ReccePhreak Posted November 27, 2017 Share Posted November 27, 2017 11 minutes ago, Hans said: Hey Larry, if it's not too much trouble, can you provide some visuals for this? I can't seem to picture it out myself, and I really like to try your tip out on mine, thanks much! Hi Hans, It's not my tip, but Joel's. Maybe he can help you. Larry Quote Link to post Share on other sites
Hans Posted November 27, 2017 Share Posted November 27, 2017 5 hours ago, ReccePhreak said: Hi Hans, It's not my tip, but Joel's. Maybe he can help you. Larry Oh yes, didn't noticed it right away, much thanks! Joel, requesting your help please in your tip regarding the KH OV-10 landing gear struts, much thanks Quote Link to post Share on other sites
Joel_W Posted November 27, 2017 Share Posted November 27, 2017 9 hours ago, Hans said: Oh yes, didn't noticed it right away, much thanks! Joel, requesting your help please in your tip regarding the KH OV-10 landing gear struts, much thanks Hans, When you install the landing gear, you need to apply a little pressure while the glue dries so that the gear has a slight positive camber, that's where the top of the wheel is angled towards the fuselage. when the model rests on the gear, the weight will spread the gear slightly so that the gear/wheel is now close to zero camber, thus being as vertical as you can get it. this will prevent the gear from eventually squatting out. Metal gear struts epoxied in would certainly be a major plus, but like I said Ernie G is just about retired at this point, so I wouldn't hold your breath waiting for him to make them. I know because on LSP they've been asking him to do them, and Ernie still hasn't said yes. Joel Quote Link to post Share on other sites
HomeBe Posted March 3, 2018 Share Posted March 3, 2018 On 30/08/2017 at 6:04 AM, Zactoman said: Our next project will be announced soon enough. I can't say what it is yet, but I will say it's not a twin engine blue aircraft. Focus and repeat after me: "Bronco, Bronco, Bronco" Bronco, Bronco, Bronco... V.P. Quote Link to post Share on other sites
Starship Trooper Posted March 6, 2018 Share Posted March 6, 2018 Sir Zactoman, any updates on the progress and release? Quote Link to post Share on other sites
Zactoman Posted March 18, 2018 Author Share Posted March 18, 2018 On 3/6/2018 at 12:36 PM, Starship Trooper said: Sir Zactoman, any updates on the progress and release? Still no update on release date or price. Tooling is still being worked on. Decals artwork is finished and decals will be printed soon. Instruction sheets are in-progress. Package design is in-progress. Here are profiles of the included schemes that I did for the packaging. They will also be included along with the decal placement charts in the box. Quote Link to post Share on other sites
spang Posted March 18, 2018 Share Posted March 18, 2018 great Quote Link to post Share on other sites
Silverfox Posted March 18, 2018 Share Posted March 18, 2018 What's happened to the Facebook page? I can't seem to find it anymore. I was glad to see the replies are still coming on here - was worried that there'd been some kind of problem and it'd all fallen through. Quote Link to post Share on other sites
Joel_W Posted March 18, 2018 Share Posted March 18, 2018 Really looking forward to getting not one but two kits for sure. Joel Quote Link to post Share on other sites
Winnie Posted March 21, 2018 Share Posted March 21, 2018 I can't wait. I will definitively get a couple 3 of these. I have gathered all the materials for my 32nd one, and hope to start that one soon too.. Cheers! Quote Link to post Share on other sites
skyhawk174 Posted March 21, 2018 Share Posted March 21, 2018 A couple of nice schemes there Zactoman. Thanks. I already have my Testors kit put aside to donate to a needy family. I had the Paragon update set too but I think I got rid of that years ago. Quote Link to post Share on other sites
Sabre Freak Posted May 13, 2018 Share Posted May 13, 2018 (edited) Tried to go to the FB page. Oh. Bummer. Edited May 13, 2018 by Sabre Freak Quote Link to post Share on other sites
Floyd S. Werner, Jr. Posted May 13, 2018 Share Posted May 13, 2018 I was wrong. AIRES set 4678 offers FOUR M-60s in 1/48 scale. Here is my review: https://web.ipmsusa3.org/content/m-60-762mm-machine-gun I knew I'd reviewed it. Floyd Quote Link to post Share on other sites
Zactoman Posted May 16, 2018 Author Share Posted May 16, 2018 On 5/12/2018 at 11:58 PM, Sabre Freak said: Tried to go to the FB page. Oh. Bummer. Facebook page should be fixed now. I added the following new message: I have decided to end my relationship with HazMAT Models. Sorry, but I do not know the status of the Bronco kit. I have no answers so will not be replying to questions about the company or the kit. I will post a link to their new Facebook page and/or website if and when they are created. Quote Link to post Share on other sites
HomeBe Posted May 27, 2018 Share Posted May 27, 2018 (edited) Read in the HazMAT facebook replies (link) a comment from Martin "AMK" Wilson: If the moulds exist, there's hope. As if the (in)famous Terry want to earn some money, he has now to edit the kit. Wait and see. V.P. Edited May 27, 2018 by HomeBe Quote Link to post Share on other sites
Joel_W Posted May 27, 2018 Share Posted May 27, 2018 I wonder why the molds were returned in the 1st place? Surely the full cost of injection molding had been discussed and agreed on by that point. Joel Quote Link to post Share on other sites
cag_200 Posted June 19, 2019 Share Posted June 19, 2019 last post may 2018? Quote Link to post Share on other sites
ReccePhreak Posted June 19, 2019 Share Posted June 19, 2019 Beginning to look like "Pie in the sky". Quote Link to post Share on other sites
ScottAZ Posted December 24, 2019 Share Posted December 24, 2019 Any progress with the Hazmat OV-10A? Quote Link to post Share on other sites
picknpluck Posted December 29, 2019 Share Posted December 29, 2019 On 12/24/2019 at 2:07 PM, ScottAZ said: Any progress with the Hazmat OV-10A? It ain't happening. I don't remember the details but this project went off the rails awhile back. Quote Link to post Share on other sites
B.Sin Posted December 30, 2019 Share Posted December 30, 2019 16 hours ago, picknpluck said: It ain't happening. I don't remember the details but this project went off the rails awhile back. Very sad! Quote Link to post Share on other sites
ziggyfoos Posted December 30, 2019 Share Posted December 30, 2019 Yes very sad. Also got to the point where decals were also finalized for print. The 3d printed version "kit" I got looked fantastic which makes it more of a shame as it was much better looking in details and parts compared to even the larger 1/32 current kit. Quote Link to post Share on other sites
Whiskey Posted December 31, 2019 Share Posted December 31, 2019 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.