K5054NZ Posted February 3, 2017 Share Posted February 3, 2017 I don't know if anyone's mentioned it, but the Zvezda kit is being reboxed by Revell in April. Quote Link to post Share on other sites
Ken Cartwright Posted February 3, 2017 Author Share Posted February 3, 2017 Wow, I hadn't heard, thanks! I have already ordered mine from Russia and it should be on its way, but it's good to know that there may be an easier source in the future. Quote Link to post Share on other sites
MoFo Posted February 3, 2017 Share Posted February 3, 2017 I'd imagine the Revell kit will be substantially more expensive, though. Quote Link to post Share on other sites
niart17 Posted February 8, 2017 Share Posted February 8, 2017 Just judging from the other Revell SW pricing, I'd bet it's going to be higher as well. I guess it has to do with the licensing agreement? Russia perhaps got a better deal because of economic differences and the fact they aren't distributing "officially" beyond their area. So Lucas/Disney maybe figures at least they can offer Zvezda some rights at a price they can afford, get the sales money from Russian customers and then work a deal through Revell to make bigger profits with a larger reach. Makes business sense I suppose but doesn't make it so nice for us builders. I'm happy with what I paid for mine through E-bay. Free enterprise works. Bill Quote Link to post Share on other sites
cvrle Posted February 9, 2017 Share Posted February 9, 2017 I think they're mentioning 99 euros for it here in Europe Quote Link to post Share on other sites
niart17 Posted February 9, 2017 Share Posted February 9, 2017 If that really be the case, that's actually not bad at all. About the same roughly dependent on shipping. Bill Quote Link to post Share on other sites
Ken Cartwright Posted February 17, 2017 Author Share Posted February 17, 2017 I received my Zvezda kit from the same ebay seller mentioned earlier - thanks for the info! Also, I ran across this, and will probably be ordering one: https://www.shapeways.com/product/BU2FD7RUZ/1-2700-rebel-blockade-runner-zvezda-star-destroyer Quote Link to post Share on other sites
The Madhatter Posted March 2, 2017 Share Posted March 2, 2017 On 01/02/2017 at 2:50 AM, niart17 said: Well, I finally got my Zvezda Star Destroyer in and man am I happy! This is a really nice and good sized kit. There are a few weak spots that I intend to fix via either creating some Shapeways parts and/or scratch building, but nothing that is too complicated. I'd started with the "domes" as you can see above and I'll revisit that whenever I get time. But the other major part I feel is lacking in the kit are the main engine bells. It's close but not quite right. So I've started with the design work. Pretty simple shapes actually. I do have one question though to get you guys opinions. The prop had large light fixtures fitted inside the bells. The kit maker decided to somewhat copy the ridged detail like on the secondary bells. I am not sure which would be the best way to go, try to replicate the light fixture or just go with how the kit was done? What say ye? Actual movie prop. Bill I would be keen for a set of these bells if you made some. I am still thinking of ways to improve the Zvezda offering as it just doesn't look right. I'm pretty sure it would be easy enough to make the internal ribs go all the way to the edgers but it's complexity is compounded by the odd flatish surfaces where the originals meet. Quote Link to post Share on other sites
The Madhatter Posted April 7, 2017 Share Posted April 7, 2017 I just bought your Engine Bell and Antenna set from Shapeways Bill - and that was only because I happened to come across your build thread on the RPF. Shame you don't do one here too (hint hint) Quote Link to post Share on other sites
niart17 Posted April 7, 2017 Share Posted April 7, 2017 Hey Madhatter. Thanks, Yes, I will have to post the build over here too. It's just become harder to get on this site at work during breaks so I don't frequent here as often. BTW, I just got notice from Shapeways that there is an issue with that upgrade set in the printing. I'm working with them now to resolve the problem and hope to have it ready again soon. Sorry if your order happened to get caught in that problem area. Thanks, Bill Quote Link to post Share on other sites
