Thank you Rick Quote Link to post Share on other sites
midnightprowler Posted March 7, 2016 Share Posted March 7, 2016 Looking good sir. Quote Link to post Share on other sites
infofrog Posted March 14, 2016 Author Share Posted March 14, 2016 Thank you I been working on the rear folded area . Not sure what thats call or proper name . I installed the fold tail . I added some hydraulic lines .. Enjoy Rick Quote Link to post Share on other sites
Rotorman Posted March 16, 2016 Share Posted March 16, 2016 looks good from here Quote Link to post Share on other sites
Lyash Igor Posted March 16, 2016 Share Posted March 16, 2016 Superb! Quote Link to post Share on other sites
infofrog Posted March 17, 2016 Author Share Posted March 17, 2016 Thank you all Rick Quote Link to post Share on other sites
salvador001 Posted March 17, 2016 Share Posted March 17, 2016 Looks fantastic, the paint job is top notch. Rod. Quote Link to post Share on other sites
Rotorman Posted March 20, 2016 Share Posted March 20, 2016 This is looking rather sharp. I like it. Quote Link to post Share on other sites
infofrog Posted March 21, 2016 Author Share Posted March 21, 2016 Things are Slow moving . Everyday day work , now spring coming . Outside work now .. Mowing grass , yard work and garden thanks for looking Rick Quote Link to post Share on other sites
Shawn M Posted March 21, 2016 Share Posted March 21, 2016 really nice, love the added color of the rotor supports Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.