Silenoz Posted January 19, 2017 Share Posted January 19, 2017 (edited) I've started construction on this flaklighter while waiting till I've got time to continue on my Tupolev. The kit is from White Ensign Models and is in 1/350. For Operation Seelöwe our German friends had made some barges to transport their heavy equipment across the Channel. Eventually the operation was cancelled, but the barges were allready made.(source: http://historisches-marinearchiv.de/)These were then used to evacuate Crete, but also in Norway, Italy, the black sea, Baltic sea ...They were rather large with 49m length, 6.6m width, but had a shallow draft of 4 feet, which was their greatest advantage. Most allied torpedo's were functioning ok from a draft of 8feet, so the torpedo's malfunctioned or passed under the hull. With 10 knots they were rather slow and easy prey from the air. So Germans wouldn't be Germans if they hadn't a gründliche solution for this, thus they made the Flaklighter, a heavily armed barge, that could withold itself with most foes at sea. It was armed with 2x 88mm or 105mm guns, 2x a 20mm flakvierling, 2x 20mm single guns and 1x a 37mm gun. These could all engage targets down to earth or in the sky (with exception of the 88mm/105mm guns) Frankly, the allies didn't love this, and at first it was a complete surprice. PT-boats were instructed to avoid a confrontation with these. On to the kit: Not that much in the box: 1 solid resin hull 2x a 88 or 105mm gun emplacement, which I don't know yet if I will use them like this: a bit PE:and a manual with different colour schemes: I've started slowly by adding some splinter shields at the aft. The shields that are casted in the kit are also provided in PE, don know yet if I will use these. I've soldered these first to ease the outlining on the hull (3 separate pieces to align and position at once...and the first single 20mm gunmount has been assembled: I thickened the PE with solder to give it some more body, PE is rather flat Edited January 20, 2017 by Silenoz Quote Link to post Share on other sites
Hajo L. Posted January 19, 2017 Share Posted January 19, 2017 Ich liebe deinen Baubericht! Very gründlich! ;) HAJO Quote Link to post Share on other sites
Silenoz Posted March 15, 2018 Author Share Posted March 15, 2018 Finally some small progress: had some time to work on the main guns. Been looking for references, but that seemed a bit difficult. So I made some educational guesses: original: then I ordered some resin Italian 100 or 105mm guns: drew a new casemate on paper: and cut them out, hardened the paper with CA, weakened the fold-lines and made the casemates: The one on the left was a first try, but I forgot about the taper on the sideplates. When assembled in dryfit it looks like this: and two parts ready for paint, hope it will work out a bit: Quote Link to post Share on other sites
Tecko Posted March 16, 2018 Share Posted March 16, 2018 @Silenoz, that is such a small scale! I would easily stuff it up in a heartbeat through my fingers. Doing a grand job. I am interested to see how this project turns out. Quote Link to post Share on other sites
Brett M Posted September 9, 2018 Share Posted September 9, 2018 Did you ever finish this John? Quote Link to post Share on other sites
Silenoz Posted September 10, 2018 Author Share Posted September 10, 2018 Not yet, had a problem assembling the flakvierlings, so I've ordered a few from Veteran models, together with a rangefinder and other 20mm guns. Then life happened (read other projects while waiting) and some resulting damage (cats, lovely beasts) to this one that still is in need of repair and a restart of this project... Quote Link to post Share on other sites
niart17 Posted September 10, 2018 Share Posted September 10, 2018 Sorry, I missed this build. NICE! Very interesting subject matter. Good to see things outside the ordinary from time to time. Hope you get back on it soon, looks like it will be a great model once finished. Bill Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.