The Madhatter Posted April 8, 2017 Share Posted April 8, 2017 Yeah, I got an email this morning advising me that the order couldn't be printed for what ever reason. They claim I wasn't going to be charged for it but I have been. I suspect it will reject soon enough. I'm not to fussed as its easy enough to get back if the issue can't be rectified. Are you able to make a master mould of your one and cast it in resin? Mind you, I saw one on RPF that used the kit supplied bells and the last guy cast a really cool shadow towards the back of front rim. It looked very effective even though that wasn't the intention. I'm in 2 minds about what to do with the bells. Do I go for an AM part like yours or do I try do something myself? Hard choice and it depends on how lazy I'm feeling. I've got plenty of time to think about it :) Regards Simon Quote Link to post Share on other sites
niart17 Posted April 8, 2017 Share Posted April 8, 2017 The issue should be fixed now and it should be ready for ordering. I am really sorry for the inconvenience. I am pretty sure they have printed some already besides mine but for some reason all of a sudden it wasn't within limits? Not sure what that's all about. Thanks again for the support and the interest Bill Quote Link to post Share on other sites
The Madhatter Posted April 8, 2017 Share Posted April 8, 2017 that's all good - I am always happy to support others where I can :) Quote Link to post Share on other sites
The Madhatter Posted June 18, 2017 Share Posted June 18, 2017 hi all I had a package arrive today from Canada with some of the nicest, most non-3D printed looking parts for the Zvezda SD enclosed. I bought a detail set from a small outfit known here: http://www.falcon3dparts.com/sd_upgrade/ I have to say - this is some of the most beautiful 3D printing I have ever seen. It doesn't look like 3D printing stuff usually does - more like resin This is an incredible set and well worth the money. Take a peek at the pics I took of it (I am a firm believer of not believing promo shots) A couple of the small antenna appear to have broken off the shield generators but they will be an easy fix. All in all, I think this is a great set and well worth getting MH MH Quote Link to post Share on other sites
skyhawk174 Posted June 20, 2017 Share Posted June 20, 2017 Ok those parts look great. I will have to go take a look at the site. My friend bought the Star Destroyer directly from Russia but i think I will wait until Revell issues it and I can see it locally. Not in a big rush to get it as I am not hurting for kits to build. Thanks for posting. Quote Link to post Share on other sites
Finn Posted June 21, 2017 Share Posted June 21, 2017 Here are the instructions for the Revell Star Destroyer: http://manuals.hobbico.com/rmx/85-6459.pdf which according to the Revell site is due out this month. Jari Quote Link to post Share on other sites
duck Posted June 21, 2017 Share Posted June 21, 2017 Hopefully I'll be able to afford one some time this year. It will need different main battery turrets though. Makes more sense to have the main guns pointed forward then port and starboard. Quote Link to post Share on other sites
Charlie D. Posted July 6, 2017 Share Posted July 6, 2017 Got mine from tower hobbies for $102 shipped! Quote Link to post Share on other sites
skyhawk174 Posted July 7, 2017 Share Posted July 7, 2017 (edited) So I see on Starshipmodeler.com that they have listed the Revell/Zvezda Star Destroyer at $108 USD plus shipping. Sounds like a good price since they have reduced it from $135. I think I am going to wait until it lands at my local hobby shop. Even if it is more expensive I will be paying in CDN dollars and I won't have to ship it from the US. Edited July 7, 2017 by skyhawk174 Quote Link to post Share on other sites
Ken Cartwright Posted May 7, 2019 Author Share Posted May 7, 2019 Resurrecting this old topic because a new Star Destroyer kit is coming out - from Bandai! It's not as big as the Zvezda, or even the Revell kit, at 1/5000 scale and only a little over 12 inches, but coming from Bandai I expect that it will be well made. Here's a link to the Bandai site: https://bandai-hobby.net/sw/jp/products/stardestroyer_5000_1.html Quote Link to post Share on other sites
2qwik4u Posted May 7, 2019 Share Posted May 7, 2019 12 hours ago, Ken Cartwright said: Resurrecting this old topic because a new Star Destroyer kit is coming out - from Bandai! It's not as big as the Zvezda, or even the Revell kit, at 1/5000 scale and only a little over 12 inches, but coming from Bandai I expect that it will be well made. Here's a link to the Bandai site: https://bandai-hobby.net/sw/jp/products/stardestroyer_5000_1.html Yup, they're releasing two different versions, one with lights and one without. With lights is going to retail for $140, and without will be $80. A little on the pricey side considering the scale, but the detail should be spectacular. -David Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.