Silenoz Posted October 20, 2016 Share Posted October 20, 2016 (edited) this is my build of a what if hydrofoil torpedoboat called the Schertel-Sachsenberg sk.116. It was supposed to be on the drawing board in 1942, but "un"fortunately is has never seen the light of day. Hydrofoils started to be investigated in Itali by Enrico Forlanini in 1898, who made his first prototype in 1908: Baron Von Schertel was also intrigued by this and started working on this in 1927, and in 1936 several prototypes were build to prove the concept. In 1937 he joined with the Gebrueder Sachsenberg AG, who had a construction yard near Rosslau-on-Elbe. Together they founded the Schertel-Sachsenberg Hydrofoil syndicate. their first mutual design was a passengerboat which reached 40kn. This model was used throughout the war during the war they made several prototypes,which were destroyed prior to the acceptance test by bombing (allies learned that is was better to bomb when a project was almost finished, so that manpower and resources were occupied till the last moment... ats of war....) the box: the sprues the guide... and another reference drawing: Here you can see three windows, on the boxart also, in the box the clearparts have 4 windows... Edited October 24, 2016 by Silenoz Quote Link to post Share on other sites
Silenoz Posted October 20, 2016 Author Share Posted October 20, 2016 the hull is comming together, lots of sanding and dryfitting: In hindsight it would have been better to make the left side the right side and the hollow for the torpedo separately and try to merge them afterwards... next time... also the torpedo needed it's share of putty... hull is ready at the moment for new weldlines, the fins are glued, but need to be thinned a lot so that they are more wing-like, so more putty and sanding ahead... With regards to the camouflage, I don't know yet... box-art or splinter, ideas are welcome Quote Link to post Share on other sites
Silenoz Posted October 21, 2016 Author Share Posted October 21, 2016 Hull should be as good as finished, time to apply weld marks and a surface check a little more work is neede in this area torpedo is flush then actuator broke off... new profile in copper... a little cutting and bending torpedo is too long for screws and rudders, removed +/- 2mm looks better: "wings" are also filled and sanded... ready to mount Quote Link to post Share on other sites
JohnS Posted October 24, 2016 Share Posted October 24, 2016 Great work, so far. Nice recovery by scratch building the torpedo actuator. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.