Adam1818 Posted July 23, 2017 Share Posted July 23, 2017 So I got my canmilair decals and it says to cover them with some decal film before use...anyone have experience with these? Any tips on proper application of these?? Quote Link to post Share on other sites
phantom Posted July 23, 2017 Share Posted July 23, 2017 Oh yes, very needed. Use the decal film by the same guys that make Micro sol and micro set. DO NOT USE the micro sol or set, use the decal film made by the same company. Just hand brush it on the decal, let it dry for a couple hours. Cut and stick in water. Place on model. Used Canmilair LOTS of times. In fact, yesterday. Quote Link to post Share on other sites
dnl42 Posted July 23, 2017 Share Posted July 23, 2017 FWIW, I managed to destroy a decal by hand brushing that stuff; never problems airbrushing it. Most certainly my fault. To be clear, they weren't Canmilair decals. Quote Link to post Share on other sites
ALF18 Posted July 24, 2017 Share Posted July 24, 2017 1 hour ago, dnl42 said: FWIW, I managed to destroy a decal by hand brushing that stuff; never problems airbrushing it. Most certainly my fault. To be clear, they weren't Canmilair decals. I always hand-brush my decal film onto Canmilair decals. Have never had a problem with it, so if I can't screw it up, you should be safe! ALF Quote Link to post Share on other sites
Colin K Posted July 24, 2017 Share Posted July 24, 2017 Same as Shawn and Dan. Just brush on the Micro Decal Film, let dry. No problems. Quote Link to post Share on other sites
Adam1818 Posted July 24, 2017 Author Share Posted July 24, 2017 Perfect thanks for the reply! I'll have to pick some up as I only have set and sol Quote Link to post Share on other sites
willow45 Posted July 28, 2017 Share Posted July 28, 2017 Thank you for the tips here, I'm gonna get the Canmilair decals as well. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.